Probing the Effects of Reagent Gas Pressure and Ion Source Temperature for Dimethyl Ether Chemical Ionization of Tricyclic Antidepressants in an External Source Ion Trap Mass Spectrometer

This study examines the reagent gas pressure and ion source temperature dependence for dimethyl ether chemical ionization (DME CI) mass spectra recorded with an external source ion trap mass spectrometer (ITMS). Information for better controls of the reagent gas pressure in order to obtain fair CI spectra is provided. The origin of M^+? ions observed in DME CIMS is discussed in detail. Furthermore, the ion source temperature effect on the DME CI is also investigated.     

Determination of aluminum in highly concentrated iron samples: Study of interferences using high-resolution continuum source atomic absorption spectrometry

High-resolution continuum source atomic absorption spectrometry (HR-CS AAS) has been used to investigate spectral and non-spectral interferences found with a conventional line source atomic absorption spectrometer in the determination of aluminum in pharmaceutical products containing elevated iron and sugar concentrations. A transversely heated graphite furnace was used as the atomizer in both spectrometers. The two most sensitive aluminum lines at 309.3 nm and 396.2 nm were investigated and it was found that an iron absorption line at 309.278 nm, in the vicinity of the aluminum line at 309.271 nm, could be responsible for some spectral interference. The simultaneous presence of iron and the organic components of the matrix were responsible for radiation scattering, causing high continuous and also structured background absorption at both wavelengths. The aluminum and iron absorption could not be separated in time, i.e., the iron interference could not be eliminated by optimizing the graphite furnace temperature program. However, an interference-free determination of aluminum was possible carrying out the measurements with HR-CS AAS at 396.152 nm after applying least squares background correction for the elimination of the structured background. Analytical working range and other figures of merit were determined and are presented for both wavelengths using peak volume registration (center pixel ± 1) and the center pixel only. Limits of detection and characteristic masses ranged from 1.1 to 2.5 pg and 13 to 43 pg, respectively. The method was used for the determination of the aluminum contamination in pharmaceutical formulations for iron deficiency treatment, which present iron concentrations from 10 to 50 g l^− 1. Spike recoveries from 89% to 105% show that the proposed method can be satisfactorily used for the quality control of these formulations.     

Assessment of various carbon sources and nutrient feeding strategies for Panax ginseng cell culture

Ginseng (root of Panax ginseng C. A. Meyer) cells were cultivated on medium supplemented with various carbohydrates including sucrose, glucose, and fructose, at initial concentrations ranging from 10 to 110 g/L. Sucrose was shown to be the superior carbon source to the monosaccharides for ginseng cell growth and the optimal concentration was between 30 and 50 g/L. An increase in the initial concentration within this range increased the maximum cell density and growth index significantly, whereas much higher concentrations inhibited cell growth. Feeding of sucrose and some other medium components during the growth (fed-batch mode) was more effective in enhancing the cell growth and biomass productivity, increasing the growth index by more than 60–70% and biomass productivity by more than 50%.     

Pd-catalyzed reduction of aryl halides using dimethylformamide as the hydride source

The Pd-catalyzed homocoupling of aryl halides in a basic DMF solution is often accompanied by the dehalogenation of the substrate as side reaction. When an inorganic base such as sodium bicarbonate is used, the reducing role of the solvent has been demonstrated using DMF-d₇ and GC/MS analysis.     

A study for quality evaluation of Taxilli Herba from different hosts based on fingerprint-activity relationship modeling and multivariate statistical analysis

In this study, a fingerprint-activity relationship modeling between chemical fingerprints and antirheumatic activity was established, and multivariate statistical analysis was used to evaluate the quality of Taxilli Herba (TH) from different hosts. Characteristic fingerprints of 20 batches of TH samples were generated by high-performance liquid chromatography coupled with triple quadrupole-time of flight tandem mass spectrometry (HPLC-Triple TOF-MS/MS), and the similarity analysis was calculated based on thirteen common characteristic peaks by hierarchical clustering analysis (HCA). Subsequently, nine efficacy markers were discovered by combining fingerprints and antirheumatic activity through grey correlation analysis (GCA) and bivariate correlation analysis (BCA). Meanwhile, the content of 5 constituents in 9 markers was determined by high-performance liquid chromatography coupled with triple quadrupole-linear ion trap tandem mass spectrometry (HPLC-QTRAP-MS/MS). The comprehensive quality of TH was assessed using multivariate statistical analysis, including principal components analysis (PCA) and technique for order preference by similarity to ideal solution (TOPSIS). The results showed that a high dose of TH extract could markedly ameliorate arthritis damage compared to other doses, with flavonoids playing an important role in the antirheumatic activity. The comprehensive quality of samples from Morus alba L. (SS) was superior to those from Liquidambar formosana Hance (FXS). The present study will demonstrate the markers associated with efficacy, and provide an applicable strategy for more comprehensive quality control and evaluation of TH.     

ORGANIC GEOCHEMISTRY OF ARTIFICIALLY HEATED SPHAGNUM COAL CONSIDERED AS POSSIBLE SOURCE ROCK FOR OIL AND GAS

A preliminary study of simulated thermal maturity has been conducted to evaluate the oil, gas and hydrocarbon generation potential of sphagnum coal in the Jinsuo brown coal basin, Yunnan Province and to understand the characteristics of the element composition and biomarkers in the course of thermal alteration. The experimental result was compared with that of xylitic coal, a kind of lithotype of soft brown coal. It is considered that sphagnum coal possesses the potential of forming economic accumulation of oil and gas. Its highest proportion of oil and hydrocarbon generation is 510 mg/g Corg. and 232.1 mg/g Corg. respectively. At an R_(ran)~° value of 2.51%, the ratio of gas generation from sphagnum coal attains to 620.5 ml/g Corg. In view of sphagnum coal being different from the conventional soft brown coal in various respects such as coal forming raw materials and enviroments as well as physico-chemical properties, it is Suggested as a special kind of source rock for coal-generated oil and gas.     

Mercury Speciation in Fish by High-Performance Liquid Chromatography (HPLC) and Post-Column Ultraviolet (UV)-Photochemical Vapor Generation (PVG): Comparison of Conventional Line-Source and High-Resolution Continuum Source (HR-CS) Atomic Absorption Spectrometry (AAS)

An ultraviolet-photochemical generator (UV-PVG) capable of post-column on-line transformation of both organic and inorganic mercury species to cold vapor (Hg⁰) with subsequent detection by quartz tube-atomic absorption spectrometry (QT-AAS) was developed. Mercury(II), methylmercury(I), ethylmercury(I), and phenylmercury(I) were successfully detected after separation by reversed-phase high-performance liquid chromatography (RP-HPLC). Two types of AAS detectors were compared. The first was a commonly used line-source instrument while the second was a high-resolution continuum source (HR-CS) AAS. The latter provided better limits of detection: 0.47?µg?L^?1 for Hg(II), 0.84?µg?L^?1 for methylmercury(I), 0.80?µg?L^?1 for ethylmercury(I), and 2.0?µg?L^?1 for phenylmercury(I). The repeatability at 30?μg?L^?1 was 3.6%, 4.1%, 6.2%, and 4.5% for these species (n?=?10). These figures of merit were comparable with those reported for more sensitive atomic fluorescence spectrometry. Nine sample extraction procedures were investigated. Extraction by tetramethylammonium hydroxide and HCl at 75?°C was selected as the only method compatible with the proposed separation and detection steps providing high extraction efficiency and no changes in mercury speciation. The applicability of the proposed high-performance liquid chromatography–ultraviolet-photochemical vapor generation–quartz tube-atomic absorption spectrometry method was demonstrated using fish samples and certified reference materials (CRM) DOLT-4 (dogfish liver) and ERM-CE464 (tuna fish). The results were comparable to those obtained by a reference method based on L-cysteine extraction and high-performance liquid chromatography–inductively coupled plasma-mass spectrometry (HPLC–ICP-MS) determination.     

Monte Carlo simulation of spatial distribution of X rays in multifilm targets. III: optimum design as applied to W/Al‐film targets

The brightness of the X‐ray source in a W/Al‐film target used for X‐ray projection microscopy was studied by an approach using the Monte Carlo simulation. Since continuous X rays generated in a thin film have a specific angular distribution of emission, the brightness of the continuous X‐ray source cannot simply be estimated on the assumption that the angular distribution is homogeneous. The newly developed approach using the Monte Carlo simulation enables the evaluation of the effective source size, angular distribution, and brightness of a continuous X‐ray source with sufficient accuracy that it leads to the optimum design of a high‐brightness X‐ray source for uses such as X‐ray projection microscopy. The Monte Carlo calculations were performed for W(Δz)/Al (200 µm)‐film targets with different thicknesses of W film, Δz, under bombardment of 60 kV electrons. The results have suggested an optimum design consisting of a W (2 µm)/Al (200 µm)‐film target as most promising for providing an X‐ray source of higher brightness than the W (5 µm)/Al (200 µm)‐film target, which has already been in practice for X‐ray projection microscopy. Copyright © 2006 John Wiley & Sons, Ltd.     

Molecular structure and spectral properties of thionaphthalimides

The molecular structure and absorption spectra of monothio- and dithio-naphthalimides were compared to their naphthalimide analogues using AM1, PM3 and ZINDO/S semiempirical quantum chemical methods. The substitution of the 4R-naphthalimide oxygen atoms by sulphur atoms resulted in a red-shift of the absorption spectra by Δλ_max60-65 and 100-140 nm, respectively. The thionated naphthalimide derivatives do not show observable fluorescence due to intersystem crossing to the triplet source" title="View the MathML source" src="http://ars.els-cdn.com/content/image/1-s2.0-S0022286003003181-si8.gif">-states localised at the CS groups. The source" title="View the MathML source" src="http://ars.els-cdn.com/content/image/1-s2.0-S0022286003003181-si9.gif">-absorption bands of monothioimides are located at 525-580 nm (ε=60-80) and those for dithioimides at 535-560 nm (ε=140-390) and 628-686 nm (ε=34-68). None of these transitions are solvent sensitive. The source" title="View the MathML source" src="http://ars.els-cdn.com/content/image/1-s2.0-S0022286003003181-si10.gif">-transitions of N-phenylthioimides have also a small contribution from source" title="View the MathML source" src="http://ars.els-cdn.com/content/image/1-s2.0-S0022286003003181-si11.gif">-states due to a partial conjugation between CS group and π-electronic system of the N-phenyl ring. As a result, the source" title="View the MathML source" src="http://ars.els-cdn.com/content/image/1-s2.0-S0022286003003181-si12.gif"> bands of aromatic substituted N-phenylthioimides are red-shifted as compared to those of the aliphatic N-methyl-thioimides.     

基于微分干涉仪的新型光纤声传感器

基于微分干涉仪原理，建立了一套新型光纤声传感器系统。对该系统进行了理论分析，建立了系统的数学模型，推导并分析了干涉仪的输出信号，并以宽频信号做声源进行了实验研究。实验结果与理论分析相吻合，解决了目前双干涉仪线性范围窄的问题，简化了信号处理电路，可使用低相干光源，并且系统不受外界缓变因素的影响，对宽频声源定位的误差小于1％。