航空发动机旋转叶片振动监测系统研究

介绍了叶尖定时测量旋转叶片的原理，设计的光纤柬式传感结合光电接收实现了高精度的弱光检测。基于“5＋2”传感器均布方案，利用双速率对叶片振动信号进行采样，通过“5＋2”处理算法实现了振动频率的准确辨识，并在某航空设备上进行了高速模拟转子实验，实验表明测得频率与应变仪结果一致。     

Enhanced nonlinearity in photonic crystal fiber by germanium doping in the core region

Germanium doping in silica can be used as a method for nonlinearity enhancement.Properties of the enhanced nonlinearity in photonic crystal fiber(PCF)with a GeO2-doped core are investigated theoretically by using all-vector finite element method.Numerical result shows that the nonlinear coefficient of PCF is greatly enhanced with increasing doping concentration,furthermore,optimal radius of the doped region should be considered for the desired operating wavelength.     

Atom waveguide and 1D optical lattice using a two-color evanescent light field around an optical micro/nano-fiber

We propose a two-color scheme of atom waveguides and one-dimensional （1D） optical lattices using evanescent wave fields of different transverse modes around an optical micro/nano-fiber. The atom guide potential can be produced when the optical fiber carries a red-detuned light with TE01 mode and a blue-detuned light with HEll mode, and the 1D optical lattice potential can be produced when the red-detuned light is transformed to the superposition of the TE01 mode and HE11 mode. The two trapping potentials can be transformed to each other for accurately controlling mode transformation for the red-detuned light. This might provide a new approach to realize flexible transition between the guiding and trapping states of atoms.     

Soliton squeezing generated in an all-fiber contiguration

We experimentally demonstrate amplitude squeezed soliton utilizing intensity-dependent self-phase modulation in an asymmetric Sagnac interferometer.The system.whose components are connected via ferrule connector/physical connection(FC/PC)fiber connectors,constitutes all-fiber configuration to generate squeezed soliton.Soliton amplitude reduction measured by homodyne detection is near 4.0 dB below the shot-noise level.Optimal squeezing fields in both simple and compact all-fiber configuration are obtained.     

光纤弯曲损耗特性的理论与实验研究

为了减小在长距离光纤通信中存在的弯曲损耗和利用光纤激光器中的弯曲损耗获得单模输出，利用速度法解释了光纤弯曲损耗机制，采用Marcuse理论研究了弯曲损耗随弯曲半径、波长和纤芯半径变化的关系。通过计算机仿真和实验得出弯曲损耗随弯曲半径的减小而增大，随波长的增大而增大，随纤芯半径的增大而增大，高阶模式的损耗大于低阶模式。利用这一结论就可以通过控制弯曲半径在临界半径以内来减小通信中的弯曲损耗，通过增大模场半径来实现光纤激光器中的单模输出。     

分布式拉曼光纤放大器动态增益控制研究

介绍了动态增益控制的必要性，对动态拉曼传输方程进行了简化，并将其以矩阵形式表示，从而减少了方程的数量，提高了计算速度。由拉曼传输耦合方程推出一种适用于分布式拉曼放大器实时控制的自动控制算法。考虑工程需要，该算法忽略了噪声功率、泵浦间的受激拉曼效应，以及信号和泵浦间受激拉曼效应对泵浦功率的损耗。结果表明该算法能够达到快速抑制输入信号功率突变引起的输出功率／增益波动的目的。     

Er3+-doped phosphor-tellurite glass for broadband short-length Er3+-doped fiber amplifier

ErS+-doped phosphor-tellurite glass for broadband short-length Er3+-doped fiber amplifier (EDFA) is fabricated and characterized. The differential value (△T) of onset crystalline temperature (Tx) and glass transition temperature (Ts) is 206°C.     

Synchronization and coherent combining of two pulsed fiber lasers

We demonstrate a scalable architecture for coherent combining of pulsed fiber lasers.A new method for generating synchronous pulsed fiber lasers by direct phase modulation is proposed and investigated.It is shown that phase modulated mutually coupled laser array can be a steady synchronous pulsed fiber laser source.The synchronous pulsed fiber lasers are coherently combined with an invariable phase difference of π in adjacent lasers.Neither active phase control nor polarization control is taken in our experiment.     

Experimental study on generation of high energy few cycle pulses with hollow fiber filled with neon

25 fs pulses with energy up to 0.8 mJ from a multi-pass amplifier system have been spectrally broadened from 460 nm to 950 nm due to strong self-phase modulation (SPM) effect in a gas filled hollow fiber. Using a set of chirped mirrors, the ultra-broadband dispersion compensation was achieved, and the compressed pulses reached their transform limit. Under optimized conditions we achieved pulses with duration of 5.1 fs and with energy of 400 μJ, corresponding to the peak power up to 80 GW. Supported by the National Natural Science Foundation of China (Grant Nos. 60608003, 60490280, 60225005 and 60621063)     

1.55-μm non-anti-reflection-coated fiber grating laser for single-longitudinal mode operation

A 1.55-m fiber grating laser (FGL) was fabricated by optically packaging a non-anti-reflection (AR) coated Fabry–Perot (FP) laser to a lensed fiber grating. The FGL demonstrates a single-longitudinal mode operation with a side-mode suppression ratio (SMSR) of up to 40 dB. The SMSR oscillates and diminishes to <30 dB as the increase of injection current above 38 mA, and the tilt of the fiber approaches 5° away from the facet normal of the FP laser. We have performed numerical simulations on the single-longitudinal mode operation for the FGL. The SMSR for the FGL increases over 40 dB as the increase of the fiber grating reflectivity (R _g) above 0.7 with non-AR-coated FP laser facet. Our calculations also show that the strong current-dependent SMSR oscillation is from the mode selection by the fiber grating external cavity and the heating effect in the FP laser.