Effect of BaBiO3 and Ba0.6K0.4BiO3 additives on the rechargeability of manganese oxide cathodes in alkaline cells

The effect of the incorporation of small amounts (1–5 wt%) of semiconducting BaBiO₃ and metallic Ba_0.6K_0.4BiO₃ additives on the rechargeability of electrolytic manganese dioxide (EMD) cathodes in alkaline cells in the one-electron regime has been investigated. Both the BaBiO₃ and Ba_0.6K_0.4BiO₃ additives lead to better cyclability compared to the previously known binary oxide additive Bi₂O₃. X-ray diffraction patterns recorded before and after 30 cycles as well as cyclic voltammograms recorded after first and 30 cycles reveal that the better cyclability in the presence of BaBiO₃ and Ba_0.6K_0.4BiO₃ additives is due to the suppression of the formation of unwanted, electrochemically inactive birnessite and hausmannite phases and a shifting of the second-electron capacity of Mn to higher potentials.     

Electrochemical reaction of lithium with nanosized vanadium antimonate

Nanometric vanadium antimonate, VSbO₄, was prepared by mechanical milling from Sb₂O₃ and V₂O₅ and characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), Mossbaüer spectroscopy (MS) and X-ray photoelectron spectroscopy (XPS) techniques. Its reactivity towards lithium was examined by testing Li/VSbO₄ cells under galvanostatic and potentiostatic regimes. The amount of Li inserted was found to be consistent with a two-step process involving the reactions (i) VSbO₄+8 Li→Sb+V+4 Li₂O and (ii) Sb+3 Li→Li₃Sb, the former being virtually irreversible and the latter reversible as suggested by the shape of the anodic and cathodic curves. Ex situ XPS measurements of the discharged and charged electrode provided direct evidence of the formation of alloyed Sb and confirmed the results of the potentiostatic curves regarding the irreversible or reversible character of the previous reactions. The Li/VSbO₄ cell exhibited acceptable electrochemical performance, which surpassed that of other Sb-based compounds as the likely result of the formation of V and its associated enhanced electrode conductivity.     

Structure and Electrochemical Behavior of Lithium-Manganese Spinels Doped with Chromium and Nickel

A series of compounds with the general formula LiMn_{2 - x - y} Cr _x Ni _y O₄, where x + y = 0.05, 0.5, or 1.0, is synthesized. It is shown that all these compounds are pure-phase spinels with parameter aequal to 0.8193-0.8236 nm. Doping a stoichiometric lithium-manganese spinel simultaneously with chromium and nickel makes the spinel structure stable. The initial specific capacity of a spinel depends on its doping degree. Doping LiMn₂O₄ with chromium and nickel simultaneously at an Mn : Cr : Ni ratio of 195 : 3 : 2 raises the spinel's specific capacity and reduces the cycling degradation. The change in the discharge capacity of LiMn_1.95Cr_0.03Ni_0.02O₄ electrodes cycled at 20, 0, and -14°C is determined.     

Comparison between potentiostatic and galvanostatic intermittent titration techniques for determination of chemical diffusion coefficients in ion-insertion electrodes

Using well-cycled, thin composite graphite electrodes we analyze carefully the limitations of potentiostatic and galvanostatic intermittent titration techniques (PITT and GITT, respectively) for determination of the differential (incremental) intercalation capacitance, C_dif, and the chemical diffusion coefficient, D, of Li ions in these ion-insertion electrodes (IIEs). We demonstrate the superiority of the GITT over PITT to determine these quantities as the former technique allows for a more accurate determination of C_dif and hence D which closely approach to the spinodal domain related to the first-order phase transition during ion-insertion. We show that GITT is also more effective in eliminating the parasitic contributions of background currents to the total measured response. A pronounced difference in the initial, intrinsic kinetics of formation of a new phase in the bulk of the old one has been observed depending on the direction of titration (phases less saturated with Li are formed faster during deintercalation than the Li-rich phases in the course of intercalation).     

Fluorine-doped nanocrystalline SnO2 powders prepared via a single molecular precursor method as anode materials for Li-ion batteries

Fluorine-doped nanocrystalline tin dioxide materials (F:SnO₂) have been successfully prepared by the sol-gel process from a single molecular precursor followed by a thermal treatment at 450-650 °C. The resulting materials were characterized by FTIR spectroscopy, powder X-ray diffraction, nitrogen adsorption porosimetry (BET) and transmission electron microscopy (TEM). The mean particle size increased from 5 to 20 nm and the specific surface area decreased from 123 to 37 m²/g as the temperature of heat treatment was risen from 450 to 650 °C. Fluorine-doped nanocrystalline SnO₂ exhibited capacity of 560, 502, and 702 mA h/g with 48%, 50%, and 40% capacity retention after 25 cycles between 1.2 V and 50 mV at the rate of 25 mA/g, respectively. In comparison, commercial SnO₂ showed an initial capacity of 388 mA h/g, with only 23% capacity retention after 25 cycles.     

Novel composite anode materials for lithium ion batteries with low sensitivity towards humidity

Graphitic anode materials for lithium ion batteries processed under high humidity conditions show severe performance losses. The sensitivity of these materials towards humidity can be significantly reduced by adsorbing metal ions like silver or copper ions, with subsequent heat treatment of these composites. Results of X-ray photoelectron spectroscopy, high-resolution electron microscopy, thermogravimetry, and differential thermal analysis indicate that the deposited metals exist in metallic and carbide, M_xC (M=Cu or Ag), forms. They remove or cover (i.e. deactivate) active hydrophilic sites at the surface of the graphite. These composites absorb less water during processing. The electrochemical performance, including reversible capacity, coulombic efficiency in the first cycle, and cycling behavior, is markedly improved. This approach provides a potentially powerful method to manufacture lithium ion batteries under less demanding conditions.Presented at the 3rd International Meeting on Advanced Batteries and Accumulators, 16–20 June 2002, Brno, Czech Republic     

Novel Gel—like Process for Synthesizing Submicron LiaNi0.8Co0.2O2 Powders Used in Lithium Ion Batteries

A novel gel-like process has been developed for synthesizing LiaNi0.8Co0.2O2 powders,using citric acid as a chelating agent. This process improves the homogeneity of constituent cation and enhances their reactivity in the obtained precursor. The results of electrochemical test demonstrated that these materials exhibited excellent electrochemical properties. Its initial capacity reached 181.6 mAh/g and reversible efficiency at the first cycle is about 88.6%.     

Molten salt synthesis (MSS) of Cu2Mo6S8—New way for large-scale production of Chevrel phases

The Chevrel phase (CP), Mo₆S₈, was found to be an excellent cathode material for rechargeable magnesium batteries. Mo₆S₈ is obtained by a leaching process of Cu₂Mo₆S₈, which removes the copper. A new method of Cu₂Mo₆S₈ production was developed. In contrast to the well-known solid-state synthesis of CP, the method is based on the reaction in a molten salt media (KCl). A fast kinetics of this reaction allows using less active, but more convenient precursors (sulfides instead of sulfur), decreasing temperature and synthesis duration, as well as operation in the inert atmosphere instead of dynamic evacuated systems. It was shown that the composition and the electrochemical behavior of the products obtained by MSS and by the solid-state synthesis are identical. Thus, the molten salt method is extremely attractive for the large-scale production of the active materials for Mg batteries.     

Engineering Transition Metal Layers for Long Lasting Anionic Redox in Layered Sodium Manganese Oxide

Oxygen-redox-based-layered cathode materials are of great importance in realizing high-energy-density sodium-ion batteries (SIBs) that can satisfy the demands of next-generation energy storage technologies. However, Mn-based-layered materials (P2-type Na-poor Na_y[A_xMn_1−x]O₂, where A = alkali ions) still suffer from poor reversibility during oxygen-redox reactions and low conductivity. In this work, the dual Li and Co replacement is investigated in P2-type-layered Na_xMnO₂. Experimentally and theoretically, it is demonstrated that the efficacy of the dual Li and Co replacement in Na_0.6[Li_0.15Co_0.15Mn_0.7]O₂ is that it improves the structural and cycling stability despite the reversible Li migration from the transition metal layer during de-/sodiation. Operando X-ray diffraction and ex situ neutron diffraction analysis prove that the material maintains a P2-type structure during the entire range of Na⁺ extraction and insertion with a small volume change of ≈4.3%. In Na_0.6[Li_0.15Co_0.15Mn_0.7]O₂, the reversible electrochemical activity of Co³⁺/Co⁴⁺, Mn³⁺/Mn⁴⁺, and O^2-/(O₂)^n- redox is identified as a reliable mechanism for the remarkable stable electrochemical performance. From a broader perspective, this study highlights a possible design roadmap for developing cathode materials with optimized cationic and anionic activities and excellent structural stabilities for SIBs.     

Progress of Phosphate-based Polyanion Cathodes for Aqueous Rechargeable Zinc Batteries

Aqueous rechargeable zinc batteries (ARZBs) are recently prevailing devices that utilize the abundant Zn resources and the merits of aqueous electrolytes to become a competitive alternative for large-scale energy storage. Benefiting from the unique inductive effect and flexible structure, the past five years have experienced a diversiform of phosphate-based polyanion materials that are used as cathodes in ARZBs. In this review, the most recent advances in the Zn²⁺ storage mechanisms and electrolyte optimization of the phosphate-based cathodes of ARZBs, which mainly focus on vanadium/iron-based phosphates and their derivatives are presented. Furthermore, in addition to significant progress on polyanion phosphate-based cathode materials, the design strategies both for electrode materials and compatible electrolytes are also elaborated to improve the energy density and extend the cycling life of aqueous Zn/polyanion batteries.