Preparation and characterization of silicate gel glasses containing Cr2O3

The effect of thermal treatment on the structural incorporation of Cr₂O₃ in xCr₂O₃·(100 – x)SiO₂ and 5R _n O·xCr₂O₃·(95 – x)SiO₂ (where x=0.01–1 mol.% and R=Li, Na and Ca) gel glasses was studied by optical absorption spectrophotometry, DTA-TG, XRD and electron microscopy.Samples heat treated at 60°C have green color due to the presence of Cr³⁺ in octahedral coordination. The optical transmission, and color (yellow, orange or ambar), of the samples heat treated between 200 and 700°C prove that Cr³⁺ (octahedrally coordinated) and Cr⁶⁺ (tetrahedrally coordinated) are both present. Segregation of Cr₂O₃ take place at temperatures above 800°C.In reducing conditions the gel glasses were green due to the presence of a high content of Cr³⁺ ions. Samples containing Li or Na show crystalline phases at temperatures below 850°C.     

Deactivation of fused silica capillary columns with cyanopropylhydrosiloxanes

A method is described for surface deactivation and modification of fused silica capillary columns with a cyanopropyl-containing reagent. The deactivation procedure involved a dehydrocondensation reaction between a bis(cyanopropyl)methylhydropolysiloxane reagent and surface silanol groups at an optimum temperature of only 250°C. Actual critical surface tension measurements were made using the capillary rise method. Excellent deactivation for acidic and basic compounds at the low ng level, and wettability for nonpolar and polar polysiloxane stationary phases were obtained. A procedure was developed to remove acidic impurities that are present in polar stationary phases.     

Thermal analysis of PMMA/gel silica glass composites

Thermal analysis of poly-methylmethacrylate (PMMA) impregnated porous gel silica glasses confirms that the PMMA chains form hydrogen bonds with the pore surface silanol groups. The adopted conditions for the insitu polymerisation result in about 4% of residual monomers trapped in the polymer, most of them in the amorphous structure. The polymer and monomer mixture takes up the whole of the free pore volume. Most of the residual monomer polymerises during the DSC scans above the glass transition temperature providing an excellent probe for the weak glass transition. Polymerisation in the gel silica glass medium affects the glass transition temperature, the length of polymer chains, and the degree of polymerisation.     

负载型双噁唑啉催化剂上的不对称Diels-Alder反应

 分别以乙烷桥键磺酸官能化的有机-无机杂化介孔材料、十二钨磷酸铯、活化硅胶以及SBA-15为载体,通过非共价键作用制备了负载型双噁唑啉催化剂,并将该催化剂用于催化3-((E)-2-丁烯酰基)-1,3-噁唑啉-2-酮和环戊二烯的不对称Diels-Alder反应. 研究表明,催化剂的性能取决于载体本身以及载体表面阴离子的性质. 以SBA-15为载体时产物的对映体选择性较低,可归因于载体表面较低的羟基浓度.     

DSC study and computer modelling of the melting process in ice slurry

In order to understand the non-isothermal melting kinetics in the ice slurry, a differential scanning calorimetry (DSC) was used. Experimental results were compared to those obtained by a numerical simulation in which a general enthalpy method was applied. In this work the ice slurry studied consists of ice particles uniformly dispersed within a water-antifreeze liquid mixture. The effects of the heating rate and the initial antifreeze mass fraction are discussed. It has been found that the temperature gradients inside the sample of the solution become important if either heating rate increases or initial antifreeze mass fraction decreases.     

Effect of the Measurement Temperature on the Dispersive Component of the Surface Free Energy of a Heat Treated SiO2 Xerogel

The surface free energy of a monolithic silica xerogel treated at 1000°C has been measured by inverse gas chromatography in the temperature range 25–150°C using n-alkanes. Values of the dispersive component, _S ^D, vary from 49.07 mJ·m^–2 at 25°C to 17.20 mJ·m^–2 at 150°C. The _S ^D value obtained at 25°C is lower than that found for amorphous and crystalline silicas but higher than that found for glass fibres meaning that the heat treatment at 1000°C changes drastically the structure of the silica xerogel showing a surface similar to a glass. However, the higher value of _S ^D in comparison to glass fibres can be attributed to the mesoporous structure present in the silica xerogel. In the temperature range of 60–90°C there exists an abrupt change of the _S ^D values as well as in the dispersive component of the surface enthalpy, h _S ^D. Such abrupt change can be attributed to an entropic contribution of the surface free energy.     

亲水作用色谱法测定表阿霉素及其杂质

建立了一种以亲水作用色谱分离测定表阿霉素的新方法。采用硅胶色谱柱及高极性有机溶剂水相缓冲溶液流动相。对流动相的pH、缓冲溶液的浓度及流速进行了优化,确定了以乙腈甲酸钠缓冲溶液(pH2.9)(90∶10,V/V)作为流动相的最佳条件。对优化的分离条件进行系统适应性实验,结果表明表阿霉素与有关杂质之间的分离度和拖尾因子均达到药典要求。该法具有良好的线性(相关系数0.9971～0.9991)和重复性(峰面积RSD<1.0%),方法简便实用,用于实际样品分析,结果满意。     

多孔二氧化硅中Gd3+ → Eu3+的能量传递

通过水热反应法，获得了单掺和双掺Eu³⁺，Gd³⁺的多孔二氧化硅组装体，研究了掺杂体系的光谱特性，观察到Gd³⁺ → Eu³⁺的能量传递。分析了能量传递过程，探讨了在多孔二氧化硅中Gd³⁺→Eu³⁺的能量传递的机理，其机理主要为电偶极-电偶极相互作用。     

OH-terminated cyanopropyl silicones

Due to their high polarity and unique selectivity, cyanopropyl silicones are basic stationary phases for high resolution capillary gas chromatography. Different OH-terminated cyanopropyl silicones, containing a high cyanopropyl content, were synthesized and chromatographically evaluated. Special attention was paid to the degree of immobilization of the phases in FSOT columns. Depending on the problem at hand, a choice has to be made between immobilization and maximum selectivity.     

负载型Au-Pd双金属催化剂的制备及其对CO氧化的催化活性

采用改性的等体积浸渍法制备了SiO2负载的Au-Pd双金属催化剂,考察了催化剂的焙烧温度对CO氧化反应活性的影响.与623,723和773K的条件下焙烧的催化剂相比,673K焙烧的催化剂具有良好的催化CO氧化活性,CO完全转化温度低于398K.应用N2物理吸附、X射线衍射、程序升温还原、CO程序升温脱附及X射线光电子能谱等技术对催化剂进行了表征.结果表明,673K焙烧的催化剂具有最大的比表面积和最小的孔径,存在Au0,Pd0和PdO相,AuxPdy合金相很少;而773K焙烧的催化剂上除了含有Au0,Pd0和PdO相外,还存在明显的AuxPdy合金相.具有大比表面积,小孔径,Au0,Pd0和PdO多相共存的催化剂可使CO的吸附量增加,催化活性提高;而AuxPdy合金相的生成并不能提高催化剂的催化活性.