Simultaneous quantitative measurement of a new platelet activating factor antagonist (BN 50730) and its two main metabolites in human plasma and urine by LC-MS

Summary A simple and sensitive assay has been developed for the quantitative measurement of a new platelet activating factor antagonist (BN50730), and its two main metabolites (BN50727 and BN50922), at the picomole level in human plasma and urine. The three compounds of interest and the internal standard (BN50765) were measured by combined LC-negative chemical ionization MS. A simple solid-liquid extraction procedure was used to isolate the parent drug and the two metabolites. The MS was tuned to monitor the intense ionm/z 333 generated in the ion source by a dissociative capture process. The assay was on 1 ml plasma or 0.1 ml urine and the quantitation limit was calculated as 1 ng·ml^–1. The very low relative standard deviations and mean percentages of error calculated for within-day or between-day repeatability assays demonstrate the ruggedness of the technique for routine determination in biological fluids. Some preliminary results on the pharmacokinetics of the parent drug and its two main metabolites illustrate the applicability of this method.     

Interface interactions in modulated phases,and upsilon points

Certain features in Frenkel-Kontorova and other models of phases with a one-dimensional modulation can be analyzed by assuming parallel interfaces separating sets of lattice planes belonging to two different phases, and treating the free energy to create interfaces, as well as the interaction of two, three, or more interfaces, as phenomenological parameters. A strategy employed by Fisher and Szpilka for interacting defects can be extended to the case of interfaces, allowing a systematic study of the phase diagram by ignoring all interface interactions, and then successively taking into account pair, triple, and higher-order terms. The possible phase diagrams which can occur near the point where =0 include: various sorts of endpoints analogous to critical endpoints, an accumulation point of first-order transitions and triple points, and a self-similar structure which we call an upsilon point, which turns out to be an accumulation point of an infinite number of segments of first-order transition lines, each of which terminates in two upsilon points.     

Microstructural and physicochemical study of the buried Fe/AlGaAs(100) interface by transmission electron microscopy and x‐ray emission spectroscopy

Among the magnetic metal/semiconductor contacts, the Fe/GaAs system has been widely studied owing to its potential applications in electronic devices. In contrast, there are not many studies concerning the Fe/Al_xGa_1?xAs contact, and in particular there are no reports concerning the changes induced in the interfacial zone by the presence of Al. In this work, thin polycrystalline iron films were deposited by ion beam sputtering at room temperature on a 300 nm thick Al_0.25Ga_0.75As layer grown by molecular beam epitaxy onto GaAs(001). X‐ray diffraction analysis showed that the iron films are polycrystalline, and indications of a (002) texture of the film were observed. The fine scale analysis of the interface was achieved by high‐resolution transmission electron microscopy (HRTEM) observations, the results of which are compared with the physicochemical information obtained from electron‐induced x‐ray emission spectroscopy, by analysing the Al 3p valence states at the Fe/Al_xGa_1?xAs interface. The HRTEM experiments on cross‐section samples indicate that the interfacial zone between iron and AlGaAs is limited to <1.5 nm in thickness. X‐ray emission spectroscopy showed the presence of Al atoms in an FeAl‐like environment at the interface, and the existence of wrong bonds and point defects. The estimated width of the perturbed interface (2.0 ± 0.5 nm) is in agreement with the HRTEM results. Copyright © 2003 John Wiley & Sons, Ltd.     

Adsorption at liquid interfaces: The generalized Frumkin isotherm and interfacial structure

The thermodynamics of adsorption of amphiphilic surface-active compounds at the interface between two immiscible liquids is considered. At the interface, these molecules are supposed to replace a few of the adsorbed molecules of both solvents. Classical isotherms of adsorption (Frumkin, Frumkin-Damaskin, Langmuir, Henry) were based on the model of non-penetrable interface, where an adsorbate can substitute only molecules of one solvent. At the interface between two immiscible electrolytes, nonpolar oil/water interfaces, and liquid membranes amphiphilic molecules can substitute molecules of both solvent and classic isotherms cannot be used. The generalization of Frumkin isotherm for permeable and non-permeable interfaces, known as the Markin-Volkov isotherm, gives the possibility to analyze adsorption in a general case. The adsorption isotherms of pentafluorobenzoic acid at the octane/water interface at different pHs were measured by the drop-weight method. The thermodynamic parameters of pentafluorobenzoic acid (PFBA) adsorption at octane/water interface were determined. From the measurements of PFBA adsorption, the structure of the octane/water interface was determined. Substitution of one adsorbed octane molecule requires approximately three adsorbed PFBA molecules. This result shows that the orientation of solvent molecules at the interface is different from the bulk. Adsorbed octane molecules have a lateral orientation with respect to the interface. Gibbs free energy of adsorption equilibrium and thermodynamic parameters of PFBA adsorption show that the adsorption of PFBA at the octane/water interface is accompanied by a reduction in the attraction between adsorbed PFBA molecules as the pH decreases to the acidic region. Published in Russian in Elektrokhimiya, 2006, Vol. 42, No. 10, pp. 1194–1200. The text was submitted by the authors in English.     

PREPARATION OF PERFLUOROOCTANOYL-MODIFIED POLY(VINYL-ALCOHOL)S AND THEIR ADSORPTION AT AN AIR-WATER INTERFACE

Perfluorooctanoyl modified poly(vinyl alcohol)s (FPVA) were prepared by means of substituting a small amountof hydroxyl groups on the backbone of poly(vinyl alcohol), for which the initial degree of polymerization is equal to 1750.The substitution extent, defined by the number of substituting units in a chain, for the four FPVA samples was in the range of0.5-5 perfluorooctanoyl groups per chain. The FPVA samples with the highest substitution extent still had good solubility inwater. It was shown by experimental measurement at 30.0±0.1℃ that the surface tension of the aqueous solution of thehighest substituted FPVA decreased to 16.6 mN/In at a higher concentration, e.g about 0.1 g/mL. Obviously,macromolecules of FPVA exhibit a very strong tendency to adsorb at the air-water interface, because the hydrophobicperfluorooctanoyl groups in FPVA have a very high surface activity as they are in small molecular fluorinated surfactants.The chain conformation of such a model polymer adsorbed on the air-water interface was also discussed.     

激光加工设备的通讯技术分析

通讯技术实际上是设备与设备之间的互通互联.随着信息化的发展,利用高科技产物--以激光为能源的设备已经产生并逐渐成熟.传统的激光设备通讯方式主要采用并行接口,而随着技术的增强,新的通讯技术得到了广泛应用.本文结合激光设备的特点,对几种常见通讯接口技术加以阐述.     

多位LED串行显示电路设计与应用

74HC595A芯片具有串行输入、并行输出功能,利用该集成电路可设计多位LED(发光二极管)串行显示电路。文中介绍了利用该芯片设计的12位LED串行显示电路,详细说明了该电路的工作原理及编程思路,并给出了参考程序。该电路只占用单片机3根口线,较并行显示方式极大地节省了系统资源,已在实际系统中得到应用。     

Study of NiSi/Si Interface by Cross-Section Transmission Electron Microscopy

采用不同硅化工艺制备了NiSi薄膜并用剖面透射电镜(XTEM)对样品的NiSi/Si界面进行了研究.在未掺杂和掺杂(包括As和B)的硅衬底上通过物理溅射淀积Ni薄膜,经快速热处理过程(RTP)完成硅化反应.X射线衍射和喇曼散射谱分析表明在各种样品中都形成了NiSi.还研究了硅衬底掺杂和退火过程对NiSi/Si界面的影响.研究表明:使用一步RTP形成NiSi的硅化工艺,在未掺杂和掺As的硅衬底上,NiSi/Si界面较粗糙;而使用两步RTP形成NiSi所对应的NiSi/Si界面要比一步RTP的平坦得多.高分辨率XTEM分析表明,在所有样品中都形成了沿衬底硅〈111〉方向的轴延-NiSi薄膜中的一些特定晶面与衬底硅中的(111)面对准生长.同时讨论了轴延中的晶面失配问题.     

Formation of PdNiZn thin film at oil‐water interface: XPS study and application as Suzuki‐Miyaura catalyst

Nanosheet of PdNiZn and nanosphere of PdNiZn/reduced‐graphene oxide (RGO) with sub‐3 nm spheres have been successfully synthesized through a facile oil‐water interfacial strategy. The morphology and composition of the films were determined by X‐ray diffraction (XRD), X‐ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), scanning electron microscopy (SEM), energy dispersive analysis of X‐ray (EDAX) and elemental mapping. In the present study, we have developed a method to minimize the usage of precious Pd element. Due to the special structure and intermetallic synergies, the PdNiZn and PdNiZn/RGO nanoalloys exhibited enhanced catalytic activity and durability relative to Pd nanoparticles in Suzuki‐Miyaura C‐C cross‐coupling reaction. Compared to classical cross‐coupling reactions, this method has the advantages of a green solvent, short reaction times, low catalyst loading, high yields and reusability of the catalysts.     

SINGLE AND DOUBLE EDGE INTERFACE CRACK SOLUTIONS FOR ARBITRARY FORMS OF MATERIAL COMBINATION

In this paper interfacial edge crack problems are considered by the application of the finite element method. The stress intensity factors are accurately determined from the ratio of crack-tip-stress value between the target given unknown and reference problems. The reference problem is chosen to produce the singular stress fields proportional to those of the given unknown problem. Here the original proportional method is improved through utilizing very refined meshes and post-processing technique of linear extrapolation. The results for a double-edge interface crack in a bonded strip are newly obtained and compared with those of a single-edge interface crack for different forms of combination of material. It is found that the stress intensity factors should be compared in the three different zones of relative crack lengths. Different from the case of a cracked homogeneous strip, the results for the double edge interface cracks are found to possibly be bigger than those for a single edge interface crack under the same relative crack length.