红外热图技术在气功研究中的应用

本文用红外技术研究发功时上肢体表温度变化的特点和它的规律。     

Numerical investigation of a coupled moving boundary model of radial flow in low-permeable stress-sensitive reservoir with threshold pressure gradient

The threshold pressure gradient and formation stress-sensitive effect as the two prominent physical phenomena in the development of a low-permeable reservoir are both considered here for building a new coupled moving boundary model of radial flow in porous medium. Moreover, the wellbore storage and skin effect are both incorporated into the inner boundary conditions in the model. It is known that the new coupled moving boundary model has strong nonlinearity. A coordinate transformation based fully implicit finite difference method is adopted to obtain its numerical solutions. The involved coordinate transformation can equivalently transform the dynamic flow region for the moving boundary model into a fixed region as a unit circle, which is very convenient for the model computation by the finite difference method on fixed spatial grids. By comparing the numerical solution obtained from other different numerical method in the existing literature, its validity can be verified. Eventually, the effects of permeability modulus, threshold pressure gradient, wellbore storage coefficient, and skin factor on the transient wellbore pressure, the derivative, and the formation pressure distribution are analyzed respectively.     

Non-Hermitian Weyl semimetals: Non-Hermitian skin effect and non-Bloch bulk-boundary correspondence

We investigate novel features of three-dimensional non-Hermitian Weyl semimetals,paying special attention to the unconventional bulk-boundary correspondence.We use the non-Bloch Chern numbers as the tool to obtain the topological phase diagram,which is also confirmed by the energy spectra from our numerical results.It is shown that,in sharp contrast to Hermitian systems,the conventional(Bloch)bulk-boundary correspondence breaks down in non-Hermitian topological semimetals,which is caused by the non-Hermitian skin effect.We establish the non-Bloch bulk-boundary correspondence for non-Hermitian Weyl semimetals:the topological edge modes are determined by the non-Bloch Chern number of the bulk bands.Moreover,these topological edge modes can manifest as the unidirectional edge motion,and their signatures are consistent with the non-Bloch bulk-boundary correspondence.Our work establishes the non-Bloch bulk-boundary correspondence for non-Hermitian topological semimetals.     

复合结构丝中的电流密度分布和巨磁阻抗效应

提出了由中间为高电导率的非铁磁性金属丝外面包裹一层铁磁材料组成的复合结构丝的电流 密度分布和巨磁阻抗(GMI)效应模型，并对Cu/FeCoNi复合丝进行了数值模拟. 结果表明：在 相同的磁性材料几何尺寸和磁特性时，Cu/FeCoNi复合丝铁磁层内的电流随频率的升高比匀 质FeCoNi铁磁丝内的电流更趋于表面分布，而且开始出现趋肤效应时对应的频率明显降低. 当在比较低的频率下就可以观察到明显的MI变化时，复合结构丝中的电阻和电抗变化主要是 由趋肤效应引起，趋肤效应仍然是引起复合结构材料(包括多层薄膜结构) 关键词： 电流密度 巨磁阻抗效应 趋肤效应     

Recent progress and new challenges in isospin physics with heavy-ion reactions

The ultimate goal of studying isospin physics via heavy-ion reactions with neutron-rich, stable and/or radioactive nuclei is to explore the isospin dependence of in-medium nuclear effective interactions and the equation of state of neutron-rich nuclear matter, particularly the isospin-dependent term in the equation of state, i.e., the density dependence of the symmetry energy. Because of its great importance for understanding many phenomena in both nuclear physics and astrophysics, the study of the density dependence of the nuclear symmetry energy has been the main focus of the intermediate-energy heavy-ion physics community during the last decade, and significant progress has been achieved both experimentally and theoretically. In particular, a number of phenomena or observables have been identified as sensitive probes to the density dependence of nuclear symmetry energy. Experimental studies have confirmed some of these interesting isospin-dependent effects and allowed us to constrain relatively stringently the symmetry energy at sub-saturation densities. The impact of this constrained density dependence of the symmetry energy on the properties of neutron stars have also been studied, and they were found to be very useful for the astrophysical community. With new opportunities provided by the various radioactive beam facilities being constructed around the world, the study of isospin physics is expected to remain one of the forefront research areas in nuclear physics. In this report, we review the major progress achieved during the last decade in isospin physics with heavy ion reactions and discuss future challenges to the most important issues in this field.     

Flexible and Highly Sensitive Pressure Sensors Based on Bionic Hierarchical Structures

The rational design of high‐performance flexible pressure sensors attracts attention because of the potential applications in wearable electronics and human–machine interfacing. For practical applications, pressure sensors with high sensitivity and low detection limit are desired. Here, ta simple process to fabricate high‐performance pressure sensors based on biomimetic hierarchical structures and highly conductive active membranes is presented. Aligned carbon nanotubes/graphene (ACNT/G) is used as the active material and microstructured polydimethylsiloxane (m‐PDMS) molded from natural leaves is used as the flexible matrix. The highly conductive ACNT/G films with unique coalescent structures, which are directly grown using chemical vapor deposition, can be conformably coated on the m‐PDMS films with hierarchical protuberances. Flexible ACNT/G pressure sensors are then constructed by putting two ACNT/G/PDMS films face to face with the orientation of the ACNTs in the two films perpendicular to each other. Due to the unique hierarchical structures of both the ACNT/G and m‐PDMS films, the obtained pressure sensors demonstrate high sensitivity (19.8 kPa^?1, <0.3 kPa), low detection limit (0.6 Pa), fast response time (<16.7 ms), low operating voltage (0.03 V), and excellent stability for more than 35 000 loading–unloading cycles, thus promising potential applications in wearable electronics.     

Analysis of Mercury in Skin Lightening Cream by Microwave Plasma Atomic Emission Spectroscopy (MP-AES)

This research aimed at developing an analysis method, which was optimized and validated to determine the content of mercury in skin lightening cream discovered in the market in Bandar Lampung, Indonesia, through the use of microwave plasma atomic emission spectroscopy (MP-AES). The optimization on the analysis method was conducted on pump rate, viewing position, and reductant concentration in order to obtain the highest mercury emission intensity, while the solution stability was optimized to know the stability of mercury in the solution. The result showed that the method developed had precision with a relative standard deviation of 2.67%, recovery value of 92.78%, and linearity with an r value of 0.993, respectively. The sensitivity of the instrument detection had a limit of analysis method detection and quantification of 0.59 and 1.98 µg/L, respectively. The results of the test of the lightening cream (8 of 16 samples) positively contained mercury in the range of 422.61–44,960.79 ng/g. Therefore the method of analysis developed may be used for routine analysis of chemicals in any cosmetics products.     

Idealization of correlations between optimal simplified molecular input-line entry system-based descriptors and skin sensitization

The Index of Ideality of Correlation (IIC) is a new criterion of the predictive potential for quantitative structure–property/activity relationships. The value of the IIC is a mathematical function sensitive to the value of the correlation coefficient and dispersion (expressed via mean absolute error). The IIC has been applied to develop QSAR models for skin sensitization achieving good predictive potential. The ‘ideal correlation’ is based on elementary fragments of simplified molecular input-line entry system (SMILES) and on the taking into account of the total numbers of nitrogen, oxygen, sulphur and phosphorus in the molecule.     

碳纤维复合材料趋肤效应研究

良导体在平面电磁场作用下的趋肤效应有简单的公式描述,而涡流检测中电各向异性材料的趋肤效应却非常复杂。该文通过对碳纤维复合材料的涡流检测进行有限元仿真,研究涡流检测中电各向异性材料的趋肤效应。     

Jet impingement onto a tapered hole: Influence of jet velocity and hole wall velocities on heat transfer and skin friction

Jet impingement onto a hole with elevated wall temperature can be associated with the high‐temperature thermal drilling, where the gas jet is used for shielding the hole wall from the high‐temperature oxidation reactions as observed in the case of laser drilling. In laser processing, the molten flow from the hole wall occurs; and in the model study, the hole wall velocity resembling the molten flow should be accounted for. In the present study, gas jet impingement onto tapered hole with elevated temperature is considered and the heat transfer rates as well as skin friction at the hole wall surface are predicted. The velocity of molten flow from the hole wall determined from the previous study is adopted in the simulations and the effect of hole wall velocity on the heat transfer rates and skin friction is also examined. It is found that the Nusselt number and skin friction at the hole wall in the regions of hole inlet and exit attain high values. The influence of hole wall velocity on the Nusselt number and skin friction is found not to be very significant. Copyright © 2008 John Wiley & Sons, Ltd.