长江经济带与“一带一路”沿线国家贸易地区结构的实证研究

利用贸易额的绝对值和指数实证分析了长江经济带与“一带一路”沿线国家的贸易地区结构. 结果表明: 长江经济带与“一带一路”沿线国家的贸易过于集中, 且进出口贸易的整体地区结构和主要10个国家的内部地区结构均有所优化, 但不甚明显, 其中出口的整体地区结构更为分散, 进口的内部地区结构更为均匀. 最后基于分析结果, 为促进长江经济带与“一带一路”沿线国家贸易地区结构合理化发展提出了建议.     

Metabolic profiling of normal and hypertensive rat kidney tissues by hrMAS-NMR spectroscopy

Intact kidney tissue samples of normal and spontaneously hypertensive rats (SHRs) were analyzed by hrMAS-NMR spectroscopy and principal component analysis (PCA). Radial components (cortex, outer stripe of the outer medulla, inner stripe of the outer medulla, and papilla) were sampled from various regions across the kidney from multiple animals in order to establish inter- and intra-animal variability. The effects of temperature were also measured. Papilla was differentiated from the other tissue types, and this variation by tissue type was greater than the effect of temperature on the samples (spectra were compared from samples at 2 and 30 °C). This study also revealed long term stability issues of tissue storage at -80 °C. The PCA showed that the greatest differentiation between normal rats and SHRs was found in the cortex and the regions in the NMR spectra that were correlated with this variation were identified.Abbreviations hrMAS High-resolution magic angle spinning - NMR Nuclear magnetic resonance - PCA Principal component analysis - CSA Chemical shift anisotropy - DD Dipolar coupling - SHR Spontaneously hypertensive rat     

Magtrieve™ (CrO2) and MnO2 mediated oxidation of aldoximes: studying the reaction course

Magtrieve™ (CrO₂) and MnO₂ mediated oxidation of aldoximes to nitrile oxides were studied in details. In presence of external radical source, TEMPO, these reagents did not furnish nitrile oxides, instead favoured deoximation to aldehydes. A common trend of deoximation was established from electronically tuned aldoximes, which is: aliphatic>aromatic>aldoximes with strong electron-withdrawing group, though the extent of deoximation was less in case of CrO₂. Above effects were not observed with chloramine-T and diacetoxyiodobenzene, reagents known to produce nitrile oxides via hydroximoyl halide or equivalent ionic intermediates. A putative reaction mechanism is proposed for MO₂ (M=Cr, Mn) mediated oxidation of aldoximes through formation of a nitroso-oxime tautomeric pair. Formation of nitrile oxide is possibly occurred from the oxime tautomer via a σ-type iminoxy radical intermediate. The deoximation process, dominating in presence of external radical environment, is explained following decomposition of the nitroso tautomer.     

Microwave assisted fluorination: an improved method for side chain fluorination of substituted 1-arylethanones

A two-step, one-pot microwave (MW) assisted fluorination of 1-arylethanones to their corresponding 1-aryl-2-fluoroethanones has been developed. The first step utilises Selectfluor™ as a fluorinating agent in methanol forming 1-aryl-2-fluoroethanones and their corresponding dimethyl acetals. In the second step, water is added and Selectfluor™ acts as a Lewis acid in the hydrolytic cleavage of the dimethyl acetals. Compared to the thermal synthesis, the MW assisted method leads to a reduction in reaction time both in the fluorination and for the dimethyl acetal cleavage. Moreover, the one-pot procedure reduces reagent and solvent consumption. The method is best suited for the preparation of 1-aryl-2-fluoroethanones containing substituents that deactivates electrophilic aromatic substitution, however highly electron deficient ketones such as 1-(3,5-dinitrophenyl)ethanone reacts more slowly. Reactions using electron rich aromatic ketones had a low regioselectivity, and also produced fluoroaromatic products.     

双螺杆冻胶纺丝法制备有机液体吸附功能纤维及其性能研究

在聚合釜中合成了BMA/HEMA二元共聚树脂,利用双螺杆纺丝机、采用冻胶纺丝技术制备了有机液体吸附功能纤维,研究了单体投料比中HEMA质量分数对纤维各种溶胀行为的影响,利用动态热机械分析仪(DMA)对纤维的动态力学性能进行了研究,同时利用环境扫描电子显微镜(SEM)观察了纤维的表面和断面形貌.结果表明,HEMA引入大分子后,所得纤维对有机液体甲苯、三氯乙烯具有吸附功能,且吸附过程符合sigmoidal模型中的Hill方程;随HEMA质量分数的增加,纤维对甲苯和三氯乙烯的饱和吸附量增大,对甲苯和三氯乙烯的最大吸附量分别可达10g/g和21g/g;随HEMA质量分数的增加,纤维剩余率增加的同时,使纤维对甲苯和三氯乙烯的握持能力增强;HEMA质量分数对纤维动态力学性能有突出影响,特别是链段运动受其影响更为明显;HEMA质量分数对纤维表面和断面形貌均有显著影响,特别是当HEMA质量分数为15wt%时,所得纤维表面出现了许多空洞,其断面存在许多尺寸不均的空洞.     

Acrylic fibers processing with ionic liquid as solvent

Ionic liquid, 1‐butyl‐3‐methylimidazolium chloride ([BMIM]Cl), was used as solvent for the polymerization of acrylonitrile (AN) and the resulting polymer solution was directly applied for spinning to produce polyacrylonitrile (PAN) fiber for the first time. Acrylic polymers with high content of AN, large molecular weight, and low polydispersity index (PDI) were prepared. The PAN macromolecules have little degradation during dissolution of PAN in [BMIM]Cl, which is completely different from the dissolution of biopolymers such as cellulose in ionic liquids. The PAN fiber with round profile and good mechanical properties was successfully spun from the PAN/[BMIM]Cl solution using dry–jet wet spinning technology. It suggests that an environmental friendly process for the acrylic fiber would be developed and the high performance PAN fiber would be obtained when the spinning conditions are optimized further. Copyright © 2008 John Wiley & Sons, Ltd.     

Structural development of ultra‐high strength polyethylene fibers: Transformation from kebabs to shishs through hot‐drawing process of gel‐spun fibers

Structural development of ultra‐high strength polyethylene fibers via hot‐drawing processes of as‐spun gel fibers was investigated by means of transmission electron microscopy. It is found that the shish‐kebabs developed in both the as‐spun and drawn fibers can be transformed continuously into the micro‐fibril structure composed mostly of the shish structure through the hot‐drawing process. The structure transformation involves a drastic decrease in diameter of the kebab plus the shish but almost no change in the shish diameter. This result suggests that the chains in the kebabs are incorporated into the shishs and consumed to extend the longitudinal dimension of the shishs during the drawing process. The proposed new deformation model well explains the relationship between the fiber morphology and their mechanical properties: the tensile strength and modulus of the fibers can be determined by the number of the shish in the fiber and the macroscopic diameter of the fiber, which are apriori determined at the spinning process. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1861–1872, 2010     

H-MCM-22沸石分子筛中Brnsted/Lewis酸协同效应的~1H 和~(27)Al双量子魔角旋转固体核磁共振研究

采用各种固体核磁共振 (NMR) 技术详细研究了 H-MCM-22 分子筛中 Brnsted/Lewis 酸的协同效应. 二维 1H 双量子魔角旋转 (DQ-MAS) NMR 结果表明, 在脱铝 H-MCM-22 分子筛中 Brnsted 酸位 (骨架桥式羟基) 和 Lewis 酸位 (非骨架铝羟基) 之间是空间邻近的, 暗示着可能存在 B/L 酸协同效应. 二维 27Al DQ-MAS NMR 结果揭示了各种铝物种之间的空间邻近性, 表明 B/L 酸协同效应优先发生在 H-MCM-22 分子筛超笼中的骨架 T6 位铝和非骨架铝物种之间. 2-13C-丙酮探针分子实验发现, 因 B/L 酸协同效应而导致脱铝 H-MCM-22 分子筛酸性明显增强, 氘代吡啶探针分子实验也证实在 H-MCM-22 分子筛的超笼中发生了 B/L 酸协同效应. 上述结果将有助于我们理解在脱铝 H-MCM-22 分子筛上发生的多相催化机理.     

Evidence of a phase transition of RbHCO3 from high-resolution solid-state 13C and 87Rb NMR by comparison with KHCO3

A variable-temperature high-resolution 13C and 87Rb solid-state NMR study of powder rubidium hydrogencarbonate, RbHCO3, is presented for the first time. At ambient temperature, RbHCO3 is formed by centrosymmetric dimers linked by hydrogen bonds, but almost no information is available on this compound concerning proton disorder and the low-temperature phase. However, potassium hydrogencarbonate, KHCO3, which has an isomorphic structure for the high temperature phase, was well studied: it undergoes a non-ferroic, non-ferroelectric phase transition at Tc = 318 K between two monoclinic structures. The protons are disordered in an asymmetric double-well potential in the low-temperature phase, and the double-well potential becomes symmetric in the high-temperature phase. By comparison with recent solid-state NMR experimental results on KHCO3, we show that RbHCO3 undergoes a phase transition at Tc approximately 245 K, and give evidence that the proton dynamic disorder in both compounds is very similar.     

Melt spinning of propylene carbonate‐plasticized poly(acrylonitrile)‐co‐poly(methyl acrylate)

The primary use of poly(acrylonitrile) (PAN) fibers, commonly referred to as acrylic fibers, is in textile applications like clothing, furniture, carpets, and awnings. All commercially available PAN fibers are processed by solution spinning; however, alternative, more cost‐effective processes like melt spinning are still highly desired. Here, the melt spinning of PAN‐co‐poly(methyl acrylate) (PMA) plasticized with propylene carbonate (PC) at 175°C is reported. The use of methyl acrylate (MA) as comonomer and PC as an external plasticizer renders the approach a combination of internal and external plasticization. Various mixtures of PAN and PC used in this work were examined by rheology, subjected to melt spinning, followed by discontinuous and continuous washing, respectively. The best fibers were derived from a PAN‐co‐PMA copolymer containing 8.1 mol‐% of MA having a number‐average molecular weight M _n of 34 000 g/mol, spun in the presence of 22.5 wt.‐% of PC. The resulting fibers were analyzed by scanning electron microscopy and wide‐angle X‐ray scattering (WAXS), and were subjected to mechanical testing.