Voltammetric determination of L-dopa using an electrode modified with trinuclear ruthenium ammine complex (Ru-red) supported on Y-type zeolite

The L-dopa is the immediate precursor of the neurotransmitter dopamine. Unlike dopamine, L-dopa easily enters the central nervous system and is used in the treatment of Parkinson’s disease. A sensitive and selective method is presented for the voltammetric determination of L-dopa in pharmaceutical formulations using a carbon paste electrode modified with trinuclear ruthenium ammine complex [(NH₃)₅Ru^IIIORu^IV(NH₃)₄ORu^III(NH₃)₅]⁶⁺ (Ru-red) incorporated in NaY zeolite. The parameters which influence on the electrode response (paste composition, potential scan rate, pH and interference) were also investigated. The optimum conditions were found to an electrode composition (m/m) of 25% zeolite containing 6.7% Ru, 50% graphite and 25% mineral oil in acetate buffer at pH 4.8. Voltammetric peak currents showed a linear response for L-dopa concentration in the range between 1.2×10⁻⁴ and 1.0×10⁻² mol l⁻¹ (r=0.9988) with a detection limit of 8.5×10⁻⁵ mol l⁻¹. The variation coefficient for a 1.0×10⁻³ mol l⁻¹ L-dopa (n=10) was 5.5%. The results obtained for L-dopa in pharmaceutical formulations (tablet) was in agreement with compared official method. In conclusion, this study has illustrated that the proposed electrode modified with Ru-red incorporated zeolite is suitable valuable for selective measurements of L-dopa.     

Adsorptive Voltammetry of Polyelectrolyte Complex Between 11‐Ferrocenyltrimethylundecylammonium and Polyanions at Carbon Paste Electrode

For polyelectrolyte complex between cationic surfactant and polyanion, the adsorptive voltammetry at carbon paste electrode using an electroactive cationic surfactant was examined. The adsorption state of the cationic surfactant in the complexes at CPE was estimated from the half‐height width of the oxidation waves. The half‐height width for poly(styrene sulfonate) was independent of the molecular weight, and was same as that for poly(vinyl sulfate). The half‐height width for heparin was broad and different from that of the vinyl polyanions. According to the analysis by Frumkin isotherm, the interaction between cationic surfactants was attractive in heparin complex at CPE, however, in the vinyl polyanion complexes at CPE the interaction was non‐cooperative as that predicted with the Langmuir isotherm. In spite of the same adsorption state, the concentration dependency of the peak current for poly(styrene sulfonate) was quite different from that for poly(vinyl sulfate). The concentration dependence indicated the reactive property of each polyanion on the association with the cationic surfactant in aqueous solution.     

Simultaneous detection of cadmium, copper, and lead using a carbon paste electrode modified with carbamoylphosphonic acid self-assembled monolayer on mesoporous silica (SAMMS)

A new sensor was developed for simultaneous detection of cadmium (Cd²⁺), copper (Cu²⁺), and lead (Pb²⁺), based on the voltammetric response at a carbon paste electrode modified with carbamoylphosphonic acid (acetamide phosphonic acid) self-assembled monolayer (SAM) on mesoporous silica (Ac-Phos SAMMS). The adsorptive stripping voltammetry (AdSV) technique involves preconcentration of the metal ions onto Ac-Phos SAMMS under an open circuit, then electrolysis of the preconcentrated species, followed by a square wave potential sweep towards positive values. Factors affecting the preconcentration process were investigated. The voltammetric responses increased linearly with the preconcentration time from 1 to 30 min or with metal ion concentrations ranging from 10 to 200 ppb. The responses also evolved in the same fashion as adsorption isotherm in the pH range of 2-6. The metal detection limits were 10 ppb after 2 min preconcentration and improved to 0.5 ppb after 20 min preconcentration.     

阴离子导向组装：两个具有不同阳离子的多维Ag(I)配合物的晶体结构

Assembly of [Ag（CN）2]^- units with M（Ⅱ）-diamine complex cations [Cu（LN-N）2]^2＋, where LN-N represents L2-diaminopropane （pn） and ethylenediamine （en）, afforded two complexes, [Cu（pn）2][Ag2（CN）4] （1） and [Cu（en）2][Ag3（CN）5] （2）, which were characterized by elemental analysis, IR, UV-Vis and ESR spectra. Single crystal X-ray analyses show that these complexes have 2D and 3D architectures through silver-silver interactions and other weak interactions. The luminescence behaviors of the two complexes were also studied by means of emission spectra.     

Zum Reaktionsverhalten der Tris(dialkylthiophosphinyl)phosphane – Die Kristallstruktur von [Ag{O[P(S)Me2]2}2] [AsF6]

Reactivity of Tris(dialkylthiophosphinyl)phosphines – Crystal Structure of [Ag{O[P(S)Me₂]₂}₂][AsF₆] In contrast to tris(dialkylphosphoryl)phosphines the reaction of tris(dimethylthiophosphinyl)phosphine with transition metal hexafluoroarsenates of the type [M(SO₂)_m [AsF₆]_n (M = Ag, m = 0, n = 1; M = Fe, Cd, m = n = 2) forms no molecular 2 : 1-complexes but polymeric products. The silver polymer is transformed into [Ag{O[P(S)Me₂]₂}₂][AsF₆], which is also formed by the reaction of Ag[AsF₆] with O[P(S)Me₂]₂. It crystallizes in the space group P1 with a = 862.5(2), b = 1 241.4(2), c = 1 254.0(3)pm, α = 80.34(1), β = 101.99(6), γ= 73.75(1)° (at 20°C) and Z = 2. The central silver atom is surrounded by four sulphur atoms in a slighly distorted tetrahedron. The average (Ag? S) and (P? S) bond lengthes are 259.4(2) pm and 194.9(2)pm, respectively.     

Degree of hydration in cement paste and C<Subscript>3</Subscript>A-sodium carbonate-water systems

This research provides a fundamental understanding of the early stage hydration of Portland cement paste, tricalcium aluminate (C₃A) paste at water to cement ratio of 0.5 and C₃A suspension at water to cement ratio of 5.0 modified by 2 or 4 mass% of sodium carbonate. A high conversion of unreacted clinker minerals to gel-like hydration products in the cement-Na₂CO₃ pastes takes place rapidly between 1^st to 24^th h. Contrary the Ca(OH)₂ formation within the same time interval is retarded in the excess of CO₃²⁻ ions due to intensive rise and growth of CaCO₃ crystals in hydrated cement. Later, the conversion of clinker minerals to the hydrate phase is reduced and higher contents of calcite and vaterite relative to that of Ca(OH)₂ in comparison with those found in the Portland cement paste are observed. As a consequence a decrease in strength and an increase in porosity between hardened Portland cement paste without sodium carbonate and those modified by Na₂CO₃ are observed. C₃A hydrates very quickly with sodium carbonate between 1^st and 24^th h forming hydration products rich in bound water and characterized also by complex salts of (x)C₃A·(y)CO₂·(zH₂O type, whereas C₃A-H₂O system offers C₃AH₆ as the main hydration product. Higher content of the formed calcium aluminate hydrates in C₃A-Na₂CO₃-H₂O system also contributes to early strength increase of Portland cement paste.     

From Weakly Coordinating to Non‐Coordinating Anions? A Simple Preparation of the Silver Salt of the Least Coordinating Anion and Its Application To Determine the Ground State Structure of the Ag(η2‐P4)2+ Cation

The unexpected but facile preparation of the silver salt of the least coordinating [(RO)₃Al‐F‐Al(OR)₃]^? anion (R=C(CF₃)₃) by reaction of Ag[Al(OR)₄] with one equivalent of PCl₃ is described. The mechanism of the formation of Ag[(RO)₃Al‐F‐Al(OR)₃] is explained based on the available experimental data as well as on quantum chemical calculations with the inclusion of entropy and COSMO solvation enthalpies. The crystal structures of (RO)₃Al←OC₄H₈, Cs⁺[(RO)₂(Me)Al‐F‐Al(Me)(OR)₂]^?, Ag(CH₂Cl₂)₃⁺[(RO)₃Al‐F‐Al(OR)₃]^? and Ag(η²‐P₄)₂⁺[(RO)₃Al‐F‐Al(OR)₃]^? are described. From the collected data it will be shown that the [(RO)₃Al‐F‐Al(OR)₃]^? anion is the least coordinating anion currently known. With respect to the fluoride ion affinity of two parent Lewis acids Al(OR)₃ of 685 kJ mol^?1, the ligand affinity (441 kJ mol^?1), the proton and copper decomposition reactions (?983 and ?297 kJ mol^?1) as well as HOMO level and HOMO–LUMO gap and in comparison with [Sb₄F₂₁]^?, [Sb(OTeF₅)₆]^?, [Al(OR)₄]^? as well as [B(R^F)₄]^? (R^F=CF₃ or C₆F₅) the [(RO)₃Al‐F‐Al(OR)₃]^? anion is among the best weakly coordinating anions (WCAs) according to each value. In contrast to most of the other cited anions, the [(RO)₃Al‐F‐Al(OR)₃] anion is available by a simple preparation in conventional inorganic laboratories. The least coordinating character of this anion was employed to clarify the question of the ground state geometry of the Ag(η²‐P₄)₂⁺ cation (D_2h, D₂ or D_2d?). In agreement with computational data and NMR spectra it could be shown that the rotation along the Ag‐(P‐P‐centroid) vector has no barrier and that the structure adopted in the solid state depends on packing effects which lead to an almost D_2h symmetric Ag(η²‐P₄)₂⁺ cation (0 to 10.6° torsion) for the more symmetrical [Al(OR)₄]^? anion, but to a D₂ symmetric Ag(η²‐P₄)₂⁺ cation with a 44° twist angle of the two AgP₂ planes for the less symmetrical [(RO)₃Al‐F‐Al(OR)₃]^? anion. This implies that silver back bonding, suggested by quantum chemical population analyses to be of importance, is only weak.     

适合铝丝键合后热老化要求的金导体浆料

研究了一种适合铝丝键合后热老化要求的金导体浆料，性能达到使用要求。在金浆中添加了少量合金元素，并选用混合型粘结剂。对金导体铝丝焊后热老化失效机理以及添加合金元素的作用，进行了讨论     

Green synthesis and characterization of silver nanoparticles by Allium cepa L. to produce silver nano‐coated fabric and their antimicrobial evaluation

This research work was proposed to study the antimicrobial activity of the silver nanocoated fabric with the purpose of producing good dressing and clothing material. We synthesized simple, ecofriendly, cost‐effective and sustainable silver nanoparticles by using the aqueous extract of Allium cepa L. Here, A. cepa L. acts as a good reducing and capping agent that produced stable silver nanoparticles having particle size of range 36 ± 1 to 98 ± 2 nm, Poly dispersiblity index 0.234 ± 0.61 to 1.023 ± 0.33 and Zeta potential ‐12 ± 1.5 mV to ‐26 ± 1.2 mV. The effect of temperature and extract volume used was considered for optimization of synthetic procedure. The nanocoated fabric was characterized for morphological study, size (using transmission electron microscopy (TEM) and field emission scanning electron microscopy (FE‐SEM) and zeta‐potential (Zeta Potentiometer). The presence of functional groups were observed by using attenuated total reflection‐Fourier transform infrared (ATR‐FTIR) and Raman spectroscopy. The crystallinity and structural property of the synthesized silver nanoparticles were studied in terms of Powder X‐ray diffraction (PXRD). An IC₅₀ value and zone of inhibition was studied which demonstrate that the silver nanocoated fabric have an excellent antibacterial property against Gram‐negative (Escherichia coli) and Gram‐positive (Staphylococcus aureus) bacteria. Further nanocoated fabric material was washed (with function of time 0, 10, 25, and 50 laundry cycles) and still retained their anti‐bacterial activity towards both strain. Initially there was 52 μg/ml of silver nanoparticles on the cotton fabric but after 50 laundry cycle in 500 ml of distilled water the fabric showed 92% efficiency against gram positive and 90% efficacy toward gram negative bacteria. It was found that 4.16 μg/ml nano particles leached in case of S. Aureus and 5.2 μg/mL silver nanoparticles leached in case of E. coli. Nanocoated fabric material synthesized using green synthesis was found to be economical with good resistance to washing.