RS 232串口通信在PC机与单片机通信中的应用

在功能比较复杂的自动控制系统中,通常以工控机为上位机,单片机为下位机,RS 232串口通信是工控机和单片机之间信息传递的枢纽,采用MAX232实现TTL逻辑电平和RS 232电平之间的相互转换,如此连接,既可体现出单片机的灵活控制功能,又可发挥出PC机强大的计算和显示功能,有利于对现场信号的实时采集、处理和监控,确保了良好的人机界面的交互性。     

Correction of iron interface in the spectrophotometric flow injection catalytic determination of molybdenum in plants

Iron interference in the spectrophotometric catalytic determination of molybdenum based on the iodide-hydrogen peroxide reaction can be corrected by using sulphosalicylic acid as masking and color-forming reagent. The catalytic influence of iron ions is circumvented to the extent of about 90% and correction of any remaining iron ions is possible by monitoring the colored iron(III)-salicylate complex at 490 nm. In this way, iron is also determined. With the proposed system, molybdenum can be determined in plant and food digests within the 0–100 μg Mo 1⁻¹ range in the presence of up to 25 mg Fe 1⁻¹, at a sampling rate of about 50 determinations h⁻¹. The relative standard deviation of 10 consecutive measurements was estimated as < 2%. Results for samples were comparable with those obtained by graphite furnace atomic absorption spectrometry. In addition, recoveries within the range 94–100% were calculated.     

The Use of Buffers in the Determination of Fluoride by an Ion-Selective Electrode at Low Concentrations and in the Presence of Aluminum

Abstract

The influence of the composition of buffer solutions on fluoride analyses by the fluoride ion selective electrode was studied. Residual fluoride content of reagents was observed to restrict the use of some buffers and reagents in low-level work. The optimum pH for low-level fluoride determinations was found to be around 5, which can be maintained by a sodium acetate-acetic acid buffer. Of the complexing agents studied, citrate was observed to be the most efficient masking agent for aluminum, but this ability depended strongly on ligand concentration. Citrate was also effective in masking iron (III) and magnesium ions. Tris (hydroxymethyi) aminomethane showed a similar ability to complex aluminum at a pH around 8. However, at this pH the hydroxyde ion interferes in fluoride analysis below 0.1 ppm [fbar].     

Measuring nitrate concentration in wastewaters with high chloride content

The presence of chloride ions in wastewaters in concentrations above 50 mg/L poses interference in several methods used for the measurement of nitrate-nitrogen. The aim of this study was to characterise the reliability and costs of some commonly available methods for the analysis of nitrate concentration in landfill leachate which contains high chloride levels. To investigate the effect of chloride interference, several widely used methods [ion chromatography (IC), continuous flow analysis (CFA), the German standard method (DIN), cuvette test (CUV), standard addition method (SAM) and reflectometric test (REF)] were used to measure the nitrate concentration in synthetic solutions containing varying concentrations of chloride and nitrate-nitrogen. Nitrate recoveries of the various methods were found to decrease in the following rank order: CUV (>95%) > IC (>90%) > CFA (89%) > DIN (88%) > REF (70%) > SAM (<80%). In the second part of the study, the same methods were used to measure nitrate concentrations in samples of biologically nitrified landfill leachate with and without chloride elimination. For leachate samples without chloride elimination, CUV results were well correlated (linear regression) with IC results (slope = 1.02/R² = 0.99) but to lesser extents with results obtained by CFA (0.91/0.86), DIN (0.89/0.97) and REF (0.86/0.77), and not correlated with SAM (0.74/–1.3). The incurred measurement costs per sample (in Euros) for the methods were as follows: CFA (<0.1) < DIN (0.6) < REF (0.7) < SAM (3) < CUV (3.8) < IC (15). Cuvette tests are recommended as the method of choice due to their accuracy and lower cost than IC.     

X-ray standing waves and scanning electron microscopy — Energy dispersive X-ray emission spectroscopy study of gold nanoparticles

A systematic characterization of mono-disperse nanoparticles with nominal diameters of 25 nm, 46 nm, 73 nm, 100 nm, 115 nm, and 250 nm was performed using X-ray standing waves (XSW). The samples were prepared on Si-wafer pieces and analyzed at DELTA synchrotron facility at beamline BL8 under grazing incidence geometry of the primary radiation. Additionally, SEM-EDX inspections of single particles as well as population-density checks were conducted. Particles with smaller diameters were able be characterized by XSW while the larger ones were not completely covered by the interference field produced by the provided 15 keV monochromatic radiation of BL8. The results of the measurements were compared with those of numerical simulations. The extension of the interference field perpendicular to the Si-wafer reflector was determined to be 83 nm ± 4 nm.     

Facile Fabrication of PBS/CNTs Nanocomposite Foam for Electromagnetic Interference Shielding

In order to reduce the pollutants of environment and electromagnetic waves, environment friendly polymer foams with outstanding electromagnetic interference shielding are imminently required. In this paper, a kind of electromagnetic shielding, biodegradable nanocomposite foam was fabricated by blending poly (butylene succinate) (PBS) with carbon nanotubes (CNTs) followed by foaming with supercritical CO₂. The crystallization temperature and melting temperature of PBS/CNTs nanocomposites with 4 wt % of CNTs increased remarkably by 6 °C and 3.1 °C compared with that of pure PBS and a double crystal melting peak of various PBS samples appeared in DSC curves. Increasing the CNT content from 0 to 4 wt % leads to an increase of approximately 3 orders of magnitude in storage modulus and nearly 9 orders of magnitude in enhancement of electrical properties. Furthermore, CNTs endowed PBS nanocomposite foam with adjustable electromagnetic interference (EMI) shielding property, giving a specific EMI shielding effectiveness of 28.5 dB cm³/g. This study provides a promising methodology for preparing biodegradable, lightweight PBS/CNTs foam with outstanding electromagnetic shielding properties.     

Microstructure of Gel-Glasses in the SiO2-Nd2O3 System

The microstructure of thermally treated neodymium containing silica gels is investigated by transmission electron microscopy and electron diffraction. Microheterogeneities with amorphous nature are found. Information for the short range order is obtained by the Radial Distribution Functions: SiO₄ tetrahedra and NdO₆ groups are formed and transition from four-fold to six-fold ring structure is observed with increasing of the heat treatment temperature.     

Comparison of procedures for correction of matrix interferences in the multi-element analysis of soils by ICP-AES with a CCD detection system

Three procedures, matrix matching, plasma optimisation and single-point standard-addition, have been evaluated to ascertain the best procedure for simultaneous multi-element analysis of industrial soils by ICP-AES with CCD detection. A standard reference material, CRM143 from the Bureau Communautaire de Réference (BCR), has been analysed for Cd, Cr, Cu, Mn, Ni and Pb using the three different matrix interference correction procedures. All three procedures give comparable results which are in good agreement with the BCR values, except for Cr. The single-point standard addition procedure was chosen, on the basis of economy and ease of implementation, to correct for matrix interferences in the determination of Cd, Co, Cr, Cu, Mn, Mo, Ni, Pb, Sn and V in soil samples collected from an industrial site in England. Concentrations of some of the elements were found to vary greatly with sampling depth. For example, the concentration of Mn, determined using the atomic line at 279.920 nm, increased from 426 ± 3 g/g at a depth of 18–28 cm to 5996 ± 144 g/g at 60–85 cm.     

Palatability Enhancement Potential of Hermetia illucens Larvae Protein Hydrolysate in Litopenaeus vannamei Diets

Marine feed ingredients derived from cephalopods (e.g., squid) and crustaceans (e.g., krill) are commercially used to improve the palatability of shrimp diets. Increase in global demand for shrimps has resulted in overfishing of these marine organisms and is a matter of concern. Insect protein hydrolysate could be a sustainable alternative for the possible replacement of these marine feed ingredients. During this study, four formulations: diet A (control: not containing any palatability enhancer), diet B (containing squid meal and krill oil), diet C (containing 1% insect protein hydrolysate), and diet D (containing 2% insect protein hydrolysate) were tested for (1) time required by first subject to begin feeding (time to strike) and (2) palatability in Litopenaeus vannamei. Additionally, the chemical composition of all four diet formulations was also analyzed. Results indicate that all diets had similar crude composition. The major essential amino acids in all diets were leucine and lysine, whereas eicosapentaenoic acid was the major omega-3 fatty acid in all diets. There were no significant differences between the mean time to strike for all the tested formulations. Palatability of tested formulations was found in the following order: diet D > diet C > diet B = diet A (p < 0.05), indicating that addition of squid meal and krill oil has no effect on palatability in comparison to control, whereas inclusion of insect protein hydrolysates significantly improves the palatability of formulations. Palatability enhancement potential of insect protein hydrolysate could be attributed to the high free amino acid content and water solubility in comparison to squid meal.     

Adaptive neuro-fuzzy interference system modelling for chlorpyrifos removal with walnut shell biochar

Accumulation of chlorpyrifos (CP), a pesticide, causes a significant environmental problem in food, surface/ground waters further to human health. The removal of the CP pollutant in surface/wastewater could be achieved by biochar due to the improved physical and chemical properties. In this work, the CP removal capacities of biochar samples derived from walnut shells at various temperatures from 450 to 900 °C were investigated. The experiments were performed as laboratory batch type study and the adsorption efficiency was determined at various conditions such as adsorbent dosage (10–500 mg/L), sorbate concentrations (100–1500 µg/L), contact time (0–300 min), initial pH (3–10), and the number of recycle.By subtracting the pyrolysis temperature from 450 °C to 900 °C, the surface areas were found to increase from 12.9 m²/g to 353.3 m²/g, respectively.The 143 experimental data were evaluated by a pair of kinetics and isotherm models and the Adaptive Neural Fuzzy Inference System (ANFIS). The developed ANFIS model was 98.56% successful in predicting the CP removal efficiency depending on the adsorption conditions. Walnut Shell Biochar (WSBC) can be applied for CP adsorption with 86.64% removal efficiency under optimum adsorption conditions (adsorbent = 250 µg/L, sorbate = 1000 µg/L, pH = 7.07 and contact time 15 min) thanks to its improved porosity. It was determined that the biochar samples could be reused 5 times. Equilibrium adsorption was observed to conform to the Langmuir isotherm, and the maximum adsorption capacity for WSBC@900 was 3.536 mg/g.