四倍频Nd：YAG激光在高压氢气中的喇曼频移研究

利用Nd:YAG固体激光器四倍频输出(266nm)在高压H₂中的受激喇曼散射获得多波长的激光输出。当泵浦能量一定时,通过改变H₂压力得到了最佳的能量输出,299nm波长的激光能量为3mJ,341nm波长的激光能量输出为6.1mJ,398nm波长的激光能量输出为2.8mJ,239nm波长的激光能量输出为0.8mJ,同时在477nm,595nm,218nm,200nm波段也有能量输出。     

用于泵浦固体激光器的激光二极管线阵的输出特性

从实验上测量了激光二极管线阵的输出特性,研究了温度、电流对输出功率、光谱特性,以及偏振特性的影响,为设计全固态激光器提供有益的参考。     

DC-DC电荷泵的研究与设计

以Dickson电荷泵的基本原理为出发点，研究了一种将正电压输入转为负电压输出的开关电容电路。由于开关电容的充放电特点，为确定电容时间常数，采用非交叠时钟控制信号避免了由于时钟交叠而造成的当电容充电还未完成即对下一级电容进行放电的现象。同时，参考功率MOS-FET的电容模型通过增大驱动电路的电流减小了开关管的上升延时，提高了开关动作的速度，使转换效率得到明显提高。此电路结构简单，性能优良，易于集成，可广泛应用于输出负电压的电源产品中。     

Crystalline structure of polyamide 12 as revealed by solid‐state 13C NMR and synchrotron WAXS and SAXS

The crystalline structure of polyamide‐12 (PA12) was studied by solid‐state ¹³C nuclear magnetic resonance (NMR) as well as by synchrotron wide‐ and small‐angle X‐ray scattering (WAXS and SAXS). Isotropic and oriented PA12 showed different NMR spectra ascribed to γ‐ and γ′‐crystalline modifications, respectively. On the basis of the position of the first diffraction peak, the isotropic γ‐form and the oriented γ′‐form were shown to be with hexagonal crystalline lattice at room temperature. When heated, the two PA12 polymorphs demonstrated different behaviors. Above 140 °C, the isotropic γ‐PA12 partially transformed into α‐modification. No such transition was observed with the oriented γ′‐PA12 phase even after annealing at temperatures close to melting. A γ′–γ transition was observed here only after isotropization by melting point. Various structural parameters were extracted from the WAXS and SAXS patterns and analyzed as a function of temperature and orientation: the degree of crystallinity, the d‐spacings, the Bragg's long spacings, the average thicknesses of the crystalline (l_c) and amorphous (l_a) phases, and the linear crystallinity x_cl within the lamellar stacks. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 3720–3733, 2005     

Very Long SiC‐Based Coaxial Nanocables with Tunable Chemical Composition

We present a simple process for the fabrication of very long SiC‐based coaxial nanocables (NCs). The versatility of this technique is confirmed by the ability to change the chemical composition of the NC outer layers from silica to carbon and boron nitride. The NCs consist of a SiC core approximately 30 nm in diameter with lengths up to several hundred of nanometers. The thickness of the coating is in the range 2–10 nm. The morphology and structural characterization of the NCs is investigated by scanning electron microscopy (SEM) and high‐resolution transmission electron microscopy (HRTEM), respectively, and their chemical composition is probed by electron energy loss spectroscopy (EELS). A vapor–solid growth mechanism is proposed to explain the growth of SiC‐based NCs of various chemical compositions, depending on the chemical nature of the vapor phase. Because of the large quantity of very long and interlaced NCs produced during the synthesis, the macroscopic aspect of the as‐grown material is like a self‐supported felt.     

Photonic crystals--a step towards integrated circuits for photonics.

The field of photonic crystals has, over the past few years, received dramatically increased attention. Photonic crystals are artificially engineered structures that exhibit a periodic variation in one, two, or three dimensions of the dielectric constant, with a period of the order of the pertinent light wavelength. Such structures in three dimensions should exhibit properties similar to solid-state electronic crystals, such as bandgaps, in other words wavelength regions where light cannot propagate in any direction. By introducing defects into the periodic arrangement, the photonic crystals exhibit properties analogous to those of solid-state crystals. The basic feature of a photonic bandgap was indeed experimentally demonstrated in the beginning of the 1990s, and sparked a large interest in, and in many ways revitalized, photonics research. There are several reasons for this attention. One is that photonic crystals, in their own right, offer a proliferation of challenging research tasks, involving a multitude of disciplines, such as electromagnetic theory, nanofabrication, semi-conductor technology, materials science, biotechnology, to name a few. Another reason is given by the somewhat more down-to-earth expectations that photonics crystals will create unique opportunities for novel devices and applications, and contribute to solving some of the issues that have plagued photonics such as large physical sizes, comparatively low functionality, and high costs. Herein, we will treat some basics of photonic crystal structures and discuss the state-of-the-art in fabrication as well give some examples of devices with unique properties, due to the use of photonic crystals. We will also point out some of the problems that still remain to be solved, and give a view on where photonic crystals currently stand.     

Solid state NMR characterization of formation of poly(ϵ‐caprolactone)/maghnite nanocomposites by in situ polymerization

Results of multinuclear MAS NMR spectroscopy are reported for poly (ε‐caprolactone)/maghnite nanocomposite formation, with ε‐caprolactone in situ polymerized in the presence of maghnite, a proton exchanged montmorillonite clay. Exfoliated and intercalated materials with different maghnite loading in the range 3–15 wt % were investigated. ¹H NMR evidences Brønsted acid hydroxyl groups in the silicate layers and shows that their broad signal at 7.6 ppm present in the parent clay disappears in the nanocomposite material. ²⁷Al MAS NMR results show that beside the hexacoordinated aluminum signal, two additional peaks corresponding to two different tetrahedral Al sites are present in the clay framework. The NMR signal intensity of only one of them was found to be affected in the nanocomposites compared with the parent maghnite, suggesting that these specific aluminum sites are the reactive ones at the initial stages of the polymerization. However almost no changes occurred in the ²⁹Si NMR spectra, confirming that the polymer grafting, as indicated earlier by atomic force microscopy, took place on the aluminum tetracoordinated sites rather than on the silicon sites. A mechanism of maghnite surface catalyzed polymerization of ε‐caprolactone was proposed, involving Brønsted and Lewis acid sites. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 3060–3068, 2007     

Sn/Ge(1 1 1) α-phase: characterization of image resonances by specular electron reflection and selective electron scattering

Image potential resonances on the Sn/Ge(1 1 1) α-phase are investigated by two closely related methods: specular electron reflection and so-called selective electron scattering. Electrons from image resonances are detected on this surface at 120 and 300 K, i.e. below and above the phase transition at about 200 K. The dispersion of the image resonances reveals at these two temperatures equivalent effective electron masses, which are characteristic for this type of electronic surface states. The results of the two methods are consistent according to the similarity of the scattering processes. Changes in the loss peak intensity with the annealing temperature are assigned to the surface quality and are reflected by characteristic photoemission intensities.     

应用无衍射贝塞尔光束的固体线膨胀系数测量系统

测量固体线膨胀系数是工程设计中的一项重要工作。这套非接触固体线膨胀系数测量系统利用激光三角法进行了设计。通过采用线阵CCD作为信号传感器来实现自动化测量。通过采用无衍射贝塞尔光束来提高测量精度和增大测量范围。