K/LiCoO2的制备及其同时催化去除碳烟和NOx的性能研究

采用溶液燃烧法和浸渍法制备了铜铁矿结构的钴酸锂(LiCoO2)及其负载K的系列催化剂样品,并通过XRD、NOx-TPD、H2-TPR、程序升温反应等对其进行了结构表征与性能评价.结果表明LiCoO2是一种能有效同时去除碳烟(PM)和NOx的催化剂;K负载可提高其催化活性,其中10%K/LiCoO2具有最低的PM起燃温度(246℃)和最大NOx→N2转化率(35.9%);催化剂表面生成的O2-/O-活性氧物种以及较强的NOx吸附存储能力可能是K/LiCoO2催化活性提高的原因.     

润湿剂促进燃煤细颗粒声波团聚脱除的实验研究

在声波团聚室中研究了润湿剂液滴与细颗粒碰撞团聚脱除特性,提出了一种利用润湿剂促进细颗粒在声波场中捕集的新方法。结果表明,不同润湿剂溶液对细颗粒在声波场中的团聚脱除效果存在较大差异,采用JFC和FS-310润湿剂溶液时,细颗粒分级脱除效率与采用水时的分级脱除效率相近。而SDS和Silanol w22溶液,则可有效提高细颗粒在各粒径段的分级脱除效率。细颗粒在声波场中的脱除效率与润湿剂润湿性能具有很好的相关性,随润湿剂对细颗粒相对接触角增大而降低,在声压级为150 dB时,相对接触角由83°降低到0°,细颗粒脱除效率提高了18%,在无声场作用下,脱除效率仅提高了5%。细颗粒脱除效率随声压级的增大而提高,在低声压级条件下,添加润湿剂可有效提高细颗粒脱除效率,声压级在130 dB时,添加SDS溶液液滴后细颗粒脱除效率比声场单独作用时的脱除效率提高了25%。表明添加润湿剂可有效提高细颗粒在声波场中的团聚脱除效率,实现在低声压级条件下,获得高的细颗粒脱除效率。     

Development of novel graphene-like layered hexagonal boron nitride for adsorptive removal of antibiotic gatifloxacin from aqueous solution

Graphene-like layered hexagonal boron nitride (g-BN) was prepared and characterized. The performance of using g-BN as an adsorbent for removal of fluoroquinolone antibiotic gatifloxacin (GTF) from aqueous solution was evaluated. g-BN showed an excellent adsorption capability with notable GTF adsorption ratio of more than 90%. Data of equilibrium adsorption of GTF onto g-BN at different temperatures were represented by Langmuir, Freundlich and Tempkin isotherm models, and Langmuir exhibited the best fitting with the maximum adsorption capacity of 88.5 mg·g^?1 at 288 K. GTF adsorption was insignificantly affected by solution pH. Competitive role of Na⁺ and Ca²⁺ in the solution inhibited the adsorption of GTF and decreased the adsorption capacity a bit. The adsorption process was spontaneous and exothermic. The adsorption was probably governed by π–π interaction between GTF and g-BN, and electrostatic interaction may also exist in the adsorption process.     

A Luminescent Hypercrosslinked Conjugated Microporous Polymer for Efficient Removal and Detection of Mercury Ions

A hypercrosslinked conjugated microporous polymer (HCMP‐1) with a robustly efficient absorption and highly specific sensitivity to mercury ions (Hg²⁺) is synthesized in a one‐step Friedel–Crafts alkylation of cost‐effective 2,4,6‐trichloro‐1,3,5‐triazine and dibenzofuran in 1,2‐dichloroethane. HCMP‐1 has a moderate Brunauer–Emmett–Teller specific surface (432 m² g⁻¹), but it displays a high adsorption affinity (604 mg g⁻¹) and excellent trace efficiency for Hg²⁺. The π–π* electronic transition among the aromatic heterocyclic rings endows HCMP‐1 a strong fluorescent property and the fluorescence is obviously weakened after Hg²⁺ uptake, which makes the hypercrosslinked conjugated microporous polymer a promising fluorescent probe for Hg²⁺ detection, owning a super‐high sensitivity (detection limit 5 × 10⁻⁸ mol L⁻¹).

     

Experimental design approach for petrochemical waste water treatment using solar assisted photo Fenton process

In this study, the effect of photo-Fenton process on the treatment of petrochemical waste water treatment was investigated. The influence of process conditions were determined by factorial design. Optimization of the process conditions were performed by central composite design. Under, optimized conditions lab scale and solar assisted pilot scale of petrochemical waste water treatment was performed. Three factors namely initial pH, H₂O₂ concentration (mM) and Fe²⁺ concentration (mM) executed the essential role in petrochemical waste water treatment. Central composite design resulted in the prediction of optimized value as 6.5 initial pH, 15.65 mM of H₂O₂ concentration and 2.09 mM of Fe²⁺ concentration. Under these conditions, the reduction in chemical oxygen demand (COD) percentage reached about 68.67 ± 2.8% after 280 min in pilot scale of solar assisted photo Fenton process of petrochemical waste water treatment. Thus, experimental design combined with advanced Fenton process can become a feasible unconventional method for petrochemical waste water treatment.     

Response surface methodology for optimization of heavy metal removal by magnetic biosorbent made from anaerobic sludge

In this study, optimum conditions for adsorption of heavy metals such as Cu²⁺, Cd²⁺ and Pb²⁺ onto a low-cost, magnetically modified-alkali conditioned anaerobically digested sludge (MADS) adsorbent were obtained. Response Surface Methodology (RSM) incorporating Central Composite Design (CCD) of experiments was applied to optimize four independent process variables. Statistical analysis was executed by ANOVA and the quadratic model developed had regression coefficients of 0.959, 0.957 and 0.95 for Cu²⁺, Cd²⁺ and Pb²⁺, respectively. The independent variables such as pH, time and initial concentration positively influenced adsorption capacity, q_e, whereas the value of q_e decreased with an increase in MADS dosage. Model validation experiments for optimization of adsorption process showed comparable results with predicted values. The adsorption capacity of MADS adsorbent at optimum conditions found through RSM analysis was 29.721 mg L^?1, 28.551 mg L^?1 and 28.601 mg L^?1 for Cu²⁺, Cd²⁺ and Pb²⁺ respectively.     

微生物铁氧化还原作用对水中砷锑去除影响的研究进展

砷锑污染在全球领域广泛存在,与常规的铁氧化物相比,微生物铁氧化生成的含Fe(Ⅲ)矿物对水中砷/锑(As/Sb)具有更强的吸附能力,并因其高效、实用和环境友好而具有广阔的应用前景,但微生物铁还原也可能导致被吸附的As/Sb再次释放。本文综述了微生物铁氧化还原作用对As/Sb去除影响的研究进展,归纳了铁矿物“合成-溶解-转化”的微生物循环过程以及该循环伴随的水中As/Sb固定、溶解与转化机理,整合了微生物合成Fe(Ⅲ)矿物的矿物学性质、对As/Sb固定的热动力学规律和络合机制,总结了微生物合成Fe(Ⅲ)矿物对As/Sb去除的影响因素,基于该研究的现存问题展望了利用微生物铁氧化还原作用去除As/Sb的发展方向。     

Polyamide Nanofiltration Membrane from Surfactant-assembly Regulated Interfacial Polymerization of 2-Methylpiperazine for Divalent Cations Removal

Removal of metal ions from water can not only alleviate the scaling problem of domestic and industrial water, but also solve the water safety problem caused by heavy metal ion pollution. Here, we fabricate a positively charged nanofiltration membrane via surfactant-assembly regulated interfacial polymerization(SARIP) of 2-methylpiperazine(MPIP) and trimesoyl chloride(TMC). Due to the existence of methyl substituent, MPIP has lower reactive activity than piperazine(PIP) but stronger affinity to hexane, resulting in a nanofiltration(NF) membrane with an opposite surface charge and a loose polyamide active layer. Interestingly, with the help of sodium dodecyl sulfate(SDS) assembly at the water/hexane, the reactivity between MPIP and TMC was obviously increased and caused in turn the formation of a positively charged polyamide active layer with a smaller pore size, as well as with a narrower pore size distribution. The resulting membrane shows a highly efficient removal of divalent cations from water, of which the rejections of MgCl₂, CoCl₂ and NiCl₂ are higher than 98.8%, 98.0% and 98.0%, respectively, which are better than those of most of other positively charged NF membranes reported in literatures.     

Converting red mud wastes into mesoporous ZSM-5 decorated with TiO2 as an eco-friendly and efficient adsorbent-photocatalyst for dyes removal

Red mud wastes have been converted into mesoporous zeolite socony mobile-5 (ZSM-5) followed by deposited titanium dioxide (TiO₂) nanoparticles to generate synergy adsorption-photodegradation for removal of dye removal in waste water. The amount of TiO₂ loading was varied to achieve optimum photocatalytic activity while maintaining the mesoporosity and high surface area of ZSM-5. Sol-gel method facilitated the formation of anatase TiO₂ on the ZSM-5. The fourier transform infrared spectra clarified the formation of Si–O–Ti at 957 cm^?1 by the exchanging the hydrogen ion with titanium ion, which proved by decreasing the absorption band of Si–OH and Si–O interaction at 964 and 944 cm^?1, respectively. Sol-gel method also preserved the mesopore diameter of ZSM-5 at 3.5 nm which allow the diffusion of methylene blue (MB) molecules into the pores. However, the surface area and the pore volume were slightly reduced with increasing the TiO₂ loading. The adsorption performance of samples showed that the increasing in the TiO₂ loading led to the decreasing in the adsorption capacity. All samples showed the suitability towards the pseudo second order kinetic. The Langmuir isotherm was suitable to describe the adsorption mechanism by monolayer adsorption. Mesoporosity of ZSM-5 accelerated the adsorption of dye via the increase of mass transfer in the pore channel which confirmed by the low intercept of intraparticle diffusion model at the first stage. The photocatalytic test showed that 10% TiO₂ loading on the ZSM-5 exhibited the highest methylene blue removal followed by 5% and 20% TiO₂ loading. Optimization on the amount of photocatalyst and the pH of solution indicated the reaction favoured 1 g L^?1 of catalysts and at alkaline pH. 10% TiO₂/ZSM-5 also exhibited high stability and reusability up to four reaction cycles. Photocatalytic performance of 10% TiO₂/ZSM-5 was further investigated on photodegradation of malachite green and rhodamine B organic dyes, which showed the photocatalytic efficiency of 73 and 88%, respectively. Superoxide radical, hydroxyl radical, and photogenerated electron were identified as the main active species for MB photodegradation based on the reduction of degradation rate following the addition scavenger molecules.