Carbon–epoxy composites based on fibers coated with nylon 6,6: hygrothermal ageing versus interlaminar shear strength

Carbon fibers were coated in situ with a thin film of polyhexamethylene adipamide by an interfacial polycondensation technique. The modified fibers were used for the preparation of epoxy-based unidirectional composites. Specimens of these materials were immersed in water until equilibrium conditions were attained. The weight gain at equilibrium was determined as a function of the immersion temperature, the fiber volume fraction and the polyamide content deposited on the fibers. Water penetration in specimens made with uncoated carbon fibers increases when the volume fraction decreases. Introduction of the polyamide interlayer initially increases the water absorption, but reduces it at higher immersion temperatures and/or higher polyamide contents. The treated specimens were subjected to the short beam test to determine the interlaminar shear strength (ILSS). The data show that the ILSS decreases with water penetration but increases when the immersion temperature increases from 40 to 70°C. The overall performance encountered is discussed in terms of the possible roles of the polyamide interphase while taking into account mechanisms concerned with matrix plasticization, interphase degradation and residual stress relaxation.     

YAG激光打标机光笔中会聚出纤光的光学系统

智能化大幅面激光打标机中的光笔,采用本文叙述的光学系统会聚多模石英光纤出射的大功率YAG激光,通常能以小于0.2mm的线宽长时间连续地在工件上刻划,仔细调焦后线宽达0.1mm;手持此光笔可进行人工刻写、画及焊接电子元件等.     

Light Scattering by Cylindrical Fibers with High Aspect Ratio Using the Null‐Field Method with Discrete Sources

The problem of computing light scattering by cylindrical fibers with high aspect ratio in the framework of the Null‐Field method with discrete sources is treated. Numerical experiments for investigating the scattering properties of two fiber geometries are performed using distributed spherical vector wave functions as discrete sources.     

Littman光栅外腔可调谐Yb3+双包层光纤激光器

本文对LD泵浦的光栅外腔可调谐双包层Yb3 光纤激光器进行了实验研究．采用Littman外腔结构，研究了Yb3 光纤激光器的调谐特性．输出激光调谐范围42nm，谱线宽度0．08nm，最大输出功率达到了460mW，斜率效率约30％．并对其输出光功率随波长的变化进行了观测和分析．     

高非线性光纤及其应用

介绍了各种高非线性光纤的原理，并对其在超连续（SC）脉冲的产生和波长变换上的应用作了讨论。     

ADSS光缆的力学计算

介绍了ADSS光缆的力学计算，给出了光缆弧垂、张力、应变和悬长等计算公式，并对普遍采用的“悬链线”和“抛物线”两种计算方法加以比较。     

光纤中的SBS反射率和波形研究

从理论和实验上研究了不同焦距下泵浦能量以及透镜与光纤间距对多模光纤中的SBS能量反射率和脉冲波形的影响。理论模拟采用一维瞬态SBS数值计算模型和边界噪声输入法，得到了SBS反射率和脉冲上升沿的变化规律。实验上采用1.06μm的YAG激光器和无掺杂多模阶跃石英光纤，测得了能量反射率和波形的变化规律，获得的最大反射率为69%，脉宽压缩比为3:1-2:1。计算结果与实验结果符合较好。     

光纤喇曼放大器的功率转换效率分析

在定义光纤喇曼放大器(FRA)功率转换效率(PCE)的基础上,考察了不同工作条件下光纤喇曼放大器的功率转换效率,分析PCE与光纤喇曼放大器的输入信号功率、输入泵浦功率和光纤长度的关系,比较了分布式与集总式FRA的功率转换效率,给出提高FRA功率转换效率的途径。     

一种基于小波变换的OTDR事件分析算法的研究

简单分析了用 OTDR卡进行光纤检测的原理 ,根据小波分析检测信号突变点的理论 ,提出了运用小波分析对光纤断点及反射事件准确定位的方法。理论分析和实例计算表明 ,这种方法对 OTDR曲线中反射事件尤其是断点的定位非常准确 ,是一种行之有效的方法