Rapid determination of organochlorine pesticide residues in feeds by capillary gas chromatography

A simple micro-method is described for determination of 15 organochlorine pesticide residues in mixed feeds. Clean-up of the petroleum ether extract is by basic alumina minicolumn chromatography and quantitative identification is by capillary gas chromatography with electron capture detection. Cyanopropyl-polysiloxane chemically bonded fused silica capillary columns have been used to perform high resolution analyses in short time as well as to overcome possible interferences by PCBs. Recovery, repeatability, and detection limits of the proposed procedure are checked and results are also reported for non random samples of 180 feeds collected in Italy.     

A critical reappraisal of recent communications on the hydrodynamic characterization of silica (aerosil) hydrosols

Different results from recent communications on the hydrodynamic characterization of ultrasonicated silica (®Aerosil) hydrosols led to a critical reappraisal of the data.It can be concluded that the degree of dispersion achievable in pyrogenic (Aerosil) hydrosols by ultrasonication is highly sensitive to the detailed parameters of the dispersion process. Characterization in terms ofabsolute numbers of a limiting particle morphology, corresponding to minima of aggregate size, porosity and number of primary particles in the aggregate is not possible.The most straightforward approach for hydrodynamic characterization seems to be a combination of sedimentation and diffusion data.Other approaches using a combination of sedimentation and viscosity data underestimate the particle dimensions. Moreover, they are quite arbitrary since the final result depends upon the proper choice between several equations for fitting the viscosity concentration dependence; the most rigorous approach seems to be an extended Einstein equation which has recently been adapted to particle aggregates.     

Thermal decomposition of surface compounds for the generation of small quantities of acetaldehyde: Calibration of a thermal desorption-gas chromatography-flame ionization detection

The paper presents a new method for the generation of acetaldehyde in the amounts that allow to calibrate the measuring system. The method is based on thermal decomposition of surface compounds at the range 130-190 °C, in which an acetaldehyde as the decomposition product is released. The synthetic pathway leading to the desired surface compounds is described. Investigations demonstrated that the synthesis of the compounds on the surface of the support material (silica gel) was carried out homogeneously. The technique proposed was used for the generation of gaseous standard mixtures containing acetaldehyde for the calibration of a thermal desorber-gas chromatograph-flame ionization detector system.     

Temperature dependence of the resolution of diastereomeric isoprenoids in capillary GC. Experiments with 50 μm, 100 μm,and 250 μm i.d. Columns

The resolution of the diastereoisomers of norpristane, pristane, and phytane was studied as a function of the column internal diameter and/or the residence time of the compounds in the column. Increasing the residence time in the column by operating the column at a lower temperature program rate enhances the resolution more than reducing the internal diameter of the column. Practical experience with ultra narrow bore columns is also presented.     

Study of modified silicas by inverse gas chromatography. Part I: Influence of chain length on grafting ratio

Summary Silica has been modified by an esterification reaction using either n-alcohols or - diols. The grafting ratios were evaluated by elemental analysis of carbon or by the weight loss of the grafted silica heated to 700°C. The grafting ratio can be easily fixed by changing the silica to reactant impregnation ratios. In the case of n-alcohols, the grafting ratios do not vary monotonously with the number of carbon atoms of the grafts and the density of the grafted layer is 25% higher for - diols than for n-alcohols. This observation needs further investigation.     

一步法合成吲哚用Ag／SiO2催化剂的失活及其抑制

 用简单浸渍法制备了Ag／SiO2催化剂．该催化剂对苯胺和乙二醇一步合成吲哚表现出很高的催化活性，但同时存在明显的失活．TG，XRD和TEM表征结果表明，催化剂失活的主要原因是反应过程中催化剂表面的积碳和银粒子的烧结．向反应体系中通入氢和水蒸气能够减少催化 剂表面的积碳；向催化剂体系加入ZnO助剂能较大程度地提高银的分散度，并能有效抑制反应过程中银粒子的烧结．     

一种新型的空心镍纳米球的合成

通过以二氧化硅粒子作为模板和金纳米粒子为表面晶种的方法制备了壳厚度可控的镍空心球。采用TEM﹑XRD对二氧化硅/镍复合球和镍空心球进行了表征和研究。结果表明镍纳米壳是由似针状的面心立方的镍纳米粒子构成的，碱溶液处理过程不影响镍纳米壳的形貌。高温处理显示镍空心球具有良好的热稳定性。     

Monte—Carlo model of the diffusion-limited reaction kinetics in microheterogeneous media. Comparison with the experimental plots of the forward and backward electron phototransfer kinetics on the pore diameter in silica gel

The kinetics of the diffusion-limited decay reaction A + B B was simulated by the Monte—Carlo method on a two-dimensional square lattice with defects presented by randomly distributed sites. The cases were considered where [B] [A] at the random initial distribution (quenching reaction) and [B] = [A] with the initial distribution of the A and B particles on neighboring sites (geminate recombination). The kinetic curves were approximated by the simplest analytical equation [A]/[A]₀ = (1 – )exp[–(kt)^1–h ] + (where k and are constants). The plots of the heterogeneity parameter (h) and time-averaged first-order rate constant vs. concentration of defects (p) or B particles (in the case of quenching) were obtained and compared with similar correlations obtained earlier by the experimental study of the kinetics of forward (quenching reaction) and backward (geminate recombination) electron phototransfer on the surface of different porous silica gels. The experimental plots of h vs. silica gel porosity are in satisfactory agreement with the plots of h vs. p in the model space, if the fraction of volume inaccessible for reactants, calculated from the free silica gel volume, is chosen as the p parameter for silica gel.Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1536–1541, August, 2004.     

Nanorods of Various Oxides and Hierarchically Structured Mesoporous Silica by Sol-Gel Electrophoresis

In this paper, we report the template-based growth of nanorods of oxides and hierarchically structured mesoporous silica, formed by means of a combination of sol-gel processing and electrophoretic deposition. Both single metal oxides (TiO₂) and complex oxides (Pb(Zr_0.52Ti_0.48)O₃) have been grown by this method. This method has also been applied to the growth of nanorods of mesoporous silica having an ordered pore structure, where the pores are aligned parallel to the long axis of the nanorod. Uniformly sized nanorods of about 125–200 nm in diameter and 10 m in length were grown over large areas with near unidirectional alignment. Appropriate sol preparation yielded the desired stoichiometric chemical composition and crystal structure of the oxide nanorods, with a heat treatment (500–700°C for 15–30 min) for crystallization, densification and any necessary pyrolysis.     

New hybrid chelating sorbents with grafted 3-aminopropionate groups based on mixed silicon,aluminum, titanium,or zirconium oxides

A series of new hybrid organo-inorganic sorbents with the 3-aminopropionate chelating group was synthesized. The synthesis includes the copolycondensation (sol—gel method) of tetraethoxysilane, 3-aminopropyltriethoxysilane, and several modifiers (MeSi(OEt)₃, EtSi(OEt)₃, Ti(OEt)₄, AlONO₃, ZrOCl₂) followed by carboxyethylation with acrylic acid. The obtained chelating sorbents were characterized by elemental analysis, FT-IR and ¹H NMR spectroscopy, and thermogravimetry. The N-carboxylated sorbents have a higher sorption capacity with respect to metal ions (0.5–0.9 mmol g⁻¹, pH 6.3, NH₄OAc, 20 °C) than the starting sorbents with the primary amino group (0.05–0.2 mmol g⁻¹) and manifest high selectivity for copper(II) ion extraction. __________ Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1783–1788, August, 2005.