Micromechanisms and Mechanics of Damage and Fracture in Thin Film/Substrate Systems

The purpose of this paper is to review the mechanisms and available theoretical methods for modeling the strength and failure of thin film/substrate systems     

连续运转的掺钛蓝宝石激光器

本文报导一种连续波氩离子激光泵浦的掺钛蓝宝石激光器。在氩离子激光功率(全谱线)为10.45瓦且仅用一组腔镜时,获得最大平均功率超过1000mW、调谐范围750～850nm的掺钛蓝宝石激光输出。     

MEASUREMENTS OF Fe AND Cu K-Shell IONIZATION CROSS SECTIONS BY SLOW ELECTRON IMPACT

ＭＥＡＳＵＲＥＭＥＮＴＳＯＦＦｅＡＮＤＣｕＫ－ＳｈｅｌＩＯＮＩＺＡＴＩＯＮＣＲＯＳＳＳＥＣＴＩＯＮＳＢＹＳＬＯＷＥＬＥＣＴＲＯＮＩＭＰＡＣＴＬｉＴａｉｈｕａＡｎＺｈｕＬｕｏＺｈｅｎｇｍｉｎｇＣｅｎｔｅｒｆｏｒＲａｄｉａｔｉｏｎＰｈｙｓｉｃｓ，Ｉｎｓ...     

The effect of GaN and ain buffer layers on GaN film properties grown on both C-plane and A-plane sapphire

This paper presents a comparative study of the properties of GaN grown by organometallic vapor phase epitaxy, using both a GaN and A1N buffer layer, as a function of sapphire orientation (c-plane vs a-plane). Results are presented for varying the thickness of the buffer layer, varying the growth temperature of the GaN film, and also varying the ammonia/trimethylgallium mass flow ratio. The electron Hall mobilities of GaN films grown on an A1N buffer layer were, in general, higher compared to films grown using a GaN buffer layer. In addition, growth on a-plane sapphire resulted in higher quality films (over a wider range of buffer thicknesses) than growth on c-plane sapphire. The room temperature electron mobilities were also found to be dependent on, not only the growth temperature, but also the ammonia/trimethylgallium mass flow ratio.     

Subtilisin catalysis of substrate anchored in cyclodextrin

The N-benzoyl-l-tyrosine ethyl ester (BTEE) anchored in cyclodextrin (β and β-methyl CD) serves as an excellent substrate for subtilisin Carlsberg catalysis. The rate of hydrolysis was found to be approximately twofold higher than that of the methanolic substrate. The K_mapp and V_max values for the CD anchored substrates were significantly higher than the methanol-solubilized BTEE.     

可调谐的双波长钛宝石激光器

一台可调谐钛宝石激光器两个波长同时运转,在数ns以内同步,相对波长差最大可达55nm。观测到明显的两种波长激光的竞争和关联。由BBO实现了两波的和频与倍频。     

单层光学薄膜中薄膜－衬底体系的双重干涉效应及其应用

提出了单层光学薄膜中薄膜与衬底反射光之间的双重干涉效应的理论，实验结果证实了理论分析的正确性。双重干涉效应使薄膜－衬底体系的热致反射调制度高达８０％，这一效应可望有极广泛的应用     

以国产微晶纤维素膜作固体基质五种多环芳烃的室温磷光法研究

本文考察了10种国产纤维素膜用于多环芳烃固体基质室温磷光(SS-RTP)的可行性。实验表明:MN-C和MN-P两种型号的微晶纤维素膜用于多环芳烃的SS-RTP是适宜的。阴离子交换纤维素膜、CM-纤维素膜和聚酰胺-6膜也能诱导出多环芳烃的RTP来,但其性能逊于前两种。故本文应用MN-C和MN-P两种微晶纤维素膜基质考察了五种多环芳烃的RTP特征,并建立了它们的SS-RTP新方法。并与用滤纸作基质的实验结果进行了比较,表明两种新的固体基质的RTP性能优于滤纸基质。     

Sol Gel Processing of Low Permittivity,Fiber-Reinforced SiO2-Polyimide Substrates

Low permittivity ceramic substrates with a sandwich structure consisting of a porous, fiber-reinforced SiO₂ core and two thin polymer plates were fabricated by sol-gel processing, and polymer infiltration. The rheological behavior of an aqueous colloidal SiO₂ sol, containing short SiO₂ fibers was studied as a function of particle loading, fiber loading and gelation time. Short SiO₂ fibers were introduced to limit drying shrinkage and thus minimize substrate cracking during drying. After the psuedoplastic sol was tape cast and sintered at 1150°C for 2 h, a polyimide solution was infiltrated into the porous SiO₂ core. Permittivities ranging from 1.81 to 3.08 could be obtained by using 32–42% SiO₂, 5–50% polyimide and 63 to 8% porosity. The substrate strength was increased from 1.93 MPa to 3.83 MPa after polyimide infiltration.