冲击引起石墨→金刚石相转变机理的探讨

 通过对冲击引起石墨转变为金刚石两种相转变模型的比较和冲击波在疏松介质中传播特性的分析,研究了在冲击波阵面内形成热斑的机制和引起原子发生异常迁移的机制,进而探讨了在冲击波阵面内,在热斑区,石墨→金刚石的相变过程,以及卸载时金刚石的石墨化过程。     

生物组织光学参数的离体和在体无损测量

利用漫反射无损测量装置对实际生物组织的光学性质进行了测量,同时对人体前臂进行了在体测量,利用漫射近似所得到的两个解析表达式,对实验数据进行非线性拟合得到了两组光学特性参数,与其它文献中的结果相比较,一方面证实了我们实验设计的可行性,另一方面验证了漫射近似所得到的两个解析表达式之一更准确一些.     

黏胶废液对福建无烟煤水蒸气催化气化的动力学和补偿效应

采用黏胶废液为催化剂,对福建尤溪无烟粉煤在常压热分析仪中的水蒸气催化气化动力学进行了研究。在850℃～950℃测定了黏胶废液催化剂添加量（NaOH浓度为计算基准）从0～12%时的碳转化率随气化时间的变化,表明黏胶废液具有提高碳转化率和气化速率的作用,同时确定了该黏胶废液催化剂的加载饱和浓度。基此得出的尤溪无烟粉煤水蒸气催化气化反应动力学符合缩芯模型,并给出相应的动力学参数。进而分析表明,该催化气化过程存在明显的补偿效应,最后给出黏胶废液对尤溪无烟粉煤水蒸气催化气化包括补偿效应的动力学方程。     

Kinetic and Stoichiometric Parameters in the Production of Carotenoids by <Emphasis Type="Italic">Sporidiobolus salmonicolor</Emphasis> (CBS 2636) in Synthetic and Agroindustrial Media

With the objective of determining the kinetic behavior (growth, substrate, pH, and carotenoid production) and obtain the stoichiometric parameters of the fermentative process by Sporidiobolus salmonicolor in synthetic and agroindustrial media, fermentations were carried out in shaken flasks at 25°C, 180 rpm, and initial pH of 4.0 for 120 h in the dark, sampling every 6 h. The maximum concentrations of total carotenoids in synthetic (913 μg/L) and agroindustrial (502 μg/L) media were attained approximately 100 h after the start of the fermentative process. Carotenoid bioproduction is associated with cell growth and the ratio between carotenoid production and cell growth (Y _P/X) is 176 and 163 μg/g in the synthetic and agroindustrial media, respectively. The pH of the agroindustrial fermentation medium varied from 4.2 to 8.5 during the fermentation. The specific growth rate (μ _X) for S. salmonicolor in synthetic and agroindustrial media was 0.07 and 0.04 h⁻¹, respectively. The synthetic medium allowed for greater productivity, obtaining maximum cell productivity (P _x) of 0.08 g L⁻¹ h⁻¹ and maximum total carotenoid productivity (P _car) of 14.2 μg L⁻¹ h⁻¹. Knowledge of the kinetics of a fermentative process is of extreme importance when transposing a laboratory experiment to an industrial scale, as well as making a quantitative comparison between different culture conditions.     

New Nitriminotetrazoles – Synthesis,Structures and Characterization

The reactions of 5‐nitriminotetrazole ( 4 ) with 1‐methyl‐5‐aminotetrazole ( 2 ) as well as 2‐methyl‐5‐aminotetrazole ( 3 ) were investigated. In the first reaction 2 was protonated yielding 1‐methyl‐5‐aminotetrazolium 5‐nitrimino‐1H‐tetrazolate monohydrate ( 7 ). In the latter case no protonation could be observed and a co‐crystallization of 5‐nitraminotetrazole and 2‐methyl‐5‐aminotetrazole was obtained. In this compound a new tautomer of 4 could be found. Both products were determined by low temperature single crystal X‐ray diffraction, IR, Raman and multinuclear (¹H, ¹³C, ¹⁵N) NMR spectroscopy, elemental analysis as well as differential scanning calorimetry. In addition the heats of formation were calculated using experimentally obtained heats of combustion. With these and the X‐ray densities several detonation parameter were computed using the EXPLO5 software. In addition the sensitivities towards impact, friction and electrostatic discharge were determined. Further, two crystal structures of the important starting materials in energetic research 5‐nitriminotetrazole monohydrate ( 4 ·H₂O) and 1‐methyl‐5‐nitriminotetrazolemonohydrate ( 5 ·H₂O) are presented and compared with the water‐free compounds. The heats of formation of 4 , 4 ·H₂O, 5 , 5 ·H₂O have been calculated by the atomization method using the CBS basis set. Inclusion of crystal water decrease heats of formation about 265 kJ mol^?1. Also the influence of crystal water on sensitivities (impact, friction, electrostatic discharge) but also performance is discussed.     

Local effects of atomizing analyte droplets on the plasma parameters of the inductively coupled plasma

Monodisperse droplets from aqueous analyte solutions with selected diameters in the range 35–67 µm are introduced into an inductively coupled plasma with frequencies between 1 to 10 droplets per second. The effect of desolvation and atomization in the ICP is studied end-on by optical emission spectroscopy employing simultaneously up to three calibrated monochromators with fast photomultipliers. The onsets of desolvation and analyte atomization and the extremely fast diffusion of hydrogen in the ICP and its effect on the plasma are studied by simultaneous measurements of hydrogen, analyte and Ar lines. The local cooling by analyte atomization as well as the recovering of the plasma excitation temperature after completed atomization is measured quantitatively in dependence on time applying the Boltzmann plot method to simultaneously recorded line intensities of atomized analyte atoms which act as plasma probes. Furthermore, it is shown that relatively small differences in analyte mass cause significant temperature changes during atomization and, as consequence, strong variations of the emission intensity of analyte lines during atomization if measured by end-on observation.     

Influence of physical-chemical interactions on the thermal stability and surface properties of poly(vinyl chloride)-b-poly(hydroxypropyl acrylate)-b-poly(vinyl chloride) block copolymers

The synthesis of poly(vinyl chloride) (PVC) homopolymers and poly(vinyl chloride)-b-poly(hydroxypropyl acrylate)-b-poly(vinyl chloride) (PVC-b-PHPA-b-PVC) block copolymers via a single electron - degenerative transfer mediated living radical polymerisation was carried out on a pilot scale in industrial facilities. The thermal stability of the products was assessed conductimetrically. The block copolymers, that contained a low content of PHPA (below 12 wt.%), showed thermal stability that was approximately three times greater than that of conventional PVC. Inverse gas chromatography study of the copolymers surface showed that there was a decrease in the dispersive component and greater Lewis acidity and basicity constants were observed relative to those of PVC. The thermal stabilisation of PVC when in the presence of PHPA is explained by the interactions between its functional groups and the structures formed during the thermal degradation. The thermal stability and the surface properties of PVC-b-PHPA-b-PVC were strongly dependent on the molecular weight of the block copolymer. Lewis acid-base interaction parameters were determined and are interpreted as evidence of the PVC-b-PHPA-b-PVC compatibilising function in PVC-wood flour composites.     

Simultaneous determination of methyl- and ethyl-mercury by solid-phase microextraction followed by gas chromatography atomic fluorescence detection

A method for trace level determination of organomercury species in different biota matrixes by using aqueous-phase propylation followed by headspace solid-phase microextraction (HS-SPME) and gas chromatography (GC) coupled to pyrolysis-atomic fluorescence spectrometry (Py-AFS) detection has been optimized. To maximize peak area and symmetry factors of methylmercury (MeHg) and ethylmercury (EtHg) analyzed as propyl derivatives, carrier and make-up flow rates were optimized by a user-defined experimental design. A multiple response simultaneous optimization was applied using the desirability function to achieve global optimal operating conditions. They were attained at 2 and 6 mL min⁻¹ as carrier and make-up gas flow rates, respectively. In addition, pyrolyser temperature was also optimized, yielding the best value at 750 °C. Limits of detection and quantification at the optimum conditions were 0.04 ng g⁻¹ and 0.13 ng g⁻¹ for both, MeHg and EtHg. The developed analytical procedure was validated with a certified reference material (DORM-2) and applied to the determination of organomercury incurred in waterfowl egg and fish samples.     

姜黄素对酪氨酸-过氧化氢-酶催化产物的荧光猝灭机理研究

酪氨酸在辣根过氧化物酶催化下被H2O2氧化为强荧光物质(产物S),姜黄素对其荧光产生猝灭作用,根据Stern-Volmer方程和荧光寿命法研究了姜黄素对产物S的荧光猝灭为静态猝灭.姜黄素与产物S的形成常数K=9.51×108 L/mol(25℃),结合点数n=1.94.探讨了产物S与姜黄素的反应机理,该反应的热力学参数△G=-56.11 kJ\5mol-1,△H=57.37 kJ\5mol-1,△S=365.9 J\5K-1\5mol-1,说明该反应是自发进行的吸热过程.     

Adsorption of the lanthanum and thorium cryptates at mercury electrode

The adsorption behavior of cryptates of La³⁺ and Th⁴⁺ cations at the Hg/aqueous solution interface is studied by using the electrochemical impedance spectroscopy method. It was shown that the studied complexes have high surface activity at the interface. The lanthanum cryptate adsorption parameters are found using the regression analysis based on the two parallel capacitor model supplemented by the Frumkin adsorption isotherm. The differential capacitance curves calculated by using these parameters agree satisfactorily with the experimental ones. The more complicated adsorption behavior of lanthanum cryptate, as compared with the complexes of lower valence cations, is interpreted with taking into consideration the strong interaction of the La³⁺ cation contained in the [2.2.2.] cryptand intramolecular cavity with the supporting electrolyte anions.