前驱体水解对纳米铂形状控制合成的影响

以聚丙烯酸钠(NaPA: M_w ≈ 2100)为保护剂，对比研究了H_2还原K_2PtCl_4 和K_2PtCl_6水溶液制备纳米铂晶粒的形状选择性，揭示了前驱体的水解对纳米铂 晶粒的形状控制合成具有显著影响。文献中通常采用的合成立方形状纳米铂的 K_2PtCl_4前驱体在水溶液中不稳定，避光静置一周会析出黑色沉淀。这种不稳定 性导致了以K_2PtCl_4为Pt前驱体的合成结果难以重复。相比而言，避光静墨的 K_2PtCl_6水溶液很稳定，以它为前驱体合成的纳米铂通常为削角八面体。 K_2PtCl_6水溶液暴露于室内光线中会出现[PtCl_6]~(-2)的光致水解。当[PtCl_6] ~(2-)的紫外特征吸收峰(260nm)由于光致水解完全消失后，以聚丙烯酸钠为保护剂 ，通过H_2还原可以有选择性地(约80%)合成由{100}晶面包裹的立方体形状的纳米 铂。     

盐酸丙咪嗪-人血清白蛋白结合作用的毛细管区带电泳测定法

采用毛细管区带电泳(CZE)技术,研究了抗抑郁三环类碱性药物盐酸丙咪嗪与人血清白蛋白(HSA)的结合作用。通过经典方法(超滤法)对该方法进行了方法学确证。该法适宜于水溶性良好的碱性药物(迁移时间足够短,且与蛋白质形成的复合物较稳定)-蛋白系统中分子间相互作用的定量考察。应用SAS 统计软件中非线性回归分析平台自编程序,求得了丙咪嗪与HSA的结合常数和结合位点数:K=0.18 L/μmol;n=2.2。 实验证明:该法可靠、简单、高效、低耗。     

水-表面活性剂比对微乳液法制备磁性Ni-Fe复合纳米微粒的影响

Ni-Fe复合物纳米粒;磁学参数;水-表面活性剂比对微乳液法制备磁性Ni-Fe复合纳米微粒的影响     

A method for correcting the contact angle from the θ/2 method

The θ/2 method, a widely used technique on measuring the contact angle of a sessile drop, assumes that the drop profile is part of a sphere. However, the shape profile of a sessile drop is governed by the Young–Laplace equation and is different from a sphere, especially for drops with a large bound number (e.g. large volume or small surface tension). The spherical assumption, therefore, causes errors on evaluating the contact angles. The deviation of contact angle from the θ/2 method is evaluated from a theoretical calculation in this work. A simple means is given for correcting the measurement error. The corrected angle results from the drop volume, surface tension, liquid density and the contact angle from θ/2 method. An algorithm for finding the correct contact angle without knowing the density and surface tension is also given. At the end, two examples of pendant drops are given for the illustration.     

Propagator matrices as matrices of power''s series. II. It''s relationship with HF''s stability problem and alternative solutions

Some non-singlet quasi-instabilities (QIs) cases that arise in the calculation of NMR-J parameters are analyzed within response theory. The relationship between ‘very close to zero’ eigenvalues of the principal propagator and the rate of convergency for specific coupling pathways is shown by a power series implemented to calculate the principal propagator matrix. A natural criterion for the analysis of the stability problem emerges from that series. This is more general and accurate compared with previous proposals. Its relationship with π-type molecular orbitals is given. We present an alternative scheme to minimize the effects of non-singlet QIs in such a way that the NMR-J parameters become close to the best theoretical calculations for H₂CX (X=CH₂, NH and O).     

Lignin,a biomass crosslinker,in a shape memory polycaprolactone network

This work reports a new direction of natural lignin valorization, which utilizes lignin to produce crosslinked polycaprolactone (PCL) via a straightforward synthesis. Lignin's hydroxyl groups of its multibranched phenolic structure allow lignin to serve as crosslinkers, whereas the aromatic groups serve as hard segments. The modified natural lignin containing alkene terminals is crosslinked with a thiol‐terminal PCL via Ru‐catalyzed photoredox thiol‐ene reaction. The high rate of gel contents measured for all crosslinked polymers, with the least being 84% of gel content, indicates efficient crosslinking. The prepared flat rectangular shape lignin‐crosslinked PCL sample demonstrates rapid thermal responsive shape memory behavior at 10 °C and 80 °C showing interconversion between a permanent and temporary shape. The melting temperature of the lignin‐crosslinked PCL is tunable by varying the percent weight of lignin. The 11, 21, and 30 wt % lignin demonstrated T_m of 42 °C, 35 °C, and 26 °C, respectively. The role of lignin as a crosslinker presented in this work suggests that lignin can serve as an efficient biomass‐based functional additive to polymers. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 2121–2130     

Directional Self‐Assembly of Fluorinated Star Block Polymer Thin Films Using Mixed Solvent Vapor Annealing

We demonstrate the directional alignment of perpendicular‐lamellae domains in fluorinated three‐armed star block polymer (BP) thin films using solvent vapor annealing with shear stress. The control of orientation and alignment was accomplished without any substrate surface modification. Additionally, three‐armed star poly(methyl methacrylate‐block‐styrene) [PMMA‐PS] and poly(octafluoropentyl methacrylate‐block‐styrene) were compared to their linear analogues to examine the impact of fluorine content and star architecture on self‐assembled BP feature sizes and interdomain density profiles. X‐ray reflectometry results indicated that the star BP molecular architecture increased the effective polymer segregation strength and could possibly facilitate reduced polymer domain spacings, which are useful in next‐generation nanolithographic applications. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1663–1672     

A New Class of Lanthanide Complexes with Three Ligand Centered Radicals: NMR Evaluation of Ligand Field Energy Splitting and Magnetic Coupling

Combination of three radical anionic Ph-BIAN ligands (Ph-BIAN=bis-(phenylimino)-acenaphthenequinone) with lanthanoid ions leads to a series of homoleptic, six-coordinate complexes of the type Ln(Ph-BIAN)₃. Magnetic coupling data were measured by paramagnetic solution NMR spectroscopy. Combining ¹H NMR with ²H NMR of partially deuterated compounds allowed a detailed study of the magnetic susceptibility anisotropies over a large temperature range. The observed chemical shifts were separated into ligand- and metal-centered contributions by comparison with the Y analogue (diamagnetic at the metal). The metal-centered contributions of the complexes with the paramagnetic ions could then be separated into pseudocontact and Fermi contact shifts. The latter is large within the Ph-BIAN scaffold, which shows that magnetic coupling is significant between the lanthanide ion and the radical ligand. Pseudocontact shifts were further correlated to structural data obtained from X-ray diffraction experiments. Ligand-field parameters were determined by fitting the temperature dependence of the observed magnetic susceptibility anisotropies. The electronic structure determined by this approach shows, that the Er and Tm analogues are candidates for single molecule magnets (SMM). These results demonstrate the possibilities for the application of NMR spectroscopy in investigations of paramagnetic systems in general and single molecule magnets in particular.     

Topological and thermodynamic investigations of binary mixtures: Molar excess volumes, molar excess enthalpies and isentropic compressibility changes of mixing

Molar excess volumes, V^E, molar excess enthalpies, H^E, and speeds of sound, u, of o-toluidine (i) + cyclohexane or n-hexane or n-heptane (j) binary mixtures have been determined over entire range of composition at 308.15 K. Speeds of sound data have been utilized to predict isentropic compressibility changes of mixing, of (i + j) mixtures. The observed V^E, H^E and data have been analyzed in terms of Graph theory. The analysis of V^E data by Graph theory reveals that o-toluidine exists as an associated molecular entity and (i + j) mixtures contain 1:1 molecular complex. It has been observed that V^E, H^E and values calculated by Graph theory compare well with their corresponding experimental values. The observed data have also been analyzed in term of Flory theory.