Effect of hardness and composition gradients on Barkhausen emission in case hardened steel

The effect of gradients in hardness, structure and composition in the surface layers on magnetic Barkhausen noise (MBN) was investigated in two widely used low alloy steels. One material was case hardened by induction hardening. The other was case carburised. Similar hardness profiles were produced by the two treatments. It was found that the variation in structure and hardness through the case in the induction-hardened steel had a minor effect on the MBN profile. In contrast, the inhomogeneity in the case-carburised material showed up clearly. This took the form of a broadened or two-peak MBN profile. When the surface layer containing the case was removed by etching, the broadened profile was replaced by a profile with a single peak. It is concluded that the shape and position of the MBN profile is significantly affected when a gradient in microstructure is induced by a gradient in carbon content. On the other hand, a gradient in microstructure induced by heat treatment with a constant carbon level has much less affect on the MBN profile for the induction-hardened steel.     

Residual currents and corridor of flow in the Rio de la Plata

The Rio de la Plata is a large and shallow water body that discharges onto the Atlantic Ocean. The main driving forces for the river flow are the bathymetry, tides, the outflow from the Paraná and Uruguay rivers and the winds. A numerical model covering the entire river was set up with the objective of increasing our understanding of the hydrographical features and morphological dynamics in the Estuary. The simulations revealed a counter-clockwise residual circulation in the Samborombón Bay and an eastward net flow near the Uruguayan coast. The residual flow is forced by both the tides and the bathymetry. The residence time for the entire river ranges from 40 to 80 days. However, residence times above 120 days was found in the Samborombón Bay. Three corridors of flow have been identified.     

拟因子试验设计在生产中的应用

根据生产实际,综合利用并列、赋闲列和拟水平试验设计,运用多重比较进行方差分析,寻找水泥熟料的最佳工艺.不仅解决了不同水平多因素试验问题,同时还可考虑交互作用,大大减少了试验次数,从而提高经济效益.     

正态分布下任意秩有限总体中的Minimax预测

对于任意秩有限总体,在二次损失下,有关文献已给出了线性可预测变量在齐次线性预测类中的唯一线性Minimax预测．本文在正态假设下,证明了这个线性Minimax预测也是线性可预测变量在一切预测类中的唯一Minimax预测．     

Speedup estimates for some variants of the parallel implementations of the branch-and-bound method

The efficiency of parallel implementations of the branch-and-bound method in discrete optimization problems is considered. A theoretical analysis and comparison of two parallel implementations of this method is performed. A mathematical model of the computation process is constructed and used to obtain estimates of the maximum possible speedup. Examples of problems in which none of these two parallel implementations can speed up the computations are considered.     

A Joint Integral Test for the Locations of Extrema for Brownian Motion

Let μ⁺(t) and μ⁻(t) be the locations of the maximum and minimum, respectively, of a standard Brownian motion in the interval [0,t]. We establish a joint integral test for the lower functions of μ⁺(t) and μ⁻(t), in the sense of Paul Lévy. In particular, it yields the law of the iterated logarithm for max(μ⁺(t),μ⁻(t)) as a straightforward consequence. Our result is in agreement with well-known theorems of Chung and Erdős [(1952) Trans. Amer. Math. Soc. 72, 179–186.], and Csáki, F?ldes and Révész [(1987) Prob. Theory Relat. Fields 76, 477–497].      

用三个关系式与Mathematica软件求第二类自然数幂和公式

首先介绍三个第二类自然数幂和关系式并对其中的两式给出证明,接着利用这些关系式与数学软件M athem atica4.0,给出求解第二类自然数幂和公式的若干机械计算方法.     

Property improvement of pulsed laser deposited boron carbide films by pulse shortening

Growth characteristics and surface morphology of boron carbide films fabricated by ablating a B₄C target in high vacuum with a traditional KrF excimer laser and a high brightness hybrid dye/excimer laser system emitting at the same wavelength while delivering 700 fs pulses are compared. The ultrashort pulse processing is highly effective. Energy densities between 0.25 and 2 J cm⁻² result in apparent growth rates ranging from 0.017 to 0.085 nm/pulse. Ablation with nanosecond pulses of one order of magnitude higher energy densities yields smaller growth rates, the figures increase from 0.002 to 0.016 nm/pulse within the 2-14.3 J cm⁻² fluence window. 2D thickness maps derived from variable angle spectroscopic ellipsometry reveal that, when ablating with sub-ps pulses, the spot size rather than the energy density determines both the deposition rate and the angular distribution of film material. Pulse shortening leads to significant improvement in surface morphology, as well. While droplets with number densities ranging from 1 × 10⁴ to 7 × 10⁴ mm⁻² deteriorate the surface of the films deposited by the KrF excimer laser, sub-ps pulses produce practically droplet-free films. The absence of droplets has also a beneficial effect on the stoichiometry and homogeneity of the films fabricated by ultrashort pulses.     

A simple model to extract hyperfine interaction distributions from Mössbauer spectra

The general problem of finding a distribution in hyperfine interaction parameters from experimental Mössbauer spectra is outlined. Existing methods may lack flexibility to be easily applicable to simple problems. A line shape for hyperfine parameter distributions is given, which is based on linear segments in the probability function. This method is applied in the analysis of samples containing iron in a silicate glass.     

Semiconvergence in distribution of random closed sets with application to random optimization problems

The paper considers upper semicontinuous behavior in distribution of sequences of random closed sets. Semiconvergence in distribution will be described via convergence in distribution of random variables with values in a suitable topological space. Convergence statements for suitable functions of random sets are proved and the results are employed to derive stability statements for random optimization problems where the objective function and the constraint set are approximated simultaneously. The author is grateful to two anonymous referees for helpful suggestions.