Kinetics, selectivity, and mechanism of the reactions of arenes with adamantyl carbocations in sulfuric acid

Data on the kinetics, selectivity, kinetic isotope effect, and the effect of the acidity of the medium on the rate of the reactions of benzene and alkylbenzenes in sulfuric acid (59–78 wt.% H₂SO₄) solutions of 1-adamantanol at 30 °C indicate that the direct reagents are the adamantyl carbocations (Ad⁺) that alkylate the arenes. The ortho positions of the benzene ring are not accessible on account of steric hindrances. The rate of attack by the Ad⁺ cation on the accessible para and meta positions of the ring is controlled by the formation of a σ complex. __________ Translated from Teoreticheskaya i éksperimental’naya Khimiya, Vol. 42, No. 1, pp. 14–18, January–February, 2006.     

金属载体催化剂的涂层研究

在高温氧化处理不同时间的金属载体箔片上涂覆MgAl2O4/Al2O3过渡涂层,利用TG-DSC,XRD,SEM,BET和超声振动等分析测试技术,对载体和涂层的微观结构与表面特性进行研究.结果表明,在950 ℃下高温氧化5 h,箔片表面生成板状Al2O3晶须,有利于增强涂层与箔片的附着力.在载体表面涂覆一层MgAl2O4/Al2O3过渡涂层,有助于提高活性组分与金属载体的结合力,可以获得高结合强度的涂层结构,促使活性元素高度分散.     

Electrochemical technique for the determination of fractal dimension of dental surfaces

Fractal dimension of a carious tooth surface was determined using an electrochemical method. The method was based on time-dependent diffusion towards electrode surfaces, which is one of the most useful and reliable methods for the determination of fractal dimension of electrode surfaces. For this purpose, the tooth was covered with a gold layer, which acted as an electrode in electrochemical experiments. It is suggested that the fractal dimension can be used as a quantitative measure of the state of dental surfaces. The method presented demonstrates the power of electrochemical techniques for the determination of fractal dimension of surface of non-conducting objects.     

高效全固化钛宝石腔内倍频蓝光和四倍频紫外激光器的研究

用半导体抽运的Q开关YLF倍频激光器抽运钛宝石晶体，在平凹腔内加入组合的石英双折射滤光片压缩线宽，用LBO晶体腔内激发二次谐波，聚焦到BBO上产生四次谐波深紫外光。在抽运功率3．8w时，输出610mW．416nm蓝光。用长焦距的透镜聚焦二次谐波．得到64mW，208nm的紫外激光。基频光的谱线宽度是决定倍频效率的关键因素。实验观察到激光器的频谱宽度与双折射滤光片的带宽有一个数量级的差别，考虑到模式竞争和增益饱和效应，数值模拟了加入双折射滤光片后的钛宝石激光器的实际线宽，结果与实验中测量的数据基本一致。实验还分析了基频光的线宽对二次谐波效率的影响、二次谐波的线宽对四次谐波效率的影响、基频光的波长对四次谐波激发效率的影响。     

Symbiotic N2 Fixation and N Uptake of Yellow and White Lupines Influenced by Spontaneous Rhizobia Infection and Substrate

Abstract

By using soil as substrate, white and yellow lupines (Lupinus albus L., Lupinus luteus L.) assimilated higher N amounts than under quartz sand conditions. This was caused by spontaneous infection of lupines with wild Rhizobia strains and also by an additional N uptake from the soil. In yellow lupines without inoculation in non-sterile soil, only the additional N uptake played a role. Differences in P and K supply as the cause of different N acquisition from soil and quartz sand could be excluded. As compared with white lupines, yellow lupines inoculated with Rhizobia had a high N₂ fixation that exceeded the effect of spontaneous infections. This result as well as the positive effect of spontaneous infections with soil-borne Rhizobia on white lupines indicates insufficient effectiveness of the strains used for inoculation on this plant species.     

An analytical method for measuring α‐amylase activity in starch‐containing foods

The quality of starch‐containing foods may be significantly impaired by contamination with very small amounts of α‐amylase, which can enzymatically hydrolyze the starch and cause viscosity loss. Thus, for quality control, it is necessary to have an analytical method that can measure low amylase activity. We developed a sensitive analytical method for measuring the activity of α‐amylase (from Bacillus subtilis) in starch‐containing foods. The method consists of six steps: (1) crude extraction of α‐amylase by centrifugation and filtration; (2) α‐amylase purification by desalting and anion‐exchange chromatography; (3) reaction of the purified amylase with boron‐dipyrromethene (BODIPY)‐labeled substrate, which releases a fluorescent fragment upon digestion of the substrate, thus avoiding interference from starch derivatives in the sample; (4) stopping the reaction with acetonitrile; (5) reversed‐phase solid‐phase extraction of the fluorescent substrate to remove contaminating dye and impurities; and (6) separation and measurement of BODIPY fluorescence by HPLC. The proposed method could quantify α‐amylase activities as low as 10 mU/mL, which is enough to reduce the viscosity of starch‐containing foods. Copyright © 2012 John Wiley & Sons, Ltd.     

Low-temperature ECR-PEMOCVD deposition of high-quality crystalline gallium nitride films: A comparative study of intermediate layers for growth on amorphous glass substrates

A low temperature growth method based on an electron cyclotron resonance plasma-enhanced metal organic chemical vapor deposition system (ECR-PEMOCVD) was proposed for the growth of GaN (Gallium nitride) films on ordinary amorphous soda-lime glass substrates. To alleviate the large lattice mismatch between GaN film and glass substrate and improve the heat dissipation performance for potential optoelctrical device application, five intermediate layers (Cu, Ni, Ti, Ag, and ITO) were deposited on the glass substrate before the growth of GaN. A comparative study was performed through structural analysis of the as-grown GaN films with various intermediate layers investigated by means of in-situ reflection high energy electron diffraction (RHEED), X-ray diffraction (XRD), and atomic force microscopy (AFM). The results indicate that the Ti intermediate layer has a great advantage over other intermediate layers in view of crystalline quality and smooth surface, therefore is more suitable and preferred for the potential application in optoelectronic devices.     

Propagation of extremely short pulses in a graphene–boron nitride bilayer

In this study we investigate the propagation of extremely short optical pulses in a thin film formed by a graphene grown on a boron nitride substrate. Conduction electrons of the system are described on the basis of the long-wavelength effective Hamiltonian in the case of low temperatures; the electromagnetic field being taken into account within the framework of the classical Maxwell equations. The time evolution of the pulse?s shape for different speeds and maximum amplitudes of an extremely short pulse is analyzed.     

Regioselective Hydroformylation of Internal and Terminal Alkenes via Remote Supramolecular Control

Regioselective catalytic transformations using supramolecular directing groups are increasingly popular as it allows for control over challenging reactions that may otherwise be impossible. In most examples the reactive group and the directing group are close to each other and/or the linker between the directing group is very rigid. Achieving control over the regioselectivity using a remote directing group with a flexible linker is significantly more challenging due to the large conformational freedom of such substrates. Herein, we report the redesign of a supramolecular Rh–bisphosphite hydroformylation catalyst containing a neutral carboxylate receptor (DIM pocket) with a larger distance between the phosphite metal binding moieties and the DIM pocket. For the first time regioselective conversion of internal and terminal alkenes containing a remote carboxylate directing group is demonstrated. For carboxylate substrates that possess an internal double bond at the Δ-9 position regioselectivity is observed. As such, the catalyst was used to hydroformylate natural monounsaturated fatty acids (MUFAs) in a regioselective fashion, forming of an excess of the 10-formyl product (10-formyl/9-formyl product ratio of 2.51), which is the first report of a regioselective hydroformylation reaction of such substrates.     

Investigation of light output performance for gallium nitride-based light-emitting diodes grown on different shapes of patterned sapphire substrate

GaN-based blue light-emitting diodes (LEDs) on various patterned sapphire substrates (PSSs) are investigated in detail. Hemispherical and triangular pyramidal PSSs have been applied to improve the performance of LEDs compared with conventional LEDs grown on planar sapphire substrate. The structural, electrical, and optical properties of these LEDs are investigated. The leakage current is related to the crystalline quality of epitaxial GaN films, and it is improved by using the PSS technique. The light output power and emission efficiency of the LED grown on triangular pyramidal PSS with optimized fill factor show the best performance in all the samples, which indicates that the pattern structure and fill factor of the PSS are related to the capability of light extraction.