二维金属有机框架材料的合成及电催化应用

二维金属有机框架材料(MOFs)由于具备高比表面积、 多孔性以及丰富的活性位点等优异特性而受到广泛关注, 并且在电催化领域展现出巨大的应用潜力. 研究者们已在二维MOFs的可控制备与电催化性能调控方面取得许多突破性进展, 显示出相关研究对开发高性能电催化剂的关键作用. 本文总结了二维MOFs的自上而下和自下而上合成策略以及二维MOFs衍生物的典型合成方法, 概述了二维MOFs在各尺度下的电催化性能调控策略, 并介绍了各种合成方法和调控策略在电催化中的应用. 最后讨论了该领域面临的挑战, 并对未来的发展方向进行了展望.     

光阑对偏振高斯-谢尔模型光束偏振特性的影响（英文）

根据广义惠更斯-菲涅尔原理和Collins公式,基于复高斯函数展开法,推导出椭圆偏振的高斯-谢尔模型光束经过矩形光阑衍射后的交叉谱密度公式,结合斯托克斯矢量理论推导了椭圆偏振高斯-谢尔模型光束在接收平面的光强、偏振度、方位角和椭圆度的表达式,数值分析了光阑的孔径遮拦比对光强、偏振度及方位角和椭圆度的影响.结果表明,光阑的孔径遮拦比在近场区对经过光阑后椭圆偏振高斯-谢尔模型光束的光强和偏振特性有显著影响;随着传输距离的增大,光强和偏振特性受孔径遮拦比的影响减小,光强和偏振特性变化平稳.     

Optimal design of non-equilibrium experiments for genetic network interrogation

Many experimental systems in biology, especially synthetic gene networks, are amenable to perturbations that are controlled by the experimenter. We developed an optimal design algorithm that calculates optimal observation times in conjunction with optimal experimental perturbations in order to maximize the amount of information gained from longitudinal data derived from such experiments. We applied the algorithm to a validated model of a synthetic Brome Mosaic Virus (BMV) gene network and found that optimizing experimental perturbations may substantially decrease uncertainty in estimating BMV model parameters.     

电感耦合等离子体原子发射光谱法测定人造金刚石中铁、钴、锰、镍

1引言近年来,我国人造金刚石的产量和应用有了很大的发展。以现有的人造金刚石合成技术,通常以Fe,Ni,Co,Mn等元素组成的合金作为触媒,这使人造金刚石中极易残留这些金属组成的包裹体。诸多研究表明,包裹体含量和分布情况对人造金刚石的性能有着重要影响[1]。经查阅文献,已有使用X射线荧光光谱法对人造金刚石中杂质元素含量进行半定量分析的报道[2]。电感耦合等离子体发射光谱法(ICP-AES)被广泛应用于岩矿、土壤样品中多元素分析[3]。本实验以在大气气氛中高温灰化和混合酸对样品进行前处理,采用ICP-AES测定人造金刚石中Fe,Co,Ni和Mn。本方法操作简便,处理效果良好。     

An Easy Access to Oxime Ethers by Pd‐Catalyzed C—O Cross‐Coupling of Activated Aryl Bromides with Ketoximes and Chalcone Oximes

An efficient Pd‐catalyzed method for C—O cross‐coupling of ketoximes and chalcone oximes with activated aryl bromides and bromo‐chalcones has been developed. All oxime ethers were obtained in good to excellent yields by [(π‐allyl)PdCl]₂/tBuXPhos ( L7 ) catalyst system. TrixiePhos ( L11 ) was also found to be effective for the oxime coupling. This method offers an easy and smooth coupling of chalcone oximes with activated aryl bromides and bromo‐chalcones, which has not been previously explored.     

Interaction with plasmid DNA of Hoechst-TACN conjugates

ABSTRACT

A new family of conjugates between the Hoechst minor groove binder and the TACN metal ion ligand connected through hydrophobic alkyl or more hydrophilic oxyethyl linkers of different length has been prepared. The linkers are connected to the convex side of the Hoechst skeleton thus forcing the TACN ligand to exit the minor groove and interact with the phosphate backbone of DNA. The conjugates preserve the binding mode of Hoechst with an affinity influenced by the nature of the linker, the more hydrophobic being the more efficient. Coordination of Cu(II) or Zn(II) poorly affect these parameters. Nevertheless, the Zn(II) complex bearing a C6 linear alkyl linker induced a modest but reproducible acceleration of the hydrolytic cleavage of DNA which can be ascribed to the ability of the conjugate to deliver the hydrolytic subunit close to the DNA phosphodiester bonds.     

Effective synthesis of bicyclodienes via palladium-catalyzed asymmetric allylic alkylation and ruthenium-catalyzed cycloisomerization

[n.3.0]Bicycles (n = 3–6) can be synthesized using palladium-catalyzed asymmetric allylic alkylation followed by ruthenium-catalyzed cycloisomerization. New types of triarylphosphino-1,2-diaminooxazoline ligands show the same high levels of enantioselectivity observed with Trost ligand when employed in Pd-catalyzed allylic alkylation reactions. The enyne products of these allylic alkylation reactions were further elaborated using a Ru-catalyzed redox isomerization process, for which a mechanism is proposed.     

New method of formation design for both GMTI and InSAR using distributed satellites

This letter proposes a method for designing a specific formation of satellites where the flying motion only exists in a circle orbit plane of the reference satellite, which means that the orbit eccen- tricity is zero. This method combines the Hill equation, the Kepler equation, and the geometrical meaning of orbit elements. It creates the redundancy condition to simplify the deducing process, utilizes multiple conditions to solve the orbit elements for the satellite formation, and obtains the analytical relationship of the orbit elements for the formation satellites with the formation parameters and the orbit elements of the reference satellite. Using these formulations, the orbit elements and formation parameters for the formation satellites can be solved for the given orbit elements of the reference satellite. The letter describes the proposed double-ellipse formation for both GMTI and InSAR, and the validity of the formation is demonstrated via simulation.     

Algorithm of SAR satellite attitude measurement using GPS aided by kinematic vector

In this paper,in order to improve the accuracy of the Synthetic Aperture Radar (SAR) satellite attitude using Global Positioning System (GPS) wide-band carrier phase,the SAR satellite attitude kinematic vector and Kalman filter are introduced.Introducing the state variable function of GPS attitude determination algorithm in SAR satellite by means of kinematic vector and describing the observation function by the GPS wide-band carrier phase,the paper uses the Kalman filter algorithm to obtian the attitude variables of SAR satellite.Compared the simulation results of Kalman filter algorithm with the least square algorithm and explicit solution,it is indicated that the Kalman filter algorithm is the best.     

星载大气痕量气体差分吸收光谱仪测试转台结构设计

在星载大气痕量气体差分吸收光谱仪的研制过程中,需要对其信噪比、光谱分辨率、光谱定标精度等性能指标进行测试,为此需要设计专用二维转台以实现不同视场在不同角度下的测试.根据光谱仪参数测试要求,提出转台设计方案,设计转台结构,建立三维模型,并对主要零部件进行选型.转台的方位轴±180°转动,满足114°的主视场测试要求;俯仰...