SO_4~(2-)/TiO_2催化合成乙酸戊酯

以Ti(OBu)4为原料,采用溶胶-凝胶法制备了固体超强酸SO24-/TiO2,其结构经XRD,DRS及IR表征。以SO24-/TiO2为催化剂,通过乙酸与戊醇反应合成了乙酸戊酯。讨论了影响酯化率的主要因素。实验结果表明,当催化剂用量为0.6 g,乙酸87.3 mmol,醇酸摩尔比为1.4∶1.0,于115℃反应6 h时,平行实验的平均酯化率可达94.2%。     

固体超强酸SO_4~(2-)/SnO_2-Al_2O_3的红外光谱研究

以四氯化锡、硫酸铝为原料,氨水为沉淀剂,采用共沉淀法制得新型固体超强酸SO42-/SnO2-A l2O3。采用FT-IR技术考察了金属元素摩尔比、焙烧温度、浸渍液以及掺杂稀土氧化物对该固体超强酸结构和性能的影响。FT-IR结果表明在该固体超强酸中,锡和硫酸根是以螯合和桥式两种方式配位结合,其中起催化活化作用的主要是和硫酸根以螯合双齿结合的锡;和SO42-/ZrO2型超强酸相比,SO42-/SnO2-A l2O3超强酸的硫酸根FT-IR特征吸收峰发生蓝移,显示出更强的酸性。锡铝摩尔比为9∶1、焙烧温度为773K、焙烧时间为3h时,制得的SO42-/SnO2-A l2O3样品对酯化反应的催化性能最好。     

稀土固体超强酸SO_4~(2-)/TiO_2-La~(3+)催化硝化甲苯的研究

研究了以固体超强酸SO24-/TiO2-La3+作为催化剂,浓硝酸和甲苯为原料合成硝基甲苯,并考察了影响反应的因素。结果表明,催化剂用浓度为1.0 mol.L-1硫酸浸泡3小时,反应催化剂用量为硝酸质量的10%,反应时间为3小时,反应温度为55℃是最适宜的反应条件,甲苯转化率达90.14%,邻对比达0.89。     

连续流动-分光光度法测定固体废物中氰化物浸出毒性的研究

建立了一种利用连续流动-分光光度法测定固废中氰化物的浸出毒性的方法,当氰化物浓度在0~200μg/L范围内,校准曲线的相关系数r为0.9998;方法的检出限可以达到0.33μg/L;不同浓度样品测定的相对标准偏差低于2.6%,实际固体废物样品加标回收率为96%~103%,方法精密度良好并且准确度较高;通过实际样品测定结果比对,证明方法与传统国家标准方法测定结果有着较高的吻合度,具有良好的应用前景。     

Phosphonate‐Modified UiO‐66 Brønsted Acid Catalyst and Its Use in Dehydra‐Decyclization of 2‐Methyltetrahydrofuran to Pentadienes

Phosphorus‐modified all‐silica zeolites exhibit activity and selectivity in certain Brønsted acid catalyzed reactions for biomass conversion. In an effort to achieve similar performance with catalysts having well‐defined sites, we report the incorporation of Brønsted acidity to metal–organic frameworks with the UiO‐66 topology, achieved by attaching phosphonic acid to the 1,4‐benzenedicarboxylate ligand and using it to form UiO‐66‐PO₃H₂ by post‐synthesis modification. Characterization reveals that UiO‐66‐PO₃H₂ retains stability similar to UiO‐66, and exhibits weak Brønsted acidity, as demonstrated by titrations, alcohol dehydration, and dehydra‐decyclization of 2‐methyltetrahydrofuran (2‐MTHF). For the later reaction, the reported catalyst exhibits site‐time yields and selectivity approaching that of phosphoric acid on all‐silica zeolites. Using solid‐state NMR and deprotonation energy calculations, the chemical environments of P and the corresponding acidities are determined.     

Evaluation,Pitfalls and Recommendations for the “Water Layer Test” for Solid Contact Ion‐selective Electrodes

The “water layer test” is a crucial validation step of solid‐contact ion‐selective electrodes. It can confirm or contest the claim that the tested electrode is indeed a genuine solid contact electrode without an aqueous film between the ion‐selective membrane and its solid contact. Information about the presence of a water layer is essential for the interpretation of drifts in the electrode potentials commonly experienced with solid contact electrodes. Since its publication, the water layer test has been ubiquitously used, but without a standardized protocol the interpretation (or misinterpretation) of the test results led to uncertainties in the conclusions. Through both experiments and simulations based on theoretical models we have investigated the experimental parameters that can influence the results of the water layer test. We propose guidelines to minimize the possibility of misinterpretation of the results of the water layer test by considering the key factors that affect the shape of transients recorded during the water layer test. Most importantly, we emphasize the importance of allowing sufficient time for conditioning the tested electrode before the water layer test and providing adequate time for equilibration during the experiment. Using a thin ion‐selective membrane and thin solid‐contact layer for the tests is also recommended.     

Equipping Natural Killer Cells with Specific Targeting and Checkpoint Blocking Aptamers for Enhanced Adoptive Immunotherapy in Solid Tumors

Herein, we propose an aptamer‐equipping strategy to generate specific, universal and permeable (SUPER) NK cells for enhanced immunotherapy in solid tumors. NK cells were chemically equipped with TLS11a aptamer targeting HepG2 cells and PDL1‐specific aptamer without genetic alteration. The dual aptamer‐equipped NK cells exhibited high specificity to tumor cells, resulting in higher cytokine secretion and apoptosis/necrosis compared to parental or single aptamer‐equipped NK cells. Interestingly, dual aptamer‐equipped NK cells induced remarkable upregulation of PDL1 expression in HepG2 cells, enhancing checkpoint blockade. Furthermore, in vivo intravital imaging demonstrated high infiltration of aptamer‐equipped NK cells into deep tumor region, leading to enhanced therapeutic efficacy in solid tumors. This work offers a straightforward chemical strategy to equip NK cells with aptamers, holding considerable potential for enhanced adoptive immunotherapy in solid tumors.     

Cycling a Lithium Metal Anode at 90 °C in a Liquid Electrolyte

Stable operation at elevated temperature is necessary for lithium metal anode. However, Li metal anode generally has poor performance and safety concerns at high temperature (>55 °C) owing to the thermal instability of the electrolyte and solid electrolyte interphase in a routine liquid electrolyte. Herein a Li metal anode working at an elevated temperature (90 °C) is demonstrated in a thermotolerant electrolyte. In a Li|LiFePO₄ battery working at 90 °C, the anode undergoes 100 cycles compared with 10 cycles in a practical carbonate electrolyte. During the formation of the solid electrolyte interphase, independent and incomplete decomposition of Li salts and solvents aggravate. Some unstable intermediates emerge at 90 °C, degenerating the uniformity of Li deposition. This work not only demonstrates a working Li metal anode at 90 °C, but also provides fundamental understanding of solid electrolyte interphase and Li deposition at elevated temperature for rechargeable batteries.     

Determining multi‐pesticide residues in teas by dispersive solid‐phase extraction combined with speed‐regulated directly suspended droplet microextraction followed by gas chromatography–tandem mass spectrometry

In this study, an effective speed‐regulated directly suspended droplet microextraction method was developed to condense pesticide residues from teas through dispersive solid‐phase extraction prior to analysis by gas chromatography with tandem mass spectrometry. The extractant was intentionally dispersed into the sample solution in the form of globules through high‐speed agitation. This procedure increases the contact area between the binary phases and shortens the distribution equilibrium time. The fine globules reassembled by decelerating stirring speed, the extractant could be taken out for gas chromatography with tandem mass spectrometry. Recovery studies were performed under optimized extraction conditions by using matrix blanks fortified with pesticides at three concentrations (10, 50, and 100 µg/kg). Over 87% of the recoveries for the analytes in four tea matrices were acceptable given their recovery ranges of 70–120% and relative standard deviations of ≤20%. The limits of quantification of most pesticides were lower than 10 µg/kg and thus satisfied the requirements for maximum residue levels prescribed by the European Community. A total of 38 tea samples from local markets were analyzed by using the proposed method. Results showed that chlorpyrifos was the most frequently detected pesticide in teas. The method is a potential choice for the routine monitoring of pesticide residues in complex matrices.