Molecular dynamics and phase transitions in phospholipid monolayers at liquid-liquid interfaces

Stablen-hexadecane/water andn-tetradecane/water macroemulsions containing monolayers of natural (egg yolk lecithin, EY) and synthetic (dimyristoylphosphatidylcholine, DMPC) phospholipids at liquid-liquid interfaces were prepared. The existence of the monolayers was proved by studying the reduction kinetics of a surface-active spin probe with ascorbate anions. Spin labeled derivatives of stearic acid in which the nitroxide group is locared at different distances from the polar head (5-, 12-, and 16-doxylstearic acids) were used to study the temperature dependences of the molecular ordering, rotational mobility, and local polarity in the monolayers in emulsions and also in bilayers in liposomes obtained from the same lipids. In the EY monolayers, the degree of spin probe solubilization is higher, while the order parameters (S) and rotational correlation times (τ) are lower than those in EY bilayers. The differences between these parameters for mono- and bilayers increase with an increase in the distance of the reporter group from the aqueous phase. In the DMPC monolayers, a first-order phase transition was detected by measuring the temperature dependences ofS and τ. The temperature region of the phase transition in monolayers is shifted to lower temperatures with respect to that for bilayers and depends on the nature of the oil phase. It was concluded that the phospholipid monolayers in emulsions incorporate hydrocarbon molecules, whose concentration in the DMPC monolayers increases on going from the low-temperature (gel) to the high-temperature (liquid crystal) phase. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 418–425, March, 1998.     

Chemistry of borate in salt lake brine (XXXIV)

The crystallization processes of hydrated Mg-borates, boric, magnesium hydroxide and Mg-oxychloride from MgO-B₂O₃-18%MgCl₂-H₂O supersaturated solution at 20°C have been studied by kinetic method. The crystallization solid phases were characterized by X-ray powder diffraction, IR spectra, thermal analysis and chemical analysis. The liquid-solid phase diagram of thermodynamic nonequilibrium state has been given. In this phase diagram, there exist eight crystallization fields, boric acid(H₃BO₃), trigomagneborite(MgO · 3B₂O₃ · 7.5H₂O, MgO · 3B₂O₃ · 7H₂O), hungchaoite(MgO · 2B₂O₃ · 9H₂O), inderite(2MgO · 3B₂O₃ · 15H₂O), chloropinnoite(2MgO · 2B₂O₃ · MgCl₂ · 14H₂O), magnesium hydroxide(Mg(OH)₂) and magnesium oxychloride (5Mg(OH)₂ · MgCl₂ · 8H₂O).     

Synthesis of conjugated polyrotaxanes

A series of conjugated polyrotaxane insulated molecular wires are synthesised by aqueous Suzuki polymerisation, using hydrophobic binding to promote threading of the cyclodextrin units. These polyrotaxanes have conjugated polymer cores based on poly(para-phenylene), polyfluorene, and poly(diphenylene-vinylene), threaded through 0.9-1.6 cyclodextrins per repeat unit. Bulky naphthalene-3,6-disulfonate endgroups prevent the macrocycles from slipping off the conjugated polymer chains. Dialysis experiments show that the cyclodextrins become unthreaded only if smaller stoppers are used. MALDI TOF mass spectra detect oligomers with up to ten threaded cyclodextrins, and reveal the presence of some defects that result for oxidative homo-coupling of boronic acids. Weight-average molecular weights were determined by analytical ultracentrifugation, demonstrating that step-growth polymerisation is efficient enough to achieve degrees of polymerisation up to approximately 20 repeat units (84 para-phenylenes). The fluorescence spectra of these polyrotaxanes indicate that the presence of the threaded cyclodextrin macrocycles reduces the flexibility of the conjugated polymer pi-systems. Both the solution and the solid-state photoluminescence quantum yields are enhanced upon threading of the conjugated polyaromatic cores through alpha- or beta-cyclodextrins, and the emission spectra of the polyrotaxanes are blue-shifted compared to the corresponding unthreaded polymers. The greater weight of the 0-0 transition in the emission spectra, as well as the smaller Stokes shift, indicate that the polyrotaxanes are more rigid than the unthreaded polymers.     

Speciation of selenium(IV) and selenium(VI) in environmental samples by the combination of graphite furnace atomic absorption spectrometric determination and solid phase extraction on Diaion HP-2MG

A simple solid phase extraction procedure for speciation of selenium(IV) and selenium(VI) in environmental samples has been proposed prior to graphite furnace atomic absorption spectrometry. The method is based on the solid phase extraction of the selenium(IV)-ammonium pyrrolidine dithiocarbamate (APDC) chelate on the Diaion HP-2MG. After reduction of Se(VI) by heating the samples in the microwave oven with 4 mol l⁻¹ HCl, the system was applied to the total selenium. Se(VI) was calculated as the difference between the total selenium content and Se(IV) content. The experimental parameters, pH, amounts of reagents, eluent type and sample volume were optimized. The recoveries of analytes were found greater than 95%. No appreciable matrix effects were observed. The adsorption capacity of sorbent was 5.20 mg g⁻¹ Se (IV). The detection limit of Se (IV) (3sigma, n = 11) is 0.010 μg l⁻¹. The preconcentration factor for the presented system was 100. The proposed method was applied to the speciation of selenium(IV), selenium(VI) and determination of total selenium in natural waters and microwave digested soil, garlic, onion, rice, wheat and hazelnut samples harvested various locations in Turkey with satisfactory results. In order to verify the accuracy of the method, certified reference materials (NIST SRM 2711 Montana Soil, NIST SRM 1568a Rice Flour and NIST SRM 8418 Wheat Gluten) were analyzed and the results obtained were in good agreement with the certified values. The relative errors and relative standard deviations were below 6 and 10%, respectively.     

Faster GC analyses performed by flow programming in short capillary columns

The technique of programming the carrier gas flow rate in gas chromatography, especially in connection with the use of capillary columns shorter than 10 m can significantly accelerate GC analyses. Equations for calculation of the parameters of the exponential flow function and retention data are described. The effects of flow programming in a short capillary column are shown in a few chromatograms. Different programming rates are tested and compared with temperature programming.     

Packings and stationary phases for biopolymer separations by HPLC

Summary Packings and stationary phases applied to high resolution separations of proteins, enzymes, and nucleic acids must satisfy a series of distinct criteria that are different from those usually required by HPLC of low molecular weight non-biologically active analytes. These requirements have been met through substantial improvements in classical gel media together with novel developments in silica supports, and have led to a family of products with tailor-made and reproducible properties. Supports consisting of cross-linked organic gels, and inorganic materials (mostly silicas) are now available with graduated particle sizes, pore sizes, porosities and surface areas as well as non-porous beads. A whole range of stationary phases, such as reversed phase, hydrophobic interaction, ion exchanger and affinity packings, were designed for application as chemical sensors for biopolymer recognition in adsorptive chromatography. The phase systems are operated in the gradient mode, giving high resolution and high peak capacities. In addition, aqueous liquid-liquid partitioning systems have been developed for the fractionation of proteins and nucleic acids. Size exclusion media complete the set of HPLC variants enabling a discrimination of proteins according to their size and shape in an isocratic elution mode. Basically, protein purification and isolation is a multistage process where-by the HPLC variants are combined in a logistic sequence, utilizing the different selectivities of the phase systems and thus maximising resolution, speed and throughput.     

N，N-二丁基癸酰胺萃取硝酸有机相结构研究

利用界面张力、电导、FT-IR等研究了不同硝酸浓度下萃取有机相的微结构。利用Gaussian曲线拟合处理N，N-二丁基癸酰胺(DBDEA)的羰基吸收峰，结果表明体系中存在多种以氢键结合的物种如DBDEA·HNO₃、(DBDEA)₂·HNO₃等。在较高酸度下有机相中萃取剂分子自组装成小的聚集体-反相胶团，极性核由水、硝酸和萃取剂高电荷密度的极性部分构成。     

Crystallite Nanosize Effect on the Structural Transitions of WO3 Studied by Raman Spectroscopy

Nanocrystallites of tungsten oxide samples of 2, 4, 16, 35 and 60 nm of diameter were prepared by cryosol and pyrosol techniques. The pressure- and temperature-induced phase transitions of these samples were monitored by Raman spectrometry from 0.1 MPa to 34 GPa and from 77 to 1200 K. The tetragonal (α)-orthorhombic (β)-monoclinic (γ) transitions in these nanometric samples are strongly downshifted in temperature by comparison with the bulk WO₃. For instance, the tetragonal phase which exists above 1171 K for the bulk tungsten oxide can be stabilized at 700 K for the 35 nm sample. In the same way, the monoclinic P2₁/n-monoclinic P2₁/c high-pressure-induced transition is slightly shifted from 0.1 GPa to a higher pressure (1.5 GPa). The discussion of these transition-line shifts is based on thermodynamic considerations in which the surface energy of crystallites plays an important role.