Visualization of flameholding mechanisms in a supersonic combustor using PLIF

Laser-induced fluorescence of OH and CH₂O was imaged to investigate the flame stabilization mechanism in a flameholder with a Mach 2.4 free stream. Ethylene was burned in a rectangular cavity with two points of injection: the aft wall and the cavity floor. When injected from the aft wall, the fuel came into immediate contact with hot combustion products from the reaction zone under the shear layer. Primary combustion occurred under the shear layer and in the aft region of the cavity volume. In contrast, when fuel was injected from the floor, a jet-driven recirculation zone of hot products near the upstream wall of the cavity served as a flameholder. The reaction then occurred on the underside of the shear layer. In conditions near lean blowout, significant changes in the flameholding mechanisms were observed. Improved CH₂O fluorescence signal was obtained by taking advantage of the long fluorescence lifetime at low pressures and delaying the camera gate to reduce the background signal.     

一类超混沌系统的广义同步研究

研究了一类四维超混沌系统的广义同步问题，基于稳定性理论得到控制器的解析表达式，分别实现了相同结构和异结构超混沌系统的广义同步，全局同步和相同步。数值计算与理论分析一致。     

The effect of photocrosslinkable groups on thermal stability of bulk heterojunction solar cells based on donor–acceptor‐conjugated polymers

Three different types of photocrosslinkable groups into a low band‐gap donor–acceptor‐conjugated polymer, namely poly{benzo[1,2‐b:4,5‐b′]dithiophene‐alt‐ thieno[3,4‐b]thiophene} (PBT), were developed to comparatively investigate the effect of the photocrosslinkable groups on the thermal stability of bulk heterojunction solar cells. Compared with vinyl groups, bromine‐ and azide‐ photocrosslinkable groups are more prompt for photocrosslinking to yield a denser crosslinking network, probably due to the different crosslinking mechanisms and reaction rates. In contrast to the reference device decreasing to less than 10% of its initial efficiency value after 80 h of annealing at 150 °C, a great improvement in the thermal stability of performance of all these crosslinked functional copolymers devices demonstrates that photocrosslinking can effectively improve the thermal stability of the active layer by suppressing [6,6]‐phenyl‐C₆₁‐butyric acid methyl diffusion and phase separation. Furthermore, the solar cells with crosslinked bromine‐ and azide‐functionalized PBT polymers showed very thermally stable photovoltaic device performance by retaining 78 and 66% of their initial device efficiency, respectively, whereas vinyl‐functionalized PBT devices retained only 51% of its initial value after long‐time thermal annealing. This suggests that an appropriate crosslinking network with homogenous active morphology could dramatically enhance the device stability without sacrificing the performance. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4156–4166     

Nonuniform stability properties and perturbing lyapunov functions

In this paper, without assuming the conditions everywhere, we study nonuniform stability properties of differential systems by employing the method of perturbing Lyapunov functions and splitting the given system suitably     

Phosphoric acid‐doped imidazolium ionomers with enhanced stability for anhydrous proton‐exchange membrane applications

Phosphoric acid‐doped crosslinked proton‐conducting membranes with high anhydrous proton conductivity, and good chemical stability in phosphoric acid were synthesized and characterized. The synthetic procedure of the acid‐doped composite membranes mainly involves the in situ crosslinking of polymerizable monomer oils (styrene and acrylonitrile) and vinylimidazole, and followed by the sulfonation of pendant imidazole groups with butanesultone, and further doped with phosphoric acid. The resultant phosphoric acid‐doped composite electrolyte membranes are flexible and show high thermal stability and high‐proton conductivity up to the order of 10^?2 S cm^?1 at 160 °C under anhydrous conditions. The phosphoric acid uptake, swelling degree, and proton conductivity of the composite membranes increase with the vinylimidazole content. The resultant composite membranes also show good oxidative stability in Fenton's reagent (at 70 °C), and quite good chemical stability in phosphoric acid (at 160 °C). The properties of the prepared electrolyte membranes indicate their promising prospects in anhydrous proton‐exchange membrane applications. © 2013 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2013 , 51, 1311–1317     

Improvement of pour point and oxidative stability of synthetic ester basestocks for biolubricant applications

For environmental reasons, as well as the dwindling source of petroleum, a new class of environmentally acceptable and renewable biolubricants based on plant oils is available. Even though plant oils possess excellent lubricant-related properties, there are some concerns about using it as biolubricant base oil. In this study we present a series of structures derived from oleic acid to be used as synthetic biolubricant basestocks. Measuring of pour point (PP), flash point, viscosity index (VI), oxidation onset temperature (OT) and signal maximum temperature (SMT) was carried out for each compound. Furthermore, the friction and wear properties were measured using a high-frequency reciprocating rig (HFRR). The resulting product structures were confirmed by NMR and FTIR spectroscopic analysis. The results showed that ethylhexyl 9-(octanoyloxy)-10-(behenoxy)octadecanoate with behenyl mid-chain ester exhibited the most favorable low temperature performance (PP ?48 °C) and ethylhexyl 9-(octanoyloxy)-10-(octyloxy)octadecanoate octyl mid-chain ester exhibited higher oxidation stability (OT 142 °C) than the other synthetic ester oils. On the other hand, the highest ball wear scan diameter was obtained for ethylhexyl 9-(octanoyloxy)-10-(behenoxy)octadecanoate while the lowest value was obtained for 9-hydroxy-10-octyloxyoctadecanoic acid. Overall, it was concluded that these synthetic ester oils have potential in formulation of industrial fluids for different temperature applications.     

Periodic solution of a chemostat model with variable yield and impulsive state feedback control

In this paper, a chemostat model with variable yield and impulsive state feedback control is considered. We obtain sufficient conditions of the globally asymptotical stability of the system without impulsive state feedback control. We also obtain that the system with impulsive state feedback control has periodic solution of order one. Sufficient conditions for existence and stability of periodic solution of order one are given. In some cases, it is possible that the system exists periodic solution of order two. Our results show that the control measure is effective and reliable.     

非自治Lotka—Volterra竞争系统

讨论了一般ｎ个种群的非自治Ｌｏｔｋａ－Ｖｏｌｔｅｒｒａ竞争系统，给出了系统的正解灭绝的一个充分条件。文献「１，２」中的主要结果被很好地推广。     

石油沥青质在烃中的稳定性研究

石油是以沥青质为分散相的非水胶体体系[1,2 ] 。研究认为 ,石油中沥青质的沉淀和絮凝 ,对石油开采及输送有十分重要的影响 [3]。提高沥青质在石油中的胶体稳定性 ,可强化石油加工过程中的重油减压蒸馏、催化裂化、减粘裂化及延迟焦化等过程[1,2 ] ,是提高炼厂轻质油收率、改善产品质量、提高综合经济效益的重要途径。国外关于沥青质在烃类介质中的稳定性研究报道较多 ,大多侧重于胶质对沥青质的稳定作用。由于胶质和沥青质均为由多种复杂结构分子组成的混和物 ,探讨胶质对沥青质的稳定机理极端困难 ,Chia-Lu Chang[4 ]等定量讨论了沥青质…     

Active control of time-delay in cutting vibration

The system dynamics of turning processes can be described by a delay differential equation. How to improve the stability and suppress the vibration of cutting is of an interesting topic. In this paper, a multiple time-delay controller is developed based on discrete optimal control method for the turning vibrations control. Numerical simulations are carried out to verify the efficiency of the controller. Results indicate the designed controller can suppress the cutting vibration efficiently and improve the stability of the cutting processes. The influence of designed time-delay and sampling time on the control performance is also discussed.