Identification of four cornua by ultra‐performance liquid chromatography with time‐of‐flight mass spectrometry coupled with principal component analysis

An ultra‐high performance liquid chromatography with quadrupole time‐of‐flight mass spectrometry method coupled with principal component analysis was developed and applied to the identification of Cornu Antelopis, Cornu Bubali, Cornu Naemorhedi, and Cornu Bovis. The data obtained from the trypsin‐digested samples were subjected to principal component analysis to classify these four cornua. Additionally, marker peptides of the cornua were determined by orthogonal partial least‐squares discriminant analysis, and fragmentation tandem mass spectra of these marker peptides were evaluated. The results from this study indicate that the proposed method is reliable, and it has been successfully applied to the identification of variants of cornua commonly used in traditional Chinese medicine.     

Fictitious domain methods for two‐phase flow energy balance computations in nuclear components

This paper is dedicated to the numerical simulation of nuclear components (cores and steam generators) by fictitious domain methods. The fictitious domain approach consists in immersing the physical domain under study in a Cartesian domain, called the fictitious domain, and in performing the numerical resolution on this fictitious domain. The calculation times are then efficiently reduced by the use of fast solvers. In counterpart, one has to handle with an immersed boundary, generally non‐aligned with the Cartesian mesh, which can be non‐trivial. The two fictitious domain methods compared here on industrial simulations and developed by Ramière et al. deal with an approximate immersed interface directly derived from the uniform Cartesian mesh. All the usual immersed boundary conditions (Dirichlet, Robin, Neumann), possibly mixed, are handled through a unique formulation of the fictitious problem. This kind of approximation leads to first‐order methods in space that exhibit a good ratio of the precision of the approximate solution over the CPU time, which is very important for industrial simulations. After a brief recall of the fictitious domain method with spread interface (Ramière et al., CMAME 2007) and the fictitious domain method with immersed jumps (Ramière et al., JCP 2008), we will focus on the numerical results provided by these methods applied to the energy balance equation in a steam generator. The advantages and drawbacks of each method will be pointed out. Generally speaking, the two methods confirm their very good efficiency in terms of precision, convergence, and calculation time in an industrial context. Copyright © 2011 John Wiley & Sons, Ltd.     

Qualitative and quantitative determination of Atractylodes rhizome using ultra‐performance liquid chromatography coupled with linear ion trap–Orbitrap mass spectrometry with data‐dependent processing

A quick and effective workflow based on ultra‐performance liquid chromatography coupled with electron spray ionization and LTQ‐Orbitrap mass spectrometry (UPLC‐LTQ‐Orbitrap MS) was established for compositional analysis and screening of the characteristic compounds of three species of Atractylodes rhizome for quality evaluation. This technique was employed to determine the seven main components in Atractylodes rhizome samples. Ultimately, 78 constituents were identified; of these, seven characteristic compounds were selected for species discrimination, comprising atractylodin (63), atractylenolide I (43), atractylenolide II (49), atractylenolide III (53), atractylon (69), methyl‐atractylenolide II (54) and (4E,6E,12E)‐tetradecadecatriene‐8,10‐diyne‐1,3‐diacetate (59). The seven main compounds, including six characteristic compounds, were simultaneously determined in 29 batches of Atractylodes rhizome samples. Thus, the method validation showed acceptable results. Quantitative analysis showed significantly different contents of the seven main components among the three species of Atractylodes rhizome, which indicates possible distinctions in the pharmacological effects. This established method can simultaneously provide qualitative and quantitative results for compositional characterization of Atractylodes rhizomes and for quality control.     

A mass‐fraction‐based interface‐capturing method for multi‐component flow

An interface‐capturing method based on mass fraction is developed to solve the Riemann problem in multi‐component compressible flow. Equations of mass fraction with modified form, which is derived from conservative equations of mass, are employed here to capture the interface. By introducing mass fraction into Euler equations system, as well as other conservative coefficients, a quasi‐conservative numerical model is created. Numerical examples show that the mass fraction model performs well not only in multi‐component fluids modeled by simple stiffened gas equation of state (EOS) but also in that modeled by complex Mie–Grüneisen EOS. Moreover, the mass fraction model is applied to Riemann problem with piecewise EOS; the expression of which depends on density. It is found that the mass fraction model can well adapt to the analytic change in piecewise EOS and produce accuracy solutions with fewer unknown quantities, and the model can be easily extended to m‐component fluid mixture by using only m + 4 equations with no additional conditions. Copyright © 2013 John Wiley & Sons, Ltd.     

Pd(0)-guanidine@MCM-41: a very effective catalyst for rapid production of bis (pyrazolyl)methanes

In this research, a rapid, green and efficient protocol for synthesis of bis (pyrazolyl)methane derivatives in the presence of Pd(0)-guanidine@MCM-41 catalysts under solvent-free conditions by the following two methods has been reported: (i) via the one-pot pseudo five-component reaction among phenylhydrazine (2 equivalents), ethyl acetoacetate (2 equivalents) and aromatic aldehydes (1 equivalent); and (ii) the one-pot pseudo three-component reaction between 3-methyl-1-phenyl-1H-pyrazol-5(4H)-one (2 equivalents) and aromatic aldehydes (1 equivalent). Some advantages of this protocol include: green conditions, extremely short times, high efficiency, proper one-pot operation, generality of method, easy work-up and recyclability, and reusability of the catalyst up to five times without significant loss in catalytic activity.     

Serum pharmacochemistry combined with multiple data processing approach to screen the bioactive components and their metabolites in Mutan Cortex by ultra‐performance liquid chromatography tandem mass spectrometry

Root cortex of Paeonia suffruticosa Andrews (Paeoniaceae), known as Moutan Cortex (MC), is known to have anti‐allergic and anti‐inflammatory properties. However, the constituents absorbed into blood after oral administration of MC remain unknown. A sensitive and rapid method by ultra‐high‐pressure liquid chromatography–electrospray ionization–quadrupole‐time‐of‐flight mass spectrometry (UPLC‐ESI‐Q‐TOF‐MS) technology and the MetaboLynx^TM software combined with multiple data processing approach (Mdpa) was established to investigate the absorbed constituents in rats after oral administration of MC, providing unique high‐throughput capabilities for drug metabolism study. A hyphenated electrospray ionization and quadrupole‐time‐of‐flight analyzer was used for the determination of accurate mass of the fragment ion in negative mode, with excellent MS mass accuracy and enhanced data acquisition. This rapid automated analysis method was successfully applied for screening and identification of the constituents absorbed and metabolized studies of MC after oral administration to rats. A total of 46 peaks were obtained from MC, 41 of which were tentatively characterized. In the VIP‐plot of orthogonal partial least‐squares discriminant analysis, 23 interesting ions in serum samples were extracted, and 16 parent components and seven metabolites were detected in vivo. The integrative serum pharmacochemistry technique, UPLC‐ESI‐Q‐TOF‐MS, and Mdpa method were successfully applied for rapid discovery of multiple components from MC. Copyright © 2013 John Wiley & Sons, Ltd.     

离子色谱法分析火灾烟气成分的完善

建立了离子色谱法分析火灾烟气成分的方法。样品用去离子水和氢氧化钠溶液配制,采用0.45μm的滤膜过滤2~3次后,配制成样品溶液,稀释适当倍数后进样分析,采用电导检测器进行检测。各阴离子在1.0~50.0mg/L范围内与色谱峰面积均呈现良好的线性关系,相关系数均大于0.999,方法的检出限在0.06~0.1 mg/L之间。方法的加标回收率在86.0%~110%之间,测定结果的相对标准偏差为0.5%~9.0%(n=5)。该方法简便快捷,选择性好,灵敏度高,可满足火灾烟气成分的分析要求。     

Supported dual‐acidic 1,3‐disulfoimidazolium chlorozincate@HZSM‐5 as a promising heterogeneous catalyst for synthesis of indole derivatives

HZSM‐5‐supported Brönsted and Lewis acidic ionic solid 1,3‐disulfoimidazolium chlorozincate materials ([dsim]₂[ZnCl₄]@HZSM‐5) were synthesized with various ratios (3, 6, 9, 17 and 50% w/w). The heterogeneous materials were characterized via a variety of spectroscopic techniques. Dual acidity of these materials was determined using specified techniques. These acidic solids were examined as stable heterogeneous catalysts for the Fischer indole reaction of equimolar amounts of phenylhydrazine hydrochloride and various aliphatic or aromatic ketones at 80–90°C in neat condition to produce substituted indole derivatives. The efficient 17% ionic salt‐loaded HZSM‐5 composite was easily reused for ten consecutive cycles with a slight loss of its activity. The recycled catalyst was further analysed using powder X‐ray diffraction and inductively coupled plasma optical emission spectrometric techniques.     

In situ liquid SIMS analysis of uranium oxide

Trace analysis of nuclear materials in solid particles collected in the environment or particles in liquid slurry generated in nuclear material manufacturing processes can pinpoint elemental, organic, and isotopic signatures of nuclear fuel cycle activities and processes. Such information can support nuclear safeguards programs by increasing our ability to detect undeclared nuclear materials, routine activities for safeguarding at declared facilities, and illicit activities. However, trace radioactive material analysis in liquids and slurries is challenging using bulk approaches. For example, one drawback of sensitive analysis such as inductively coupled plasma mass spectrometry (ICP-MS) is that sample is consumed or destroyed as a result of the technical approach. We developed a vacuum compatible microfluidic interface to enable surface analysis of liquids and solid–liquid interactions using time-of-flight secondary ion mass spectrometry (ToF-SIMS). In this work, we illustrate the initial results from the analysis of liquid uranium oxide standard solutions using in situ liquid SIMS. Because the liquid SIMS analysis is almost nondestructive, the same sample can then be analyzed by other analytical techniques or saved for future reference. Consequently, multimodal analysis is possible. Our results demonstrate that in situ liquid SIMS can be used as a new approach to analyze radioactive materials in liquid and slurry forms of relevance to diverse applications.     

Nanomagnetically modified vitamin B3 (Fe3O4@Niacin): An efficient and reusable green biocatalyst for microwave‐assisted rapid synthesis of 2‐amino‐3‐cyanopyridines in aqueous medium

Superparamagnetic nanoparticles of modified vitamin B₃ (Fe₃O₄@Niacin) represent a new, efficient and green biocatalyst for the one‐pot synthesis of 2‐amino‐3‐cyanopyridine derivatives via four‐component condensation reaction between aldehydes, ketones, malononitrile, and ammonium acetate under microwave irradiation in water. This new magnetic organocatalyst was easily isolated from the reaction mixture by magnetic decantation using an external magnet and reused at least six times without significant degradation in the activity. The catalyst was fully characterized by FT‐IR, XRD, SEM, VSM, UV–Vis, DLS and EDS. Excellent yield, very short reaction time (7–10 min), operational simplicity, easy work‐up procedure, avoidance of hazardous or toxic catalysts and organic solvents are the main advantages of this green methodology which makes it more economic than the other conventional methods.