0.18μm CMOS工艺栅极氧化膜可靠性的衬底和工艺依存性

用斜坡电压法(Voltage Ramp, V-ramp)评价了0.18μm双栅极 CMOS工艺栅极氧化膜击穿电量(Charge to Breakdown, Q_bd)和击穿电压(Voltage to Breakdown, V_bd). 研究结果表明，低压器件(1.8V)的栅极氧化膜(薄氧)p型衬底MOS电容和N型衬底电容的击穿电量值相差较小，而高压器件(3.3V)栅极氧化膜(厚氧)p衬底MOS电容和n衬底MOS电容的击穿电量值相差较大，击穿电压测试值也发现与击穿电量 关键词： 薄氧 可靠性 击穿电压 击穿电量     

Increasing Reliability in Cable-Free Radio LANs Low Level Forwarding in HIPERLAN

Radio LANs are emerging in the computing world. They are supported by distinct configurations: on the one hand radio LANs with base stations and a wired backbone, on the other hand radio LANs implementing Intra-forwarding. Adding a new node in a radio LAN with Intra-forwarding, increases the reliability, while this reliability decreases with ad hoc or hub configurations. This advantage of Intra-forwarding is quantified. Intra-forwarding, as defined in the HIPERLAN standard, is based on a hop-by-hop policy and link check procedures. It is shown how point-to-point packets and broadcast packets are forwarded. The three basic components of Intra-forwarding needed to build and update the Intra-forwarding database are described. The originality of this approach is the use of multipoint relays which enable better scalability. The correctness of the Intra-forwarding protocol is proved and its cost is evaluated.     

多约束下的串、并联混合系统可靠度与冗余度的优化判定模型及算法

本文给出了单目标多约束下串、并联混合系统中 ,由选取重要单元 (重要度最大的单元 )的方法 ,来提高系统可靠度的有效优化判定模型及算法 ,用同样思想给出了串、并联系统中冗余度的优化判定模型及算法     

Application of the finite Hankel transform to a diffusion problem without azimuthal symmetry

The problem treated in this paper concerns calculating the evolution of the pressure in a single-phase, slightly compressible fluid in a porous medium consisting of communicating layers. The fluid is produced through a point sink located on the side of an otherwise sealed cylindrical wellbore. This location of the sink causes the flow around the wellbore to be azimuthally asymmetric.The problem is solved through successive application of Laplace, finite Fourier and finite Hankel transforms. Although apparently straightforward, this approach leads to serious numerical difficulties. The published form of the inversion formula for the finite Hankel transform leads to inaccurate computation for the higher azimuthal modes even with 128 bit arithmetic. An alternative form is developed which enables accurate evaluation of the solution with the more practical 64 bit arithmetic. The technique for two-layer solution presented here can be directly extended to a problem with a larger number of communicating layers. This is the first instance of successful application of the finite Hankel transform to an azimuthally asymmetric diffusion problem.     

SMT互连组件在热循环中的可靠性预计模型

电子设备中表面安装器件和电路基板以及焊接材料的热膨胀系数差异,使得SMT互连组件在热循环条件下产生热膨胀失配,在焊接处产生热应力,在长时间的交变应力的作用下,焊接处遭到疲劳破坏而使设备工作失效,这就是SMT互连组件在热循环条件下的基本失效机理。文中还介绍了美国MIL—HDBK—217F NOTICE Ⅱ公布的表面安装连接组件可靠性预测lSMT模型。给出一系列具有实用价值的参数。     

OPGW的结构简析

主要对光纤复合架空地线(OPGW)的性能可靠性及生产、制造中的问题进行分析探讨     

数字电视播出系统的可靠性研究综述

数字电视播出系统的可靠性直接反映整个系统的质量优劣，是确保能否进行安全、可靠的电视播出的关键。为了保障电视播出的安全与可靠性，必须对硬盘化播控系统进行双机熬备扮和使用有RAID技术的硬盘播出系统的数据备份设计；同时还介绍了数字电视播出播出系统软件的设计要求和数字电视设备的寿命分析。     

具有位相型修理的离散时间可修排队系统

本文研究了具有一般独立输入，位相型修理的离散时间可修排队系统，假定服务台对顾客的服务时间和服务台寿命服从几何分布，运用矩阵解析方法我们给出系统嵌入在到达时刻的稳态队长分布和等待时间分布，并证明这些分布均为离散位相型分布．我们也得到在广义服务时间内服务台发生故障次数的分布，证明它服从一个修正的几何分布．我们对离散时间可修排队与连续时间可修排队进行了比较，说明这两种排队系统在一些性能指标方面的区别之处．最后我们通过一些数值例子说明在这类系统中顾客的到达过程、服务时间和服务台的故障率之间的关系．     

对通信建设项目经济评价方法的改进建议

针对现行《邮电通信建设项目经济评价方法与参数》及经济评价工作存在的不足，提出一些改进建议。     

某军用直流电源的RET方法研究

可靠性强化试验(RET)是一种新兴的试验技术,它使用在产品的设计阶段,用于快速暴露产品的缺陷和薄弱环节。以某军用直流电源为例介绍了可靠性试验方法,并对可靠性强化试验方法的优越性进行了讨论。