红珍珠降糖胶囊中微量元素营养研究

红珍珠降糖胶囊是具有显著降低血糖水平,确定糖尿病患者康复的绿色营养保健食品。通过红珍珠降糖胶囊中Cr、Mn、Cu、Zn、Mg等微量元素的分析测试以及与青海小麦、膳食日摄取量等对比研究,表明红珍珠降糖胶囊富含涉及糖尿病的微量元素,在降低血粮糖水平方面具有十分重要的营养学、功效学作用和意义。     

Statistical mechanics of temporary polymer networks

The statistical theory of temporary polymer networks developed in parts I and II of this work is closed by a discussion on dynamical effects, including comparison with experiments. After a short review of the theory developed in parts I and II we discuss the situation in which a prescribed velocity gradient is imposed on the physical system formed by the temporary network and the solvent. The dynamical equation for the 2nd moments (derived from a generalized bead-spring model) contains the configuration-dependent transition probability, which depends on the second moments in a complex way. An approximate solution of these equations is obtained from a computer program. It shows the experimentally observed behavior, in particular the stress overshoot maximum after a sudden start of the flow.The derivation of the above equations contains simplifying assumptions which, however, leave the essential physics intact. The most important assumptions concern the relaxation time approach and the decay and formation processes. These were supposed to be dilute enough to break up the many-junction processes into one-junction processes. Both assumptions are analogous to frequently used assumptions in Boltzmann's kinetic theory.     

A compact deep-submicron MOSFET gds model including hot-electron and thermoelectric effects

A compact I_ds model with physical drain-conductance (g_ds) modeling for deep-submicron MOSFETs is formulated based on first-principle momentum-/energy-balance equations, which simultaneously includes the hot-electron and thermoelectric effects in a unified compact form with two fitting parameters and one-step extraction. The model has been verified with 0.18-μm experimental data with good g_ds prediction.     

Boosting Photovoltaic Performance for Lead Halide Perovskites Solar Cells with BF4− Anion Substitutions

Composition engineering is a particularly simple and effective approach especially using mixed cations and halide anions to optimize the morphology, crystallinity, and light absorption of perovskite films. However, there are very few reports on the use of anion substitutions to develop uniform and highly crystalline perovskite films with large grain size and reduced defects. Here, the first report of employing tetrafluoroborate (BF₄^?) anion substitutions to improve the properties of (FA = formamidinium, MA = methylammonium (FAPbI₃)_0.83(MAPbBr₃)_0.17) perovskite films is demonstrated. The BF₄^? can be successfully incorporated into a mixed‐ion perovskite crystal frame, leading to lattice relaxation and a longer photoluminescence lifetime, higher recombination resistance, and 1–2 orders magnitude lower trap density in prepared perovskite films and derived solar cells. These advantages benefit the performance of perovskite solar cells (PVSCs), resulting in an improved power conversion efficiency (PCE) of 20.16% from 17.55% due to enhanced open‐circuit voltage (V_OC) and fill factor. This is the highest PCE for BF₄^? anion substituted lead halide PVSCs reported to date. This work provides insight for further exploration of anion substitutions in perovskites to enhance the performance of PVSCs and other optoelectronic devices.     

ANALOG PREDISTORTION LINEARIZER ON REDUCING CORRECTED AMPLITUDE OVERSHOOT

This paper presents a dual-nonlinear branch linearizer for reducing the corrected amplitude overshoot of conventional single nonlinear branch linearizer. Theoretical analysis is carried out, the analysis is verified by simulation, and a prototype of Ka band 25.28-26.08 GHz dual nonlinear branch linearizer is achieved. It indicates that the corrected amplitude overshoot is less than 0.5 dB, the C/I3 improvement is more than 10 dB related to a single carrier IBO 9 dB, when it is linked and tested for 50 W spacebrone Travelling Wave Tube Amplifier （TWTA）.     

PMT overshoot study for the JUNO prototype detector

The quality of PMT signals is crucial for large-size and high-precision neutrino experiments, but most of these experiments are affected by the overshoot of PMT signals from the positive HV-single cable scheme. Overshoot affects the trigger, dead time and charge measurement from a detector. For the JUNO prototype detector, we have performed a detailed study and calculation on PMT signal overshoot to control the ratio of overshoot to signal amplitude to ~1%, with no effect on other PMT parameters.     

Velocity overshoot analysis in SiGe and SiGeC HBT

A velocity overshoot model of ultra-thin-base SiGe and SiGeC HBT is obtained. By deriving the Boltzmann electron temperature equation, 3000?K maxima near the collector-base junction of temperatures are found. Velocities distribution solutions considering velocity overshoot are achieved. Conclusions are that different germanium content percentage decides the maxima of overshoot velocities and base overshoot is observed. SiGeC HBT possesses approximately the same velocities as in SiGe HBT.     

Performance analysis of an integrated scheme in optical burst switching high-speed networks

A new integrated scheme based on resource-reservation and adaptive network flow routing to alleviate contention in optical burst switching networks is proposed. The objective of the proposed scheme is to reduce the overall burst loss in the network and at the same time to avoid the packet out-of-sequence arrival problem. Simulations are carried out to assess the feasibility of the proposed scheme. Its performance is compared with that of contention resolution schemes based on conventional routing. Through extensive simulations, it is shown that the proposed scheme not only provides significantly better burst loss performance than the basic equal proportion and hop-length based traffic routing algorithms, but also is void of any packet re-orderings.     

Sorting of bending magnets for the SSRF booster

The Shanghai Synchrotron Radiation Facility(SSRF)booster ring,a full energy injector for the storage ring,is deigned to accelerate the electron beam energy from 150MeV to 3.5GeV that demands high extraction efficiency at the extraction energy with low beam loss rate when electrons are ramping.Closed orbit distortion(COD)caused by bending magnet field uniformity errors which affects the machine performance harmfully could be effectively reduced by bending magnet location sorting.Considering the affections of random errors in measurement,both ideal sorting and realistic sorting are studied based on measured bending magnet field uniformity errors and one reasonable combination of bending magnets which can reduce the horizontal COD by a factor of 5is given as the final installation sequence of the booster bending magnets in this paper.     

Langevin dynamic simulation of hysteresis in a field-swept Landau potential

Numerical simulations are done of Langevin dynamics for a uniform-orderparameter, field-swept Landau model,= –|a/2|m ²+|b/4|m ⁴–mh(t) , to study hysteresis effects. The field is swept at a constant rateh(t)=h(0)+ht. The stochastic jump values of the field {h_J from an initially prepared metastable minimumm(0) are recorded, on passage to a global minimum m(). The results are: (a) The mean jump¯h _J(h) increases (hysteresis loop widens) with h, confirming a previous theoretical criterion based on rate competition between field-sweep and inverse mean first-passage time (FPT); (b) The broad jump distribution(h _J,h) is related to intrinsically large FPT fluctuations ( ²–²)/ ² O(1), and can be quantitatively understood. Possible experimental tests of the ideas are indicated.