Adaptive Constrained Control of Unknown Strict Feedback Nonlinear Systems With Dead Zone Input北大核心CSCD

研究了具有死区输入的预设约束未知高阶严格反馈非线性系统的控制问题,提出了一种基于免疫函数的自抗扰预设漏斗约束自适应控制策略。首先,针对系统内部的未知问题,采用免疫函数与扩张状态观测器结合对系统内部未知项进行观测;其次,通过Lyapunov方法与漏斗控制相结合设计控制器,使得跟踪误差能够维持在预先设定的漏斗约束范围内;同时,利用双曲正切函数速率变化快这一特性设计自适应控制律,引入指令滤波器避免反步法中重复求导问题,分析证明了闭环系统所有信号的有界性。仿真实例表明了控制方法的有效性。     

Some problems of linear differential equations on abstract spaces and unbounded perturbations of linear operator semigroup

This paper is a survey for development of linear distributed parameter system. At first we point out some questions existing in current study of control theory for the L^p linear system with an unbounded control operator and an unbounded observation operator, such as stabilization problem and observer theory that are closely relevant to state feedback operator. After then we survey briefly some results on relevant problems that are related to solvability of linear differential equations in general Banach space and semigroup perturbations. As a principle, we propose a concept of admissible state feedback operator for system (A, B). Finally we give an existence result of admissible state feedback operators, including semigroup generation and the equivalent conditions of admissibility of state feedback operators, for an L^p well-posed system.     

一种高增益的宽带低噪声放大器的设计

采用SANAN公司的0.25μm E-Mode pHEMT工艺,基于ADS仿真,设计了一款工作频率为2.0～4.2 GHz的两级级联的宽带LNA芯片。芯片采用电阻偏压的方式,实现了3.3 V单电源供电。同时,设计了一种改进型的RLC并联负反馈结构,实现了宽带匹配。仿真结果表明,该LNA在2.0～4.2 GHz频段内,最大增益为30.9 dB,增益平坦度为±0.6 dB左右,输入回波损耗小于-9 dB,输出回波损耗小于-12 dB;噪声系数为(1.2±0.14) dB;系统稳定性因子K在全频带内大于2.8;芯片面积为0.78 mm×2.2 mm。     

Photothermal Heating-Assisted Superior Antibacterial and Antibiofilm Activity of High-Entropy-Alloy Nanoparticles

Antibacterial elements and non-contact heating abilities have been proven effective for antibacterial and antibiofilm activities, but it remains a challenge to integrate both within one material. Herein, assisted by the high-entropy effect, FeNiTiCrMnCu_x high-entropy alloy nanoparticles (HEA-NPs) with excellent photothermal heating properties for boosting antibacterial and antibiofilm performances are synthesized. Benefitting from the synergetic effect of copper ions released and thermal damage by the HEA-NPs, more reactive oxygen species (ROS) are generated, leading to the rupture of the cell membranes and the eradication of the biofilms. As a result, the antibiofilm efficiency (400 µg mL⁻¹) of the mostly optimized FeNiTiCrMnCu_1.0 HEA-NPs in the marine nutrient medium, which is the worst-case scenario for the antimicrobial material, can be improved from 81% to 97.4% under 30 min solar irradiation (1 sun). The present study demonstrates a new strategy for effectively treating marine microorganisms that cause biofouling and microbial corrosion using HEA-NPs with photothermal heating characteristics as an antibacterial auxiliary.     

新型热反应大分子单体的合成与表征

溶液法合成了一些低分子量的羟端基低聚苯醚砜,并由相转移催化剂将之转为热反应大分子单体——α,ω-双甲基丙烯酸聚苯醚砜酯;用FTIR、~1H-NMR对其结构进行了表征,GPC、VPO对其分子量进行了分析和测定;用DSC、DTA对聚苯醚砜双烯大分子单体的转变温度、热反应过程进行了测定和分析。     

Thermal behaviour of bisitaconimide and reactive diluent blends

Thermal behaviour of blends based on N,N'-bis(4-itaconimidophenyl) ether (IE) and 4,4'-bis(4-allyl-2-methoxyphenoxy) benzophenone (R₁) or 4,4'-bis(2-allylphenoxy) benzophenone (R₂) are described in this paper. The reactive diluent content was varied from 5-50% (mass/mass) in these blends. A decrease in the melting point and exothermic peak temperature was observed with increasing mass percent of reactive diluent. Thermal stability of blends was affected at high mass percentage of reactive diluents. This revised version was published online in August 2006 with corrections to the Cover Date.     

Morphology and thermal properties of a PC/PE blend with reactive compatibilization

Reactive compatibilization of immiscible polymers is becoming increasingly important and hence a representative study of a polycarbonate/high density polyethylene (PC/HDPE) system is the focus of this paper. A grafted copolymer PC‐graft‐ethylene‐co‐acrylic acid (PC‐graft‐EAA) was generated as a compatibilizer in situ during processing operation by ester and acid reaction between PC and ethylene‐acrylic acid (EAA) in the presence of the catalyst dibutyl tin oxide (DBTO). As the polyethylene (PE) matrix does not play any part during the synthesis of the copolymer and since PC and EAA are also immiscible, to simplify the system, the influence of this copolymer formation at the interface between PC and EAA on rheological properties, phase morphology, and crystallization behavior for EAA/PC binary blends was first studied. The equilibrium torque increased with the DBTO content increasing in EAA/PC blends on Haake torque rheometer, indicating the in situ formation of the graft copolymer. Scanning electron microscopy (SEM) studies of cryogenically fractured surfaces showed a significant change at the distribution and dispersion of the dispersed phase in the presence of DBTO, compared with the EAA/PC blend without the catalyst. Differential scanning calorimetry (DSC) studies suggested that the heat of fusion of the EAA phase in PC/EAA blends with or without DBTO reduced with the formation of the copolymer compared with pure EAA. Then morphological studies and crystallization behavior of the uncompatibilized and compatibilized blends of PC/PE were studied as functions of EAA phase concentration and DBTO content. Morphological observations in PC/PE blends also revealed that on increasing the EAA content or adding the catalyst DBTO, the number of microvoids was reduced and the interface was intensive as compared to the uncompatibilized PC/PE blends. Crystallization studies indicated that PE crystallized at its bulk crystallization temperature. The degree of crystallinity of PE phase in PC/PE/EAA blends was also reduced with the addition of EAA and DBTO compared to the uncompatibilized blends of PC/PE, indicating the decrease in the degree of crystallinity was more in the presence of PC‐graft‐EAA. Copyright © 2007 John Wiley & Sons, Ltd.     

SYNTHESIS OF CONDUCTIVE POLYANILINE VIA OXIDATION BY MnO2

A unique process of chemical oxidation polymerization of aniline using manganese dioxide (MnO2) as the oxidizing agent in an aqueous medium is described. The reaction between aniline and MnO2 follows a mechanism by which the organic monomer is oxidized while the metal oxide undergoes reductive dissolution. The effects of the amount of oxidizing agent and aniline, pH and temperature of the reactive system, type of acid on the yield and conductivity of polyaniline are discussed. The resulting polyaniline was characterized by [R and UV-Vis spectrometry. Polyaniline with a conductivity of 12.5 S/cm was obtained using 0.033 tool of aniline oxidized by 0.023 tool MnO2 in the presence of 100 mL of 2.7 mol/L HCI at 25℃ for 4 h.     

The quality of leadership (QL): the EFQM leadership criterion in relation to the 360° feedback evaluation method

The European Foundation for Quality Management (EFQM) integral quality management model covers nine issues: five so-called enabler criteria and four so-called result-oriented criteria. The first enabler criterion concerns leadership and covers all kind of strategic management aspects. However, directly or indirectly, the leadership of the board of directors or its individual members is characterized and scored. An even more explicate technique, originated in a totally different way, is the 360° feedback evaluation method. In this paper both methods are compared and practiced on various individuals. A checklist was developed to facilitate scoring in the EFQM leadership submodel. Both methods, although from a different origin, could be linked easily, covered very similar aspects and gave results that were in excellent agreement with each other. The scoring showed almost identical results, supporting in large the use of the integral EFQM model. Received: 25 May 2002 Accepted: 17 July 2002 Presented at the European Conference on Quality in the Spotlight in Medical Laboratories, 7–9 October 2001, Antwerp, Belgium Correspondence to H. M. J. Goldschmidt