异构云DCN中绿色虚拟算法设计

为进一步提升异构云数据中心网络(DCN)动态管理的科学性,在总结当前主流研究局限性的基础上构思一种基于全局相对最优化的绿色虚拟算法.算法综合考虑虚拟机迁移过程中可能涉及到的诸多客观因素,通过科学地规划时间门限、主机筛选策略、以及精度比较机制对虚拟机实施高效的迁移.数据考察表明,所部署的算法不仅可快速精确地物色到最适宜的...     

伪随机码匹配滤波器的抗频偏特性

伪随机码匹配滤波器常用作扩频通信中的解扩解调器,其相关性能直接关系到扩频系统性能的优劣。文中通过数学推导和仿真实验方法分析了频偏对其相关特性的影响。     

Compact 2.5 Gb/s Burst‐Mode Receiver with Optimum APD Gain for XG‐PON1 and GPON Applications

This letter presents a compact 2.5 Gb/s burst‐mode receiver using the first reported monolithic amplifier IC developed with 0.25 …m SiGe BiCMOS technology. With optimum avalanche photodiode gain, the receiver module can obtain a fast response, high sensitivity and wide dynamic range, satisfying the overhead timing and various power specifications for a 2.5 Gb/s next‐generation passive optical network (PON), as well as a legacy 1.25 Gb/s PON in the upstream.     

一种TR-UWB系统的改进型自相关接收机性能分析

TR-UWB系统采用自相关接收检测技术作为一种非最优接收机,其结构简单、性能优良。对TR-UWB系统的自相关接收检测技术进行改进,通过合并有限数目多径信号以提高接收信号能量,同时对接收信号做平均处理抑制噪声,从而提高系统性能。采用高斯近似法得到系统的误码率,最后在多径信道环境下进行仿真,验证了接收机性能的改进和误码率分析的正确。     

The Fast Blind Equalization Algorithm with Global Convergence

ＴｈｅＦａｓｔＢｌｉｎｄＥｑｕａｌｉｚａｔｉｏｎＡｌｇｏｒｉｔｈｍｗｉｔｈＧｌｏｂａｌＣｏｎｖｅｒｇｅｎｃｅＬｕＪｕｎＬｉＴｏｎｇ（ＩｎｓｔｉｔｕｔｅｏｆＩｎｆｏｒｍａｔｉｏｎａｎｄＥｎｇｉｎｅｅｒｉｎｇｏｆＰＬＡ，Ｚｈｅｎｇｚｈｏｕ４５０００２）Ａ...     

Robust Non-Fragile Guaranteed Cost Control for Nonlinear Time Delay Discrete-Time Systems Based on T-S Model

This paper concerns the robust non-fragile guaranteed cost control for nonlinear time delay discrete-time systems based on Takagi-Sugeno （T-S） model. The problem is to design a guaranteed cost state feedback controller which can tolerate uncertainties from both models and gain variation. Sufficient conditions for the existence of such controller are given based on the linear matrix inequality （LMI） approach combined with Lyapunov method and inequality technique. A numerical example is given to illustrate the feasibility and effectiveness of our result.     

土壤源热泵在合肥某工程中的应用

介绍了土壤源热泵的工作原理,探讨了土壤源热泵空调应用于中央空调系统的设计方法,以及其主要部件地热换热器的埋管方式、结构、管材、运行等特点。选取几种常用的冷热源系统与土壤源热泵系统进行比较分析,参考合肥地区的能源价格,计算各方案的运行成本,用动态费用年值法对各方案的经济性进行了评价。     

Performance enhanced down-stream signalling for next generation long-reach 10 Gbit/s passive optical networks

In this paper, we have analyzed the signal processing methods both in digital and optical domain to enhance the transmission performance of downstream signalling in long reach passive optical networks (LR-PONs). The impact of non-linear (NL) equalization through signal processing, i.e. Volterra Equalization (VE), Digital Backpropagation (BP) and Optical Phase Conjugation with Non-linearity Module (OPC-NM) is investigated, in 10 Gbit/s (XG) DP-QPSK long-reach wavelength division multiplexed (WDM) PONs without midspan repeaters over 120 km standard single mode fibre (SMF) link for down-stream signals. Due to the compensation of optical Kerr effects, the sensitivity penalty is reduced to 2 dB by BP algorithm, 1.5 dB by VE algorithm and 2.69 dB by OPC-NM. Moreover, with the implementation of NL equalization technique we are able to get the transmission distance of 126.6 km SMF for the 1:1024 split-ratio at 5 GHz channel spacing in the non-linear region. Furthermore, the concept of super passive optical network (S-PON) is also evaluated, which involves a repeater stage consisting of optical amplifiers, to study the feasibility for receiver side signal processing and simplification.     

基于全网业务模型和蒙特卡洛仿真的电力通信网可靠性评估

传统的电力通信网可靠性研究基于网络的拓扑结构和业务流向,没有考虑电力通信业务复杂的组网方式。基于烟台电力通信网在运业务的实际情况,提出了复杂的系统级仿真模型。在此基础上,提出了光缆可靠度和设备可靠度的概念。另外,本文提出了可靠性破坏代价的概念,通过蒙特卡洛系统级仿真,给出电力通信网全网的可靠性数据。     

Structural Fault Based Specification Reduction for Testing Analog Circuits

Specification reduction can reduce test time, consequently, test cost. In this paper, a methodology to reduce specifications during specification testing for analog circuit is proposed and demonstrated. It starts with first deriving relationships between specifications and parameter variations of the circuit-under-test (CUT) and then reduces specifications by considering bounds of parameter variations. A statistical approach by taking into account of circuit fabrication process fluctuation is also employed and the result shows that the specification reduction depends on the testing confidence. A continuous-time state-variable benchmark filter circuit is applied with this methodology to demonstrate the effectiveness of the approach.