低温卷取钢坯头部和尾部跟踪智能控制技术的研究

随着现代热连轧生产工艺的不断提高,对热轧卷取机的控制系统也提出了更高要求。基于改进卷取带钢低温跟踪检测技术和减小咬钢时的头部打滑的目的,采用了智能控制方案能够动态调整控制器参数的方法,通过MAT-LAB/SIMULINK系统仿真的试验,实现了带钢在200~300℃可以正常卷取,批量生产出热轧双相钢。     

Result of search for low velocity exotic particles

The L3＋C experiment, taking advantage of the L3 muon magnetic spectrometer, measured the spatial tracks of charged cosmic ray particles to obtain rigidity as well as velocity. One possible low velocity exotic particle is observed. The existing uncertainties are discussed, and the flux upper limit of the low velocity exotic particles from this observation is deduced based on the assumption of a null observation. The result is 6.2×10^-10 cm^-2·s^-1·sr^-1 at 90% confidence level in the velocity range from 0.04c to 0.5c.     

不同因素对可调节人工晶体屈光调节力的影响

首先以Hwey-Lan Liou眼模型为基础，根据等效性原则，保持该眼模型中自然晶状体屈光度不变，对无穷远点成像。然后利用ZEMAX实现光线追迹的方法，将自然晶状体替换为可调节人工晶状体（accommodative intraocular lens，AIOL），结合对人眼成像质量影响的分析，研究了AIOL在眼内的移动度、材料、中心厚度、结构、光学面非球面性等因素对其屈光调节力的影响。结果表明:AIOL移动度对其调节力贡献最大,材料、中心厚度、结构对调节力基本无影响；具有非球面光学面的AIOL调节力相对较大。     

A new interpretation of an event attributed to a magnetic monopole

An alternate and a new interpretation is given for the event attributed to a magnetic monopole by Price and coworkers found in an emulsion plastic sandwich stack flown from Sioux City, Iowa, USA on 18 September 1973. The electron pick-up and stripping cross-sections of nuclei ofZ∼70–80 andv∼0.6–0.7c in Lexan polycarbonate are calculated using the formulae given by Nikolaev. It is shown that the corresponding mean free paths are of the order of thickness (∼250μ) of Lexan plastic sheets used by them. In such a case asnapshot of these processes is believed to have been observed in plastic sheets. Monte-Carlo simulations of the event have been made for three values of charges at the top of the main Lexan stack, namelyZ=83, 78 and 70 respectively. The event is thus interpreted as a cosmic ray nucleus ofZ=70–83 andv=0.6–0.7c losing and capturing electrons (mainly the latter) as it passes through the stack. The probability of the occurrence of such an event is estimated by several methods.     

Si1-xGex/Si应变材料的生长及热稳定性研究

利用分子束外延（MBE）技术生长了Ge组份为0.1-0.46的Si1-xGex外延层。X射线衍射线测试表明，SiGe/Si异质结材料具有良好的结晶质量和陡峭界面，其它参数与可准确控制。通过X射线双晶衍射摆曲线方法，研究了经700℃、800℃和900℃退火后应变SiGe/Si异质结材料的热稳定性。结果表明，随着退火温度的提高，应变层垂直应变逐渐减小，并发生了应变弛豫，导致晶体质量退化；且Ge组分越小，Si1-xGex应变结构的热稳定性越好；室温下长时间存放的应变材料性能稳定。     

The work function of hydrothermally synthesized UO2 and the implications for semiconductor device fabrication

The photoelectric work function of nearly stoichiometric (111) and (100) hydrothermally grown UO₂ was measured to be 6.28 ± 0.36 eV and 5.80 ± 0.36 eV, respectively. Candidate metals for electrical contacts are identified for both rectifying and non‐rectifying contacts based on work function, lattice compatibility, and electrical conductivity.     

百瓦级高亮度光纤耦合半导体激光模块的研制

用3只976 nm半导体激光短列阵作为子模块,研制出连续工作的百瓦级高亮度光纤耦合模块。首先,利用光束转换器将每个半导体激光短列阵进行光束整形;然后采用空间复用技术将3个半导体激光短列阵在光参数积小的方向上叠加,并利用倒置伽利略望远镜作为扩束器进一步压缩发散角;最后利用优化结构的透镜组将激光聚焦到芯径200 μm,数值孔径为0.22的光纤中。测量结果显示:聚焦后激光的发散角为24.8°,焦平面的光斑尺寸为175.2 μm;耦合后测量光纤出光功率可达107 W,对应亮度为2.23 MW/(cm²·sr),达到了国内利用列阵进行光纤耦合的领先水平;在工作电流为52.5 A时,电光转换效率为43.1%,远高于全固态等激光器;最后测量本模块在不同驱动电流时的光谱,并以此计算出模块的热阻为1.29 K/W,说明它的散热性能良好。结果表明,本光纤耦合模块适合应用于泵浦光纤激光器、医疗和激光加工等领域。     

羊八井50m~2RPC地毯性能研究YBJ-ARGO合作组(英文)

利用羊八井５０ｍ２ＲＰＣ地毯（ＹＢＪ－ＡＲＧＯ实验原型）的测试数据对其性能进行了分析研究,包括原初粒子方位角分布、天顶角分布、地毯的角分辨、探测时间系统误差对方位角分布的正弦调制、探测时间系统误差的离线修正、几何不对称的小型地毯探测器上原初粒子到达方向重建误差造成的方位角分布的不均匀性等．     

一种新化合物K2Ti8O15纳米线

钛酸钾晶须通常是直径和长度在微米量级的无机晶须 ,可用Ｋ2 Ｏ·ｎＴｉＯ2 表示其组成 ,ｎ =1,2 ,4 ,6 ,8,[1] .六钛酸钾晶须具有耐高温、耐腐蚀、纤维拉伸强度高、导热系数小、红外反射率高 ,硬度低的特点 .在民用及工业方面有很多应用 .如催化剂载体、离子吸附交换材料、高温过滤器、绝热材料、耐摩擦材料等[2～ 5] .钛酸钾纳米线的合成尚未见报道 .我们在用电弧产生的Ｎ2 等离子体热解焦油时 ,生成了一种直径 9～ 2 0ｎｍ长约几百纳米线 .Ｘ射线能谱定量分析表明这种纳米线化学组成为Ｋ2 Ｔｉ8Ｏ15,是一种新的非化学计量化合物 .试验装…     

NaAlH4 表面Ti催化空间构型和X射线吸收光谱: Car-Parrinello分子动力学和密度泛函理论研究

通过采用Car-Parrinello分子动力学方法对掺杂Ti前后的NaAlH₄(001)2×2×1超晶胞表面晶体在333 K(60 ℃)温度条件催化脱氢的空间构型做了理论研究,发现掺杂Ti的合金中AlH₄团的其中两个Al—H键长分别从约1.64 (1 =0.1 nm)增大至1.74和1.93 ,而未掺杂合金表面中AlH₄团的4个Al—H键长基本不变,这意味着掺杂Ti相对未掺杂的合金更易于放氢.但在模拟温度条件下并未发现Ti-Al成键趋