担载型铱催化剂上CO吸附量热和红外光谱研究

分别对Al2O3和SiO2担载的不同含量铱(Ir)催化剂进行了H2程序升温还原、CO微量吸附量热和红外研究.结果表明,还原后,Ir/Al2O3上存在金属态Ir0和氧化态Irδ 两种物种,CO在催化剂表面主要以线式和孪生吸附态存在,测量的CO吸附热为两种吸附形式的平均吸附热.提高还原温度和Ir担载量,Ir/Al2O3表面CO线式吸附物种的比例增加,从而导致CO吸附热值的升高.而在Ir/SiO2上Ir物种主要为金属态Ir0,CO吸附都以线式吸附为主,在所考察的条件下CO吸附热随Ir担载量和还原温度的变化不明显。     

通讯波段禁带胶体光子晶体的制备及实验参数研究

采用直径为700nm的二氧化硅微球,通过垂直沉积法在玻璃基片上制备了位于光通讯波段的禁带胶体光子晶体。研究了不同蒸发温度、湿度条件、干燥过程对样品晶体质量的影响。用扫描电子显微镜(SEM)对其形貌进行了观测。实验结果表明,在温度为65℃,相对湿度为70%,缓慢干燥条件下制备出的样品具有较好的晶体质量,晶体在大范围内保持了面心立方(FCC)单晶结构,其(111)面平行于生长基片。     

Acyclovir release from its composites with silica as a function of the silica matrix modification and the drug loading

Acyclovir release from its composites with unmodified silica at pH 1.6 and 7.4 follows zero order kinetics for two days. Modification of the silica matrix with phenyl groups leads to dramatic decrease in the drug release level at pH 7.4 compared with pH 1.6 as well as to heterogeneous phase state of acyclovir in the phenyl modified composite with high loading of the drug.     

纳秒激光诱导熔石英光学玻璃的损伤增长

利用Nd:YAG激光器研究了纳秒激光诱导熔石英光学玻璃的初始损伤及损伤增长,对比研究了损伤程度和损伤形貌随激光波长、能量密度、脉冲数及位置的变化规律,并对损伤机制进行了分析和讨论。研究结果表明：初始损伤受损伤先驱的物理化学性质和激光参数的影响,而损伤增长规律与初始损伤程度、激光参数和位置有关;后表面的损伤随脉冲数的增加呈指数关系增长,前表面则呈线性关系;裂纹的产生及其在后续脉冲辐照下的发展是后表面损伤增长的主要原因,高温等离子体表面刻蚀是前表面损伤增长的主要原因     

NiZn铁氧体粉料生产中喷雾造粒用料浆的研究

通过控制料浆中粉料的粒度及料浆固含量,制成喷雾颗粒料。研究了在此条件下制成的喷雾颗粒料特性。结果表明:当粉料的粒度(D50,下同)控制在1.5μm时,颗粒料中聚乙烯醇的质量分数可从0.73%增加到1.33%,从而使喷雾颗粒料的粘结性得到加强;当料浆固含量(质量分数)由64.52%增加到68.97%时,喷雾颗粒料的表观密度由1.30g/cm3提高到1.40g/cm3以上。     

退火参数对熔石英透射波前和损伤阈值的影响

采用高温退火技术去除熔石英元件表面由于CO2激光修复带来的残余应力,研究了退火环境对元件的表面污染,分析了不同退火温度（600～900 ℃）和保温时间（3～10 h）对于元件残余应力、透射波前、表面粗糙度和激光损伤阈值的影响。结果表明:在800 ℃以下,高温退火10 h可有效去除CO2激光修复带来的残余应力,对元件的透射波前和表面粗糙度无明显影响;石英保护盒能有效减少退火环境对元件表面产生的污染,但仍有X射线光电子能谱检测不到的表面污染物存在;在退火后采用质量分数为1%的HF刻蚀15 min,激光损伤阈值可恢复,同时元件透射波前和表面粗糙度并无明显的增加。     

Synthesis of SiO2@SiO2 core-shell microspheres using urea-formaldehyde polymers as the templates for fast separation of small solutes and proteins

The monodisperse superficially porous core-shell silica microspheres (CSSMs) with controllable shell thickness and pore size were synthesized by an improved polymerization-induced colloid aggregation (PICA) approach for fast separation of small solutes and proteins.     

Gadolinium‐Decorated Silica Microspheres as Redox‐Responsive MRI Probes for Applications in Cell Therapy Follow‐Up

The redox microenvironment within a cell graft can be considered as an indicator to assess whether the graft is metabolically active or hypoxic. We present a redox‐responsive MRI probe based on porous silica microparticles whose surface has been decorated with a Gd‐chelate through a disulphide bridge. Such microparticles are designed to be interspersed with therapeutic cells within a biocompatible hydrogel. The onset of reducing conditions within the hydrogel is paralleled by an increased clearance of Gd, that can be detected by MRI.