Optical Nanocomposite Planar Waveguides Doped with Rare-Earth and Noble Metal Elements

The present paper is focused on multilayer Er³⁺-doped silica-titania planar waveguides, co-doped with silver, which were prepared by spin-coating on silica glass, or buffered single crystal silicon substrates. The single layer thickness (0.4 m) and refractive index (1.60–1.63) were measured by spectroscopic ellipsometry at 715 nm. The thickness of the waveguides (measured by mechanical profilometry) was 1 m and their optical propagation losses were measured at different laser wavelengths (488 nm, 514 nm and 633 nm), exhibiting an approximately Rayleigh-like behavior. The thermal precipitation of silver nanocrystallites was achieved, both in air and under a controlled atmosphere (dry nitrogen) and these were characterized by visible absorption spectroscopy, which clearly showed the development of a plasmon absorption band near 415 nm, by X-ray diffraction (XRD) and Transmission Electron Microscopy (TEM). The Er³⁺ metastable level lifetimes for the emission at ca. 1.54 m were found to be ca. 4–6 ms, for Er³⁺ concentrations varying between 0.2–2.0 mol% (or (0.4–4.4) × 10²⁰ ions/cm³), but no significant variation was observed with the Ag concentration added (up to 2.5 mol%).     

Complexing equilibria and redox potentials of the Ag(II)/Ag(I) system in the presence of 2,2′:6′,2″-terpyridine in water

Summary The conditional protonation constants (=0.1) for 2,2:6,2-terpyridine, logK ₁=4.93, logK ₂=3.69, were determined by thepH-metric method. The compositions of complexes of Ag²⁺ and Ag⁺ ions with 2,2:6,2-terpyridine (tp) were studied and equilibria of the complex formation process were described. The values of conditional complex formation constants are as follows: for Ag(tp) ₂ ⁺ :log₀₁=5.79, log₀₂=9.68, for Ag(tp) ₂ ²⁺ :log₀₂=25.31, while the conditional constant of the Ag(tp)NO₃ precipitate formation is:K _SO=2.45·10⁴. Using coulometric and chronovoltamperometric measurements, the redox systems being formed in the complex solutions of Ag(II) and Ag(I) were determined and described including their formal potentials.

---

Komplexibildungsgleichgewichte und Redoxpotentiale des Systems Ag(II)/Ag(I) in Gegenwart von 2,2:6,2-Terpyridin in Wasser

Zusammenfassung Mit Hilfe derpH-metrischen Methode wurden die konditionalen Protonationskonstanten (=0.1) von 2,2:6,2-Terpyridin bestimmt: logK ₁=4.93, logK ₂=3.69. Es wurde auch die Zusammensetzung der Komplexe von Ag(II) und Ag(I) mit 2,2:6,2-Terpyridin(tp) bestimmt sowie die Gleichgewichte der komplexbildung beschrieben. Die Werte der Konditionalkomplexbildungskonstanten sind: für Ag(tp) ₂ ⁺ :log₀₁=5.79, log₀₂=9.68, für Ag(tp) ₂ ²⁺ :log₀₂=25.31 und für das Löslichkeitsprodukt Ag(tp)NO₃:K _SO ^–1 =4.08·10^–5. Die in Komplexlösungen von Ag(II) und Ag(I) vorliegenden Redoxsysteme wurden mittels cyclischer Voltametrie und Coulometrie untersucht und die Formalpotentialwerte dieser Systeme in Wasser bestimmt.

     

一步法合成吲哚用Ag／SiO2催化剂的失活及其抑制

 用简单浸渍法制备了Ag／SiO2催化剂．该催化剂对苯胺和乙二醇一步合成吲哚表现出很高的催化活性，但同时存在明显的失活．TG，XRD和TEM表征结果表明，催化剂失活的主要原因是反应过程中催化剂表面的积碳和银粒子的烧结．向反应体系中通入氢和水蒸气能够减少催化 剂表面的积碳；向催化剂体系加入ZnO助剂能较大程度地提高银的分散度，并能有效抑制反应过程中银粒子的烧结．     

Construction of database of effective energy‐loss functions

Effective energy‐loss functions for Al, Cu, Ag and Au were derived from the reflection electron energy‐loss spectroscopy (REELS) spectra for 1 keV electrons using extended Landau theory. Features of the obtained effective energy‐loss functions are close to those of optical surface energy‐loss functions, revealing the significant contribution of the low energy loss below a few tens of electron‐volts in the REELS spectrum for Cu, Ag and Au. The REELS spectra were reproduced using the newly derived effective energy‐loss functions, leading to the confirmation that this type of database of the effective energy‐loss function is very useful not only for more comprehensive understanding of the measured spectrum of surface electron spectroscopies but also for practical background subtraction in surface electron spectroscopy. Copyright © 2003 John Wiley & Sons, Ltd.     

Stripping Voltammetry of Mercury(II) with a Chemically Modified Carbon Paste Electrode Containing Silica Gel Functionalized with 2,5‐Dimercapto‐1,3,4‐thiadiazole

The accumulation voltammetry of mercury(II) was investigated at a carbon paste electrode chemically modified with silica gel functionalized with 2,5‐dimercapto‐1,3,4‐thiadiazole (DTTPSG‐CPE). The repetitive cyclic voltammogram of mercury(II) solution in the potential range ?0.2 to +0.8 V (vs. Ag/AgCl), (0.02 mol L^?1 KNO₃ ; v=20 mV s^?1) show two peaks one at about 0.0 V and other at 0.31 V. However, the cathodic wave peak, around 0.0 V, is irregular and changes its form in each cycle. This peak at about 0.0 V is the reduction current for mercury(II) accumulated in the DTTPSG‐CPE. The anodic wave peak at 0.31 V is well‐defined and does not change during the cycles. The resultant material was characterized by cyclic and differential pulse anodic stripping voltammetry performed with the electrode in differents supporting electrolytes. The mercury response was evaluated with respect to pH, electrode composition, preconcentration time, mercury concentration, “cleaning” solution, possible interferences and other variables. The precision for six determinations (n=6) of 0.05 and 0.20 mg L^?1 Hg(II) was 2.8 and 2.2% (relative standard deviation), respectively. The method was satisfactory and used to determine the concentration of mercury(II) in natural waters contaminated by this metal.     

A novel method for determination of magnesium in urine and water samples with mercury film-plated carbon paste electrode

A square wave adsorptive stripping voltammetric (SWAdSV) method for the indirect determination of trace amounts of magnesium with thiopentone sodium (TPS) as an electroactive ligand, at carbon paste mercury film electrode (CP-MFE) is proposed. It is observed that the increase of the square wave voltammetric cathodic peak current of TPS, under alkaline conditions, is linear with the increase of Mg concentration. Under optimum experimental conditions viz.; pH 10.75, 3×10⁻⁵ M TPS and 0.05 M phosphate buffer (Na₂HPO₄-NaH₂PO₄), a linear relation in the range 6×10⁻⁹ to 9×10⁻⁸ M Mg²⁺ (0.14-2.16 ppb), at 60 s deposition time, is obtained. The detection limit of Mg²⁺ is 0.14 ppb for 60 s deposition time with the relative standard deviation is 0.5% (n=5). The proposed method was successfully applied to the determination of magnesium in urine and tap water samples with satisfactory results. The data obtained are compared with the standard flame atomic absorption spectrophotometric method (FAAS).     

Electrocatalytic activity of dispersed platinum and silver alloys and manganese oxides for the oxygen reduction in alkaline electrolyte

This work reviews the studies conducted in this laboratory of the oxygen reduction reaction (ORR) on electrocatalysts formed by Pt-M/C (M = V, Cr, Co) and Ag-Pt/C alloys and on different Mn oxides (MnO/C, Mn₃O₄/C, MnO₂/C) in KOH electrolyte. The physical and electronic properties of the materials are investigated by in situ XAS (x-ray absorption spectroscopy) in the XANES (x-ray absorption near edge structure) region. The electrocatalytic activity for the ORR on the different catalysts is compared through mass-transport-corrected Tafel plots. The XANES results for the Pt-M/C and Ag-Pt/C composites at high electrode potentials show lower vacancy of the Pt 5d band compared to pure Pt/C, while for the results indicate a chance of the Mn oxidation state as a function of the electrode potential. The electrochemical measurements evidence increased electrocatalytic activity of the Pt alloys compared to pure Pt and this is attributed to a lowering of the adsorption strength of adsorbed oxygen species caused by the reduced Pt reactivity. An activity enhancement of the Ag atoms on the Ag-Pt/C alloys compared to pure Ag is ascribed to an electronic effect induced by the presence of Pt, increasing the Ag-O adsorption strength. In the case of the Mn_yO_x/C materials, the electrochemical results show low activity for MnO/C and higher activity for MnO₂/C and Mn₃O₄/C. This is explained based on the activation for the ORR, which is higher for the material with higher MnO₂ contents and the occurrence of a mediation processes involving the reduction of Mn(IV) to Mn(III), followed by the electron transfer of Mn(III) to oxygen. Published in Russian in Elektrokhimiya, 2006, Vol. 42, No. 12, pp. 1417–1426. Based on the report delivered at the 8th International Frumkin Symposium “Kinetics of the Electrode Processes,” October 18–22, 2005, Moscow. The text was submitted by the authors in English.     

Photogeneration of Silver Particles in PVA Fibers and Films

Fibers and films prepared from blends of poly(vinyl alcohol) and poly(acrylic acid) were found to be suitable matrices for the solid-state photoreduction of silver ions in the presence of air. Fast generation of nanometer-sized silver crystallites was observed when fibers of polymer blends crosslinked with dimethyl sulfoxide were irradiated with 350nm light. Optical determinations of the formation kinetics were carried out using thin films of noncrosslinked as well as lightly and heavily crosslinked polymer blends. Small Ag clusters were detected initially, which were stable in the dark but transformed into larger metal particles upon further illumination. Both formation processes occurred only under high light intensity illumination and the kinetic data were inconsistent with monophotonic mechanisms.     

The electrocatalytic examination of cephalosporins at carbon paste electrode modified with CoSalophen

The electrocatalytic oxidation of cephalexin and cefazolin has been studied at a carbon paste electrode modified with cobalt salophen (CoSal) by cyclic voltammetry. The selectivity of the carbon paste modified with CoSal in detecting cephalexin and cefazolin was examined. To suggest the electrocatalytic mechanism for electro-oxidation of cefazolin, the electrochemical behavior of ceftriaxone was investigated which has a thiol group out of the beta lactam ring. The electrocatalytic oxidation of these antibiotics is shown to be irreversible at the CoSal modified electrode. Scan rate dependence of cefazolin, which is a sulfur-containing compound, has been examined. The results indicated that the electrocatalytic oxidation of the compounds is diffusion controlled. The responses of the modified electrode were compared with those of unmodified electrode and it has shown that the modified electrode has better sensitivity than unmodified electrode to the detection of cefazolin. The overall number of electrons contributed to the oxidation of cefazolin is obtained 1 by chronoamperometry; the number of electron involved in the rate-determining step was 1. The results of differential pulse voltammetry (DPV) using the modified electrode with high sensitivity were applied for the determination of cefazolin in human synthetic serum samples. The linear range was obtained from 1 × 10⁻⁵ to 1 × 10⁻³ M for DPV determination of cefazolin in buffered solutions (pH 3.0).     

Voltammetric determination of azithromycin at the carbon paste electrode

Azithromycin (AZ) is the first member of a class of macrolide azalides antibiotics called azolides. A simple and selective square-wave voltammetric (SWV) method has been developed for the determination of azithromycin in pure form, in pharmaceutical preparation and in biological samples. Determination of azithromycin was accomplished with hand-make carbon paste electrode (CPE) in oxidative screen mode. The counter and reference electrodes were a Pt wire and a Ag/AgCl, respectively. Various parameters that can influence the peak signal (effect of buffer, ionic strength, accumulation time, pH and the composition of the paste) have been scrutinized. The best results were obtained in acetonitrile—aqueous 1 M sodium acetate-acetic acid buffer (pH 4.6) containing 0.1 M KCl (1:9; v/v) using a 15% paraffin oil CPE. The limits of detection and quantification of the pure drug are 0.463 and 1.544 ppb (with the correlation coefficient, r=0.9785and the standard deviation, S.D.=0.1 (n=5), for the accumulation time of 60 s), respectively. The method was successfully applied to the determination of the drug in urine and two forms of pharmaceutical formulations. Recoveries were 99.2—100.5% with S.D.=0.1—and 0.8% (n=5).