New HPLC-chiral stationary phases for enantiomeric resolution of sulfoxides and selenoxides

Summary Enantiomers of several sulfoxides and some selenoxides can be easily separated by using a new chiral stationary phase (CSP-DACH-DNB) containing the 3,5-dinitrobenzoyl derivative of R,R-(-)1,2-diamino-cyclohexane as selector, covalently bonded to the siliceous matrix. The easy operative conditions and the high enantioselectivity values (α) allow a direct transfer of the analytical separations to a semi-preparative and preparative scale.     

Fixed collision rate back-off scheme for collision resolution in wireless networks

This investigation proposes a fixed collision rate (FCR) back-off algorithm for wireless networks. The proposed scheme takes advantage of the central unit (CU) in a wireless network to broadcast a common back-off window size to all the users, significantly alleviating the unfairness of bandwidth utilization in conventional binary exponential back-off (BEB) algorithms. It is shown that, when maximum throughput is achieved, collision rate is almost a constant for any traffic load. In the operation of the FCR, the CU dynamically adjusts the back-off window size to keep the collision rate at a constant level for maximum throughput. Simulation results demonstrate that the unfairness of bandwidth utilization in the BEB is significantly lessened and the throughput can be maintained at e^-1≈0.368 when the number of users approaches infinity. The capture effect even further improves system performance.     

Spectroscopic and X-ray diffraction study of high Tc epitaxial YBCO thin films obtained by pulsed laser deposition

We report spectroscopic characterization of epitaxial YBCO thin films grown on LaAlO₃ by pulsed laser deposition. Raman spectroscopy and spectroscopic ellipsometry were used for film characterization and the results were correlated with X-ray diffraction measurements. The mentioned techniques allowed us to analyze crystallographic, micro-structural, and morphological properties of YBCO thin films. We also demonstrated that relatively low resolution Raman spectroscopy and spectroscopic ellipsometry are reliable techniques for a rapid and non-destructive characterization of epitaxial YBCO thin films.     

Analysis of Resolution of Bistatic SAR

In this paper, the spatial resolutions at different directions of bistatic synthetic aperture radar （BiSAR） have been derived from the ambiguity function. Compared with monostatic signal to noise ratio, BiSAR＇s resolutions of a fixed point target are varying with slow time since BiSAR system is space-variant. Constraints for the assumption of space-invariant bistatic topology are proposed in the paper. Moreover, under the assumption of invariance, the change of resolutions at different point in the image scene is taken into account, and we have specified two key parameters that affect resolutions directly and analyzed the way how they influence on the resolutions.     

射束有效宽度与成像系统MTF关系的研究

射线成像系统的射线有效宽度是评定系统成像分辨率的重要成像指标。以试验的方法,通过测试系统成像的MTF,通过对成像分辨率与射线有效宽度的关系进行研究,为射线数字成像(DR)及工业CT系统设计提供了参考。     

基于Gibbs模型的提高图像分辨率方法

在提高图像分辨率过程中,选择合适的成像模型是获得高分辨率图像的一个关键因素。提出一种基于最大后验概率、采用Gibbs成像模型,并利用多帧序列图像重构高分辨率图像的方法,充分利用序列图像之间的累加信息,从而快速地获得较其他方法更优的高分辨率图像。     

一种增强型冲突分解算法

冲突分解算法是一种能有效改善无线信道多址接入协议的方式。本文对传统的冲突分解算法——树形冲突分解算法和先到先服务冲突分解算法进行了深入研究和仿真，探讨了这两种算法的优点和不足之处，提出了一种增强型的冲突分解算法（Enhanced Splitting Algorithm，ESA）。该算法继承了树形冲突分解算法和先到先服务算法的优点，不仅考虑了碰撞分组产生的时间，还考虑了分组的产生间隔，从而有效地提高了冲突分解算法的性能。仿真结果显示ESA算法是一种可行的算法。     

利用机载SAR图像仿真星载SAR图像

简要介绍了现有的SAR图像仿真方法,提出了一种利用机载SAR图像进行星载SAR图像仿真的方法,对仿真原理进行了阐述,着重研究了图像几何特性、空间分辨率、噪声特性、辐射特性仿真的数学模型及设计流程,最后进行了计算机仿真。结果分析表明得到的仿真图像具有较高的逼真度,该星载SAR图像仿真方法是有效的。     

调频步进信号处理方法探讨

调频步进信号是一种新的高距离分辨率信号。文章首先简要阐述了线性调频信号的处理过程；其次对比步进频率、线性调频步进信号的处理过程，得到一种新的处理方法-合成处理法，最后通过仿真论证其正确性。