利用三维虚拟技术突破物质结构教学*——从演示型工具到探索型工具的转变

针对物质结构教学的抽象性,开发了一套基于三维虚拟技术的物质结构教学软件,可对结构模型进行旋转、平移、缩放、切割、镜像、插入或删除原子(团)及启停预先设置的动画等操作,强大的交互功能不仅能对分子或晶体结构如构造异构、立体异构、晶体的堆积方式、晶胞的划分、配位数、晶体结构中的空隙及空间利用率等问题进行效果极佳的可视化教学,另一方面,通过对B₁₂与C₆₀分子空间构型转变的探究揭示数学构型的重要性,通过对六方晶胞占有原子个数的探究修正晶胞模型,通过对金属晶体的4种基本堆积方式成因的探究提出“半密置层”概念来完善紧密堆积规律等案例,展示出三维虚拟技术在微观结构探索发现方面的巨大潜力。     

Sn-Al-β分子筛酸性在葡萄糖转化反应中作用的固体NMR研究

制备了一系列具有不同酸性质的β分子筛催化剂, 通过固体核磁共振(NMR)探针分子技术对其酸性质进行了表征, 并考察了其催化葡萄糖转化为乙酰丙酸甲酯的性能. 吸附三甲基磷的³¹P NMR实验结果表明, 含有骨架Sn以及Al原子的Sn-Al-β催化剂同时具有Br?nsted与Lewis酸性. 通过2-¹³C-丙酮探针分子区分出 3种酸强度的Br?nsted酸位, 其中一种酸强度接近“超强酸”, 可能是由于空间邻近的Br?nsted酸位和Lewis酸位发生协同作用产生的. 葡萄糖转化为乙酰丙酸甲酯的催化反应结果表明, 相比于分别只含有Lewis酸位和Br?nsted酸位的Sn-β和Al-β样品以及两者的物理混合样品, Sn-Al-β分子筛催化剂具有高催化活性与产物选择性, 这主要是由于Br?nsted酸位和Lewis酸位的协同作用产生了强Br?nsted酸位, 这种强Br?nsted酸位进一步导致了更高的催化活性.     

Co3O4/UiO-66@α-Al2O3陶瓷膜对VOCs废气的分离催化性能

以α-Al₂O₃为支撑层, UiO-66为分离层, Co₃O₄为催化层, 构建了Co₃O₄/UiO-66@α-Al₂O₃陶瓷膜.对其形貌结构进行了表征, 并研究了其对挥发性有机物(VOCs)的分离催化性能. 结果表明, 该陶瓷膜对喷涂行业废气中苯与吡啶两种主要成分体现出良好的分离性, 透过侧的气体中吡啶与苯的摩尔浓度比值可由给料侧的1提高至17; 体系中引入臭氧后, 给料侧苯的浓度明显降低, 其去除率可达到89%. 透过侧的吡啶去除率仅为27%, 得到了较大程度的保留, 剩余的吡啶经收集后可进行单独的深度处理. Co₃O₄/UiO-66@α-Al₂O₃陶瓷膜在对喷涂行业废气中苯成分高效降解的同时, 能够有效解决喷涂行业废气处理过程中氮氧化物的排放问题, 有望成为喷涂行业废气预处理工艺的理想选择.     

非平衡溶剂化新理论在有机染料电子光谱中的应用

总结了非平衡溶剂化新理论和在量子化学软件Q-Chem中基于含时密度泛函理论(TD-DFT)实现溶剂效应下计算电子吸收和发射光谱的数值解方法.采用该方法计算了染料敏化太阳能电池(DSSCs)中三苯胺型有机染料■在真空和乙腈溶剂中的电子结构与光谱性质,研究发现,π共轭桥上碳碳双键的个数和溶剂效应会促进光电转换.     

中空碳纳米球的制备及VOCs吸附性能

首先, 在碱性条件下, 不使用表面活性剂, 采用St?ber小球法以正硅酸四乙酯(TEOS)和正硅酸四丙酯(TPOS)为硅源, 生成初级氧化硅球形颗粒; 然后, 使酚醛树脂(间苯二酚和甲醛)与球形氧化硅的羟基共缩合形成酚醛树脂-氧化硅复合材料; 最后, 经高温碳化和酸蚀获得了空心碳纳米球(HCNSs). 通过调节TEOS/TPOS的摩尔比获得了一系列具有良好的单分散性且粒径、 壁厚可调节的HCNSs, 其粒径和壁厚分别在280~430 nm和15~63 nm的范围内. 仅以TPOS为硅源时合成的HCNS-0/4具有较大的粒径(426 nm)和壁厚(63 nm)、 较高的比表面积(1216 m²/g)和孔容(0.508 cm³/g), 并且具有较大的挥发性有机化合物(VOCs)吸附性能, 其正己烷、 甲苯和油气的静态吸附容量分别为2.02, 1.42和0.926 g/g, 正己烷和甲苯的动态吸附容量分别为2.01 g/g和1.37 g/g, 均远高于商业化活性炭.     

Heteronuclear Cross‐Relaxation Effects in the NMR Spectroscopy of Hyperpolarized Targets

Dissolution dynamic nuclear polarization (DNP) enables high‐sensitivity solution‐phase NMR experiments on long‐lived nuclear spin species such as ¹⁵N and ¹³C. This report explores certain features arising in solution‐state ¹H NMR upon polarizing low‐γ nuclear species. Following solid‐state hyperpolarization of both ¹³C and ¹H, solution‐phase ¹H NMR experiments on dissolved samples revealed transient effects, whereby peaks arising from protons bonded to the naturally occurring ¹³C nuclei appeared larger than the typically dominant ¹²C‐bonded ¹H resonances. This enhancement of the satellite peaks was examined in detail with respect to a variety of mechanisms that could potentially explain this observation. Both two‐ and three‐spin phenomena active in the solid state could lead to this kind of effect; still, experimental observations revealed that the enhancement originates from ¹³C→¹H polarization‐transfer processes active in the liquid state. Kinetic equations based on modified heteronuclear cross‐relaxation models were examined, and found to well describe the distinct patterns of growth and decay shown by the ¹³C‐bound ¹H NMR satellite resonances. The dynamics of these novel cross‐relaxation phenomena were determined, and their potential usefulness as tools for investigating hyperpolarized ensembles and for obtaining enhanced‐sensitivity ¹H NMR traces was explored.     

Synthesis and antibacterial activity of ethyl 2-amino-6-methyl-5-oxo- 4-aryl-5,6-dihydro-4H-pyrano[3,2-c]quinoline-3-carboxylate

The three-component reaction of 4-hydroxy-1-methyl-2(1H)-quinolinone, aromatic aldehydes and ethyl cyanoacetate was carried out in the presence of a catalytic amount of 4-dimethyl aminopyridine(DMAP) in aqueous ethanol. The reactions result in the formation of pyranoquinoline derivatives in excellent yields. Antibacterial activity has been evaluated against Gram positive and Gram negative bacteria for some of the synthesized compounds. The results indicated that these compounds are moderately effective against bacterial growth and their effectiveness is highest against Pseudomonas aeruginosa.     

Electrochemical sensor based on f-SWCNT and carboxylic group functionalized PEDOT for the sensitive determination of bisphenol A

A simple,sensitive,and reliable method for the voltammetric determination of bisphenol A(BPA) by using carboxylic group functionalized single-walled carbon nanotubes(f-SWCNT)/carboxylic-functionalized poly(3,4-ethylenedioxythiophene)(PC4) complex modified glassy carbon electrode(GCE) has been successfully developed.The electrochemical behavior of BPA at the surface of the modified electrode is investigated by electrochemical techniques.The cyclic voltammetry results show that the as-prepared electrode exhibits strong catalytic activity toward the oxidation of BPA with a well-defined anodic peak at 0.623 V in PBS(0.1 mol/L,pH 7.0).The surface morphology of the 3D network of composite film is beneficial for the adsorption of analytes.Under the optimized conditions,the oxidation peak current is proportional to BPA concentration in the range between 0.099 and 5.794 μmol/L(R~2 = 0.9989),with a limit of detection of 0.032 μmol/L(S/N = 3).The enhanced performance of the sensor can be attributed to the excellent electrocatalytic property of/-SWCNT and the extraordinary conductivity of PC4.Furthermore,the proposed modified electrode displays high stability and good reproducibility.The good result on the voltammetric determination of BPA also indicates that the asfabricated modified electrode will be a good candidate for the electrochemical determination and analysis of BPA.     

Allyl phthalazinone synthesis,polymerization and polymer properties

A phthalazinone monomer with an allyl group, i.e. 4-（3-allyl-4-hydroxyphenyl）phthalazin-1（2H）-one, was synthesized and then copolymerized with 4-（4-hydroxylphenyl）（2H）-phthalazin-1-one and 2,6- diflurobenzonitrile by means of aromatic nucleophilic polycondensation to provide a series of crosslinkable poly（aryl ether nitrile）s. The virgin copolymers exhibited good solubility in polar organic solvents with relative high molecular weights （Mw： 45,130-58,403, inherent viscosities： 0.58-0.75 dL/ g）. After cross-linking, the thermal stability and solvent resistance of the polymer increased.     

Effect of the graphitic degree of carbon supports on the catalytic performance of ammonia synthesis over Ba-Ru-K/HSGC catalyst

A series of high surface area graphitic carbon materials （HSGCs） were prepared by ball-milling method. Effect of the graphitic degree of HSGCs on the catalytic performance of Ba-Ru-K/HSGC-x （x is the ball-milling time in hour） catalysts was studied using ammonia synthesis as a probe reaction. The graphitic degree and pore structure of HSGC-x supports could be successfully tuned via the variation of ball-milling time. Ru nanoparticles of different Ba-Ru-K/HSGC-x catalysts are homogeneously distributed on the supports with the particle sizes ranging from 1.6 to 2.0 nm. The graphitic degree of the support is closely related to its facile electron transfer capability and so plays an important role in improving the intrinsic catalytic performance of Ba-Ru-K/HSGC-x catalyst.