Tunable UV generation at 283 nm by frequency doubling and sum frequency mixing of two semiconductor lasers for the detection of Pb

High resolution atomic absorption measurements of lead at 283 nm in a vapor cell were performed by frequency doubling an 850 nm laser diode to obtain 425 nm light, followed by sum frequency generation of the harmonic radiation with a second 850 nm laser diode.     

Ab initio study of exciton transfer dynamics from a core–shell semiconductor quantum dot to a porphyrin-sensitizer

The observed resonance energy transfer in nanoassemblies of CdSe/ZnS quantum dots and pyridyl-substituted free-base porphyrin molecules [Zenkevich et al., J. Phys. Chem. B 109 (2005) 8679] is studied computationally by ab initio electronic structure and quantum dynamics approaches. The system harvests light in a broad energy range and can transfer the excitation from the dot through the porphyrin to oxygen, generating singlet oxygen for medical applications. The geometric structure, electronic energies, and transition dipole moments are derived by density functional theory and are utilized for calculating the Förster coupling between the excitons residing on the quantum dot and the porphyrin. The direction and rate of the irreversible exciton transfer is determined by the initial photoexcitation of the dot, the dot–porphyrin coupling and the interaction to the electronic subsystem with the vibrational environment. The simulated electronic structure and dynamics are in good agreement with the experimental data and provide real-time atomistic details of the energy transfer mechanism.     

Polyether azomethines. I. Synthesis and characterization

Six new polyether azomethines were synthesized by melt and solution polycondensation of six different diamines with 4,4′-[1,4-phenylene bis(oxy)] bisbenzaldehyde. The polymers synthesized by solution method are yellow to white in color and had inherent viscosities up to 0.59 dL/g in concentrated H₂SO₄. The polymers obtained by melt condensation show higher viscosity. Except polymer IV , others are insoluble in common organic solvents. The polymers were characterized by IR, x-ray, elemental analysis, and DSC study. The thermal stability of the polymers was evaluated by TGA and IGA study. Polymers I-III are highly thermally and thermooxidatively stable and exhibit no appreciable decomposition up to 420°C both in air and nitrogen atmosphere. It was shown that the curing of the polyazo-methines takes place by opening up of the ? CH?N? linkages at higher temperature. The electrical conductivities of the virgin and iodine doped polymers were as high as 10^?11?10^?16 and 10^?6?10^?8S cm^?1, respectively, at 30°C. Electronic spectra of the undoped polymers ( I-III ) indicated a large bathochromic shift of the ? – ?^* absorptions band (376 nm) due to ? C?N? bonds of the model compound. This can be attributed to extensive delocalization of the electrons along the polymer chain. © 1995 John Wiley & Sons, Inc.     

Thermodynamics of Binary and Ternary Copper-, Cadmium,and Indium-Containing Semiconducting Phases: An Electrochemical Study

Optimum compositions of ion-selective membranes in quasi-binary systems CuCl-CdCl₂, LiCl-CdCl₂, and In₂S₃-InCl₃ are selected by a method of coulometric titration in cells with solid electrolytes. Transport numbers for ions are close to unity for the optimum compositions; transport numbers for electrons are vanishingly small ( ≺10⁻³ to 10⁻⁴); the electroconductivity is equal to ≈ 10⁻³ S cm⁻¹ at 200°C; the diffusion coefficients for the current-producing component are on the order of 10⁻⁶ to 10⁻⁷ cm² s⁻¹. When using a solid electrolyte of the composition CuCl-CdCl₂, which contains 30 mol % CdCl₂, methods of emf and electroconduction reveal that the region of homogeneity of copper(I) selenide falls in the region of compositions Cu_1.33Se-Cu_2.67Se.__________Translated from Elektrokhimiya, Vol. 41, No. 6, 2005, pp. 721–727.Original Russian Text Copyright © 2005 by Leushina, Kolesnikova, Makhanova, Zlomanov.Published on the basis of a report delivered at the VII Meeting on Fundamental Problems in Solid-State Ionics (Chernogolovka-2004).     

Quantum Size Effects in the Photonics of Semiconductor Nanoparticles

The appearance of quantum size effects in ultradisperse semiconductors, their quantitative analysis, and their effect on the absorption of light and on the photophysical (vibrational relaxation of photogenerated “hot” charge carriers, band-band and “defect” luminescence) and certain primary photochemical processes (the accumulation of excess negative charge by the semiconductor nanoparticles, interphase electron transfer, etc.) are discussed.__________Translated from Teoreticheskaya i Eksperimental’naya Khimiya, Vol. 41, No. 2, pp. 67–87, March–April, 2005.     

Enhancement of signal-to-noise level by synchronized dual wavelength modulation for light emitting diode fluorimetry in a liquid-core-waveguide microfluidic capillary electrophoresis system

The signal-to-noise level of light emitting diode (LED) fluorimetry using a liquid-core-waveguide (LCW)-based microfluidic capillary electrophoresis system was significantly enhanced using a synchronized dual wavelength modulation (SDWM) approach. A blue LED was used as excitation source and a red LED as reference source for background-noise compensation in a microfluidic capillary electrophoresis (CE) system. A Teflon AF-coated silica capillary served as both the separation channel and LCW for light transfer, and blue and red LEDs were used as excitation and reference sources, respectively, both radially illuminating the detection point of the separation channel. The two LEDs were synchronously modulated at the same frequency, but with 180°-phase shift, alternatingly driven by a same constant current source. The LCW transferred the fluorescence emission, as well as the excitation and reference lights that strayed through the optical system to a photomultiplier tube; a lock-in amplifier demodulated the combined signal, significantly reducing its noise level. To test the system, fluorescein isothiocyanate (FITC)-labeled amino acids were separated by capillary electrophoresis and detected by SDWM and single wavelength modulation, respectively. Five-fold improvement in S/N ratio was achieved by dual wavelength modulation, compared with single wavelength modulation; and over 100-fold improvement in S/N ratio was achieved compared with a similar LCW-CE system reported previously using non-modulated LED excitation. A detection limit (S/N = 3) of 10 nM FITC-labeled arginine was obtained in this work. The effects of modulation frequency on S/N level and on the rejection of noise caused by LED-driver current and detector were also studied.     

Integrated chemical sensor array platform based on a light emitting diode, xerogel-derived sensor elements, and high-speed pin printing

We report a new, solid-state, integrated optical array sensor platform. By using pin printing technology in concert with sol-gel-processing methods, we form discrete xerogel-based microsensor elements that are on the order of 100 μm in diameter and 1 μm thick directly on the face of a light emitting diode (LED). The LED serves as the light source to excite chemically responsive luminophores sequestered within the doped xerogel microsensors and the analyte-dependent emission from within the doped xerogel is detected with a charge coupled device (CCD). We overcome the problem of background illumination from the LED reaching the CCD and the associated biasing that results by coating the LED first with a thin layer of blue paint. The thin paint layer serves as an optical filter, knocking out the LEDs red-edge spectral tail. The problem of the spatially-dependent fluence across the LED face is solved entirely by performing ratiometric measurements. We illustrate the performance of the new sensor scheme by forming an array of 100 discrete O₂-responsive sensing elements on the face of a single LED. The combination of pin printing with an integrated sensor and light source platform results in a rapid method of forming (∼1 s per sensor element) reusable sensor arrays. The entire sensor array can be calibrated using just one sensor element. Array-to-array reproducibly is <8%. Arrays can be formed using single or multiple pins with indistinguishable analytical performance.     

环状芴基张力半导体拉曼光谱理论与实验研究

环状芴基张力半导体由于其特殊的分子结构，发射状排布的p轨道和纳米级空腔等诸多特点，引起了科学家广泛的关注.相对于直链型芴基半导体，环状芴基张力半导体展现出独特的光电性质.然而，迄今为止其振动性质没有被报道.对四元环芴的晶体与直链四聚芴粉末样品进行拉曼光谱表征和归一化处理，并结合理论计算.结果表明，与直链寡聚芴相比，环芴类似于碳纳米管的G峰发生了偏移，并且低频区域拉曼频移峰的峰强增加.其原因是由于张力的引入，改变了芴基主链的骨架和电子结构，加强芴骨架上π电子离域，同时使环芴中每个芴单元都参与到振动中.该研究结果为芴基张力半导体材料拉曼光谱的研究提供了一定的工作基础.     

Green-synthesized,low-cost tetracyanodiazafluorene (TCAF) as electron injection material for organic light-emitting diodes

As facile,green,low-cost as possible:One more electron-deficient azaacene (TCAF) with deep LUMO (-4.52 eV), strong electronic affinity,excellent yield,and simple purification procedure was successfully created and explored as good electron injection material.It is believed TCAF would be a promising and pervasive acceptor material and bring in more significant achievements to green and sustainable organic electronics including OLEDs,OFETs,OPVs, and perovskite solar cells,etc.     

Multivariate analysis of non-homogeneous peaks in liquid chromatography

Summary The effects of concentration, separation and spectral similarity as factors influencing the accuracy of iterative target testing factor analysis (ITT-FA) are investigated for three component systems by the application of analysis of variance (ANOVAR). ANOVAR is applied over a range of peak separations to map the changing effects of the three factors with increasing overlap. Two error responses were measured and analysed, (a) Relative cluster error (RCE) a measure of the error over all peaks in a cluster and (b) Relative peak error (RPE) the error of an individual peak. Multicomponent analysis (MCA) a method requiringa priori spectral information, is used as a referee method for ITT-FA.