The effect of construction material, contents and room geometry on the sound field in dwellings at low frequencies

An experimentally validated finite element method is used to model the sound level in rooms at low frequencies. It is demonstrated that the dimensions of rectangular rooms strongly influence the sound pressure level difference. Additional factors were investigated which are not normally considered in the frequency range where diffuse sound field conditions can be assumed. Three effects were investigated: room damping due to wall vibrations, furniture, the effect of small deviations from simple rectangular shapes. It is confirmed by field measurements that the vibrations of masonry walls and floors introduce less damping than surfaces of lightweight construction. Assigning to the FE model a damping equivalent to a surface absorption of 0.02 reproduces the effect of walls of heavyweight construction. Damping equivalent to a surface absorption of 0.15 reproduces the effects of plastered timber-frame walls, floors and ceilings. The work was briefly extended to a room pair built with heavyweight and lightweight material of construction. The modification of the shape of the room frequency response highlights well the effect of material of construction. In-situ and laboratory measurements show that furniture has little effect on steady-state room response below 100 Hz. Modelling a wall recess smaller than 0.5 m improved the agreement between prediction and measurements but the assumption of a simple rectangular room remains appropriate.     

FeCoB-SiO2磁性纳米颗粒膜的微波电磁特性

采用交替沉积磁控溅射工艺制备了超薄多层的FeCoB SiO2 磁性纳米颗粒膜 .利用x射线衍射仪、扫描探针显微镜、透射电子显微镜分析了薄膜的微结构和形貌特征 .采用振动样品磁强计、四探针法、微波矢量分析仪及谐振腔法测量薄膜试样的磁电性能和微波复磁导率 .重点对SiO2 介质相含量、薄膜微结构对电磁性能产生重要影响的机理做了分析和探讨 .结果表明 :这类FeCoB SiO2 磁性纳米颗粒膜具有良好的软磁性能和高频电磁性能 ,2GHz时的磁导率 μ′高于 70 ,可以应用于高频微磁器件或微波吸收材料的设计     

光强一定时饱和光电流随入射光频率的变化关系辨析

对光电效应实验中饱和光电流随入射光频率变化关系的几种谬误进行了辨析，给出了光强一定时饱和光电流随入射光频率变化的正确规律并作了解释。     

浅谈防空夜视装备的发展

针对我军现代夜间反空袭作战的制约瓶颈——缺乏夜视装备，提出在预警领域采用被动红外周视扫描系统，在先进的火控领域采用制冷式红外热成像系统．在老式的防空火控系统上利用微光和非制冷红外技术进行改造的方案比较符合我国国情，也是比较现实和可行的。     

Focused ion beam Moiré method

A focused ion beam (FIB) Moiré method is proposed to measure the in-plane deformation of object in a micrometer scale. The FIB Moiré is generated by the interference between a prepared specimen grating and FIB raster scan lines. The principle of the FIB Moiré is described. The sensitivity and accuracy of deformation measurement are discussed in detail. Several specimen gratings with 0.14 and 0.20 μm spacing are used to generate FIB Moiré patterns. The FIB Moiré method is successfully used to measure the residual deformation in a micro-electro-mechanical system structure after removing the SiO₂ sacrificial layer with a 5000 lines/mm grating. The results demonstrate the feasibility of this method.     

多自由度测试技术的发展

介绍目前较常用的多种多自由度测试技术，给出每种测试技术的测试原理和应用场合，比较各种技术的优缺点和适用范围，讨论该技术发展的方向。     

液晶电控效应的实验研究

详细阐述了液晶的电光效应,介绍了利用分光光度计测量液晶透射比的方法。通过改变加在液晶盒上的电压大小及其频率高低,详细测量了液晶的透射比。通过做图分析了液晶的电控双折射效应,得出液晶的透射比随所加电压的大小和频率的高低而变化,以及液晶的阈值电压随频率的增高而减小的规律,这对液晶器件的设计与研究均具有一定的参考价值。     

论给水变频控制系统在100MW机组中的应用

引用某热电厂100MW机组给水系统的变频改造实际运行和测试结果，证明在电厂给水系统中应用给水变频控制系统进行改造是切实可行的。不仅可以有效改善系统自动化水平和控制品质，而且可以取得良好的经济效益。     

建立湖州广电网络信息业务平台的设想

叙述在数字电视平台上建立广电网络信息业务平台的设想,并提出建立湖州广电网络信息业务平台的几点看法。     

MPEG-4流媒体技术及其实现方法

详细地介绍了一种基于MPEG-4压缩的嵌入式网络流媒体采集、传输和控制应用系统的设计与实现技术。该嵌入式平台采用203 MHz的ARM920T内核处理器S3C2410B,嵌入式操作系统采用Linux操作系统,用户可在这个系统平台上进行自主软件开发。视频采集模块采用TI公司的TVP5145,视频压缩芯片采用硬压缩W IS GO7007B进行处理,将Y:Cb:Cr格式的视频流转换为MPEG-4编码。