A novel artificial bee colony detection algorithm for massive MIMO system

As a hot‐spot of 5G, the research on detection algorithms for massive multiple input multiple output (MIMO) system is significant but difficult. The traditional MIMO detection algorithms or their improvements are not appropriate for large scaled antennas. In this paper, we propose artificial bee colony (ABC) detection algorithm for massive MIMO system. As one advanced technology of swarm intelligence, ABC algorithm is most efficient for large scaled constrained numerical combinatorial optimization problem. Therefore, we employ it to search the optimum solution vector in the modulation alphabet with linear detection result as initial. Simulation and data analysis prove the correctness and efficiency. Versus the scale of massive MIMO systems from 64 × 64 to 1024 × 1024 with uncoded four‐quadrature‐amplitude‐modulation signals, the proposed ABC detection algorithm obtains bit error rate of 10 ^− 5 at low average received signal‐to‐noise‐ratio of 12 dB with rapid convergence rate, which approximates the optimum bit error rate performance of the maximum likelihood and achieves the theoretical optimum spectral efficiency with low required average received signal‐to‐noise‐ratio of 10 dB in similar increasing regularity, over finite time of low polynomial computational complexity of per symbol, where N_T denotes the transmitting antennas' number. The proposed ABC detection algorithm is efficient for massive MIMO system. Copyright © 2016 John Wiley & Sons, Ltd.     

频域反射法光纤延时精密测量

本文提出了一种应用于光纤延时系统中实现光纤延时精密测量的新方法,用以提高光纤延时测量的精度和准确性.该方法以1064 nm激光调制信号作为光源,通过测量回波信号的幅值和相位信息得到被测通道的频率响应,采用快速傅里叶逆变换得到被测目标的延时信息,实现光纤延时测量.本文通过理论分析和延时测量实验对频域反射法与传统的时域测量方法进行对比,使用频域反射法在调制频率范围10—200 MHz,采样频率间隔0.5 MHz的实验条件下,实现了3.3 ps延时测量分辨率,并证明了该方法具有比时域方法更高的测量精度,测量结果的准确性更好.     

Synthesis,structure, and character of two rare earth carboxylic acid complexes

Two rare earth carboxylic acid complexes, [Sm(MeBA)₃(2,2′-bipy)]₂·2(2,2′-bipy) (MeBA = 3-methylbenzoic acid; 2,2′-bipy = 2,2′-bipyridine) (1) and [Pr(MeBA)₃(H₂O)₂]_n?n(4,4′-bipy) (4,4′-bipy = 4,4′-bipyridine) (2), have been synthesized under hydrothermal conditions and structurally determined by single-crystal X-ray diffraction. Compound 1 is a dimer and further assembles into an infinite chain, two-dimensional net and three-dimensional supramolecular structure via weak π–π and C–H···π interactions. Some 2,2′-bipy coordinates with Sm and some exist by non-covalent C–H···π interactions. Compound 2 is a 1D infinite chain structure, with adjacent 1D chains connected into a 2D layer structure by O–H···N hydrogen bonds. The two complexes were characterized by elemental analyses, IR, photoluminescence, and TGA. In order to illustrate subtle structural characteristics of intermolecular interactions and magnetic sensitivity of the complex, 2D-IR correlation spectra (2D-IR COS) under magnetic perturbation for 1 were performed.     

Cobalt(II) porphyrin axially coordinated with 2′-(pyridin-4-yl)-5′-(pyridin-2-yl)-1′-(pyridin-2-ylmethyl)-2′,4′-dihydro-1′H-pyrrolo[3′,4′ : 1,2](C60-Ih)[5,6]fullerene: formation,chemical structure,and spectroscopic properties

Construction of new effective photovoltaic devices based on organic dyes has important implications for modern and future technologies. In this article, we studied the equilibrium, the rate, and the spectral manifestation of the reaction of [(2,3,7,8,12,18-hexamethyl,13,17-diethyl,5-(2-pyridyl)porphyrinato)cobalt(II)]–[2′-(pyridin-4-yl)-5′-(pyridin-2-yl)-1′-(pyridin-2-ylmethyl)-2′,4′-dihydro-1′H-pyrrolo[3′,4′ : 1,2](C₆₀-I_h)[5,6]fullerene] triad formation as well as its spectral properties and photo electrochemical behavior. The cobalt porphyrin–pyridyl-substituted fullerene mixtures in toluene are self-assembling systems due to axial donor–acceptor binding between Co of the porphyrin complex and N-pyridyl of the substituted fullerene. The formation rate constant, k^298K, and the stability constant, K^298K, of donor–acceptor triad formed by coordination of two substituted fullerene molecules to Co porphyrin are (44.4 ± 0.8) mol L^?1 s^?1 and (56 ± 16)×10⁷ L² mol^?2, respectively. Modification of the titanium electrode coated with the natural oxide film was carried out using the porphyrin–fullerene triad and its individual components. Photopotential and photocurrent density of the system with modified electrode were studied. The obtained results are of interest for creating porphyrin-based donor–acceptor systems as components in organic photovoltaics.     

Elemental Analysis of Phytotherapeutic Products by Inductively Coupled Plasma–Tandem Mass Spectrometry

A procedure for the determination of As, Cd, Cr, Ni, Pb, and V in phytotherapy medicines by inductively coupled plasma–tandem mass spectrometry is reported. The use of tandem mass spectrometry with oxygen into an octopole reaction system at various gas flow rates and the combination of on-mass and mass-shift modes was evaluated. Cadmium, Cr, Ni, and Pb were determined as free atomic ions while As and V were determined as the oxides AsO⁺ and VO⁺ in the same run. Samples were prepared by microwave-assisted digestion with dilute nitric acid and hydrogen peroxide. Two plant-certified reference materials (apple leaves and tomato leaves) were used to check the accuracy. For tandem mass spectrometry with 0.5?mL min^?1 O₂, recoveries in the 85–113% were typically obtained and no statistical differences were observed at the 95% confidence level (t-test) in comparison with the certified values. Using these conditions, the limits of detection for the method were 0.01, 0.0002, 0.008, 0.008, 0.003, and 0.002?µg g^?1 for As, Cd, Cr, Ni, Pb, and V, respectively. The procedure was used for the analysis of four phytotherapic drugs and the determined concentrations were up to 0.168?µg g^?1 As, 0.03?µg g^?1 Cd, 0.82?µg g^?1 Cr, 1.18?µg g^?1 Ni, 0.52?µg g^?1 Pb, and 2.4?µg g^?1 V with average precision values of 8% as the relative standard deviation. The found concentrations were compared with limits proposed in official guidelines and, in most cases, the values were below the maximum limits allowed.     

The chemical bonding and spectral assignments of rhodium(III)‐catalyzed closo‐dodecaborate complexes: Ab initio study

The chemical bonding and spectral assignments of rhodium(III)‐catalyzed closo‐dodecaborate (RhCD) complex are systematically studied using the density functional theory calculations. It is found that the calculated main bond lengths of framework are in good agreement with experimental X‐ray observation, and the pronounced hybridization of B‐2p and Rh‐4d states is responsible for the structural stability, reflected by the large dissociation energy and HOMO–LUMO energy gap. The AdNDP chemical bonding analysis indicates that the RhCD complex can be stabilized by two H‐bridged 3c‐2e σ‐bonds (B‐H‐Rh triangles). Additionally, the theoretical calculations reproduce well the main experimental IR spectrum, and the characteristic peaks are properly assigned. These results will be helpful for further insight into the unique electronic structure of the species, and provide valuable references for potential applications in novel materials.     

Theoretical approaches for predicting the color of rigid dyes in solution

Aiming at developing an affordable and easily implementable computational protocol for routine prediction of spectral properties of rigid molecular dyes, density functional theory, and time‐dependent density functional theory were used in conjunction with a vibronic coupling scheme for band shape estimate. To predict the perceived color of molecules in solution, a model has been setup linking the UV‐vis spectra predicted at ab initio level to the L *a *b * colorimetric parameters. The results show that a mixed protocol, implying the use of a global hybrid functional for the prediction of adiabatic energy differences and a range separated hybrid for the prediction of potential energy curvature, allows perceived colors to be quantitatively predicted, as demonstrated by the comparison of L *a *b * colorimetric parameters obtained from computed and experimental spectra. © 2017 Wiley Periodicals, Inc.     

Sensitivity of the NTB phase formation to the molecular structure of imino-linked dimers

ABSTRACT

Here we report on the synthesis and mesomorphic properties of a series of imino-linked dimeric molecules. In order to improve our understanding of the structure–N_TB phase correlations, we have studied the impact of geometric and electronic factors arising from varying mesogenic units, different spacer lengths and from the ratio (n/m) between the lengths of terminal chains (n) and spacer (m). From the perspective of the molecular geometry, the results show that the stability of the N_TB phase results from increasing effective molecular bending and with the broadening of the mesogenic unit, in particular near the spacer, and that the n/m ratio plays a substantial role in conjunction with the specific mesogenic unit. A computational study of the electronic properties shows that a broadening of the mesogenic core in the vicinity of the spacer is associated with an increased anisotropy of the electrostatic potential distribution. Within a given series of materials our study suggests that the incidence of the N_TB phase and its thermal stability are governed by the synergy of specific geometrical factors and the anisotropy of the electrostatic potential distribution of the mesogenic core.     

Spectral study and classification of worldwide locations considering several multijunction solar cell technologies

Multi‐junction solar cells are widely used in high‐concentration photovoltaic systems (HCPV) attaining the highest efficiencies in photovoltaic energy generation. This technology is more dependent on the spectral variations of the impinging Direct Normal Irradiance (DNI) than conventional photovoltaics based on silicon solar cells and consequently demands a deeper knowledge of the solar resource characteristics. This article explores the capabilities of spectral indexes, namely, spectral matching ratios (SMR), to spectrally characterize the annual irradiation reaching a particular location on the Earth and to provide the necessary information for the spectral optimization of a MJ solar cell in that location as a starting point for CPV module spectral tuning. Additionally, the relationship between such indexes and the atmosphere parameters, such as the aerosol optical depth (AOD), precipitable water (PW), and air mass (AM), is discussed using radiative transfer models such as SMARTS to generate the spectrally resolved DNI. The network of ground‐based sun and sky‐scanning radiometers AErosol RObotic NETwork (AERONET) is exploited to obtain the atmosphere parameters for a selected bunch of 34 sites worldwide. Finally, the SMR indexes are obtained for every location, and a comparative analysis is carried out for four architectures of triple junction solar cells, covering both lattice match and metamorphic technologies. The differences found among cell technologies are much less significant than among locations. Copyright © 2016 John Wiley & Sons, Ltd.     

NEW METHOD FOR LOW ORDER SPECTRAL MODEL AND ITS APPLICATION

In order to overcome the deficiency in classical method of low order spectral model, a new method for low order spectral model was advanced. Through calculating the multiple correlation coefficients between combinations of different functions and the recorded data under the least square criterion, the truncated functions which can mostly reflect the studied physical phenomenon were objectively distilled from these data. The new method overcomes the deficiency of artificially selecting the truncated functions in the classical low order spectral model. The new method being applied to study the inter-annual variation of summer atmospheric circulation over Northern Hemisphere, the truncated functions were obtained with the atmospheric circulation data of June 1994 and June 1998. The mechanisms for the two-summer atmospheric circulation variations over Northern Hemisphere were obtained with two-layer quasi-geostrophic baroclinic equation.