Gem-dinitro compounds in organic synthesis. 4. Use of the condensation product of glyoxal and dinitromethane in the synthesis of nitro-1,2,3-triazoles

The condensation of dinitromethane with glyoxal has been investigated and it has been demonstrated that 1,1,4,4-tetranitro-2,3-butandiol, -hydroxy-,-dinitropropionic acid or their mixture may be formed. Interaction of 1,1,4,4-tetranitro-2,3-butandiol or 1,4-dibromo-1,1,4,4-tetranitro-2,3-butanediol diacetates with sodium azide leads to bis(5-nitro-1,2,3-triazol-4-yl) via intermediate 1,1,4,4-tetranitro-1,3-butadiene.For communication 3, see [1].N. D. Zelinskii Institute of Organic Chemistry, Russian Academy of Sciences, 117913 Moscow. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 9, pp. 2123–2131, September, 1992.     

Strukturelle Abwandlungen anN-Acetylneuraminsäure, 3

From methyl-5-acetylamino-7,8-anhydro-4,9-O-bis-(t-butyldimethylsilyl)-3,5-dideoxy--D-glycero-D-galacto-2-nonulopyranosidonic acid methylester (1) the derivatives1 a and1 b were obtained by removing the 9-O-(t-butyldimethylsilyl)group withBu ₄NF, followed by acetylation. Treatment of1 b with 80% acetic acid and acetanhydride/pyridine yields the 8-epi-N-acetylneuraminic acid derivative2 a and the 7-epi-N-acetylneuraminic acid derivative3 a in a ratio of 3:1 (Scheme 1). The structure elucidation of2 b was achieved by converting2 b via the 4,9-bis-O-(tBDMSi)-8-O-tosyl-derivative2 d into the epoxide1 (Scheme 2). Using the same sequence the epoxides4 and5 were transformed into theN-acetylneuraminic acid derivative6 a and the 7,8-bis-epi-N-acetylneuraminic acid derivative7 a (Scheme 3). After treatment with sodium hydroxide and 0.025m HCl and Dowex 50 H⁺ the 8-epi-, 7-epi- and 7,8-bis-epi-N-acetylneuraminic acids2,3, and7 were obtained. These three compounds were tested withCMP-N-acetylneuraminic acid synthetase.

Herrn KollegenK. Schlögl mit den besten Wünschen zum 60. Geburtstag.     

Zur Bildung von Xylol-tricarbonylchrom (Dimethylbenchrotrenen) aus Di-n-butylether und Hexacarbonylchrom

The reaction of fluorenone ethyleneketal (9), diphenic anhydride as well as of biphenyls such as4 with Cr(CO)₆ in refluxing di-n-butylether (BE) gives dimethylbenchrotrenes [xylene-Cr(CO)₃,7] which are also formed by refluxing pureBE with Cr(CO)₆—although with much lower yields. Similarily, from di-n-pentylether and Cr(CO)₆ isobutyl- and 1-methyl-3-propyl-benchrotrene (13 and14) were obtained, whilst from di-n-propyl- and-hexylether, resp., and Cr(CO)₆ no benchrotrenes could be isolated.Tentative assumptions on the catalytic action of certain functional groups were confirmed by the reaction ofBE and Cr(CO)₆ in the presence of carbonamides, such as acetamide, urea and pyrrolidone, where 1,4-dimethylbenchrotrene (7 c) was formed with appreciable yields.Studies using dideuteratedBE showed that—at least for the reaction of9 with Cr(CO)₆ (giving a much lower yield of7 than with undeuteratedBE)—a simple bimolecular mechanism can be excluded.

     

BaCe0.8Ho0.2O3-a陶瓷的性质与应用

Ceramic BaCe0.8Ho0.2O3-α with orthorhombic perovskite structure was prepared by conventional solid state reaction, and its conductivity and ionic transport number were measured by ac impedance spectroscopy and gas concentration cell methods in the temperature range of 600-1000 ℃ in wet hydrogen and wet air, respectively. Using the ceramics as solid electrolyte and porous platinum as electrodes, the hydrogen-air fuel cell was constructed, and the cell performance at temperature from 600-1000 ℃ was examined. The results indicate that the specimen was a pure protonic conductor with the protonic transport number of 1 at temperature from 600-900 ℃ in wet hydrogen, a mixed conductor of proton and electron with the protonic transport number of 0.99 at 1000 ℃. The electronic conduction could be neglected in this case, thus the total conductivity in wet hydrogen was approximately regarded as protonic conductivity. In wet air, the specimen was a mixed conductor of proton, oxide ion and electron hole. The protonic transport numbers were 0.01-0.09, and the oxide-ionic transport numbers were 0.27-0.32. The oxide ionic conductivity was increased with the increase of temperature, but the protonic conductivity displayed a maximum at 900 ℃, due to the combined increase in mobility and depletion of the carriers. The fuel cell could work stably. At 1000 ℃, the maximum short-circuit current density and power output density were 346 mA/cm^2 and 80 mW/cm^2, respectively.     

Controllable growth of chains and grids from polyoxomolybdate building blocks linked by silver(I) dimers

Molecular growth processes utilizing a beta-octamolybdate synthon and {Ag2} dimers are described and the directing influence of "encapsulating" cations and coordinating solvent is also demonstrated. The growth of two 1D chains, (nBu4N)2n[Ag2Mo8O26]n (1) and (nBu4N)2n[Ag2Mo8O26(CH3CN)2]n (2), is achieved when nBu4N+ ions are used, and the diameter of the chains can be expanded by the coordination of CH3CN solvent (2). The formation of a type of gridlike structure in which 1D chains are crossed-over each other in alternatively packed layers is achieved in DMSO as the solvent; DMSO acts as a linking group to give (nBu4N)2n[Ag2Mo8O26(dmso)2]n (3), which, similar to 1 and 2, still incorporates the Bu4N+ ions that exert an "encapsulating" influence. However, in (HDMF)n[Ag3(Mo8O26)(dmf)4]n (4) the relatively bulky Bu4N+ ions are exchanged for protonated DMF cations, thereby allowing the chains to condense to a 2D array. The building block concept is further enforced by the isolation of a "monomeric" unit (Ph4P)2[Ag2Mo8O26(dmso)4] (5), which is isolated when the Ph4P+ ions are so "encapsulating" as to prevent aggregation of the {Ag-Mo8-Ag} building blocks. The nature of the AgAg dimers in each of the compounds 1-4 is examined by DFT calculations and the interplay between these Ag-Ag interactions and the structure types is described.     

Direct targeting of human plasma for matrix-assisted laser desorption/ionization and analysis of plasma proteins by time of flight-mass spectrometry

A method to analyze human plasma proteins without fractionation, directly applying a plasma-matrix mixture on the target plate of a matrix-assisted laser desorption/ionization-time of flight-mass spectrometer (MALDI-TOF-MS), has been described. Peaks of ionized plasma proteins could not be detected applying a mixture of an undiluted plasma sample and a matrix solution, but they appeared when the plasma was diluted before mixing with the matrix. Tenfold diluted plasma provided well-resolved protein peaks in the m/z range from 4000 to 30,000. The addition of a simple post-crystallization washing procedure performed on the target plate further improved the quality of mass spectra. We numbered 58 peaks in the range of 4-160 kDa and 32 out of which were assigned to the plasma protein species which have been reported. Especially high sensitivity and resolution were obtained in the region < 30 kDa, where multiple isoforms of apolipoprotein A-I, apolipoprotein A-II, apolipoprotein C-I, apolipoprotein C-II, apolipoprotein C-III, and transthyretin could be assigned. Various post-translational modifications are involved in the isoforms, e.g., proteolytic cleavage, glycosylation and chemical modifications. This method will become complementary with the present electrophoretic techniques, especially for the analysis of low-molecular-mass proteins.     

ZSM-5/Y复合分子筛在烃类催化裂化催化剂中的应用研究

以大庆减压蜡油为原料，考察了水热脱铝ZSM-5/Y复合分子筛的催化裂化性能，并与经同样条件水热脱铝的ZSM-5和Y型沸石的机械混合分子筛进行了对比研究。结果表明，与机械混合样品相比，复合分子筛具有较大的柴油产率和气体产率，汽油产率降低。从复合分子筛结构和ZSM-5的择形催化两方面分析了复合分子筛和机械混合分子筛裂化性能差别的原因。复合分子筛的聚集体结构不利于大分子进入分子筛结构中进行裂化，有利于汽油组分的裂化。气体数据分析支持了复合分子筛的结构特点。     

N-TiO2/ZnO复合纳米管阵列的掺杂机理及其光催化活性

以ZnO纳米柱阵列为模板, 采用溶胶-凝胶法制备出TiO2/ZnO和N掺杂TiO2/ZnO的复合纳米管阵列. 扫描电镜(SEM)、X射线光电子能谱(XPS)和紫外-可见漫反射吸收光谱(UV-Vis)的结果表明: 两种阵列的纳米管均为六角形结构, 直径约为100 nm, 壁厚约为20 nm; 在N-TiO2/ZnO复合纳米管阵列中, 掺入的N离子主要是以N-Ox、N-C和N-N的形式化学吸附在纳米管表面, 仅有少量的N离子以取代式掺杂的方式占据TiO2晶格O的位置; 表面N物种形成的表面态能级和取代式掺杂导致带隙的窄化, 增强了纳米管阵列的光吸收效率, 促进了光生载流子的分离. 光催化实验结果表明, N离子的掺杂有利于N-TiO2/ZnO复合纳米管阵列光催化活性的提高.     

碳纳米管电极超大容量离子电容器交流阻抗特性

采用碳纳米管作为超大容量离子电容器的电极材料,应用交流阻抗频谱法,研究了超大容量离子电容器的频率响应特性.结果表明,用碳纳米管块作电极,超大容量离子电容器在频率250 mHz以下出现“电荷饱和”；而用活性炭块作电极, 超大容量离子电容器在频率为100 mHz时仍未出现“电荷饱和”,这说明碳纳米管电极超大容量离子电容器的频率响应特性优于活性炭电极超大容量离子电容器的频率响应特性.上述两类超大容量离子电容器的阻抗谱中均出现倾角约为45°的直线段,其相位角均远小于理想电容器的相位角90°.     

Comparative EIS study of a paste electrode containing zinc powder in neutral and near neutral solutions

The corrosion and passivation of Zn powder particles dispersed in a paste electrode immersed in 0.5 M Na₂SO₄ and 5×10^–3 M Na₂HPO₄ solutions were studied mainly by electrochemical impedance spectroscopy. The role played by diffusion in the mechanism of anodic oxidation of zinc powder particles has been shown. It was demonstrated that the anodic reactionof Zn powder in neutral or near neutral media involves at least two adsorbed intermediates. By simulating the porous structure of the electrode, some information about porous nature of zinc electrode could be extracted. Electronic Publication