低电平扫描电流高强辐射场试验方法研究

低电平扫描电流试验(LLSC)是飞机高强辐射场(HIRF)试验的一部分,其实质是在2~400 MHz 频段 内对飞机进行电磁辐照,以确定外部HIRF 环境与设备线束感应电流之间的传递函数。基于RTCA/ DO-160G 和SAE ARP5583A 标准建立HIRF 测试环境,通过对AC312E 直升机开展低电平扫描电流试验,得到了线束传递函数随频 率、天线极化方式、电磁辐照方向、线束布置的变化规律并分析了其影响机理。结果表明:发射天线以不同极化方式 辐照机体时,不同布置的线束其传递函数有一定差别;发射天线以垂直极化在0°方向辐照时,行李舱附近右发动机 控制单元(EECUR)线束的传递函数比位于驾驶舱的座舱显示器(MFD)线束的传递函数要小;发射天线以垂直极化 方式在不同方向辐照机体时,EECUR 线束在某些频段下在右侧90°方向辐照比左侧270°方向辐照的传递函数要大。 所得结论可为直升机适航符合性验证和低电平扫描电流试验的开展提供参考与支撑。     

光电导太赫兹源回路电感对其辐射特性的影响

光电导太赫兹源（Photo-Conductive Antenna,PCA）已广泛用于太赫兹时域光谱系统（THz-TDS）。在THz-TDS系统中,处于偏置状态的PCA被飞秒激光触发因光生载流子,在偏置电场下的加速运动而向自由空间辐射太赫兹波,同时在PCA偏置回路中形成脉冲电流。通常给PCA加载偏置电压的回路有不同结构的电路设计,导致PCA装架的基板回路不可避免地存在一定电感,由此引起的电磁惯性会显著影响回路中脉冲电流的脉宽,电流脉冲的脉宽会随回路电感的增大而展宽。那么PCA回路电感是否会影响PCA向自由空间辐射THz波的特性,这是设计PCA基板电路面临的问题所在。本文尝试在PCA回路中加入不同电感值的电感元件,通过实验测试了PCA辐射THz波的时域波形和频谱,结果表明,PCA回路电感的数值对PCA辐射THz波没有明显影响,从而对不同场合应用的PCA基板结构和电路设计提供了实验基础。     

CMOS图像传感器辐照损伤效应仿真模拟研究进展

CMOS图像传感器(CIS)工作在空间辐射或核辐射环境中遭受的辐照损伤问题备受关注。对CIS辐照损伤效应进行仿真模拟研究有助于深入揭示辐照损伤机理,进而开展抗辐射加固设计,有效提升CIS抗辐照能力。文章通过梳理国内外开展CIS辐照损伤效应仿真模拟研究方面的进展情况,结合课题组已开展的电子元器件辐照效应仿真模拟和实验研究基础,从CIS器件建模、时序驱动电路建模、辐照损伤效应建模、仿真模拟结果校验等方面探讨了CIS辐照损伤效应的仿真模拟方法,分析总结了当前CIS辐照效应仿真模拟研究中亟待解决的关键技术问题。     

腔靶X射线辐射对称特性实验观测

在“神光”装置上用两种特殊结构的实验靶型,通过两个不同方位的诊断孔观测腔内壁Ｘ光再辐射的空间能谱结构和Ｘ光辐射总量,分别研究了与激光第一打击面完全对称和不对称的腔内壁（两个被观测位置相差９０°）Ｘ光辐射能谱和辐射能量的对称性,并对测量结果进行了简要的分析讨论．     

Classical fluids of negative heat capacity

It is shown that new parametersX can be defined such that the heat capacity C_xT(S/T)_x is negative, even when the canonical ensemble [i.e., at fixed T=(U/S)_Y and YX] is stable. This implies an extension of the classical theory of polytropes from ideal gases to general fluids. As examples of negative heat capacity systems we treat blackbody radiation and general gas systems with nonsingular _T. For the case of a simple ideal gas we even exhibit an apparatus which enforces a constraint X(p, V)=const that makes C_x<0. We then show that it is possible to infer the statistical mechanics of canonicallyunstable systems-for which even the traditional heat capacities are negative-by imposing constraints that stabilize the associated noncanonical ensembles. Two explicit models are discussed.     

Thermoanalytische Charakterisierung Strahlengehärteter Polymerfilme

Thermo-oxidative and thermo-mechanical stabilities of radiation-cured acrylates and epoxides were examined by TG, DMA and DSC.The polymeric trifunctional acrylates PETIA, TMPTA and THEIC displayed the highest temperatures of onset of degradation. The high crosslinking density of the films resulted in an almost temperature-independent complex E-modulus, as measured by DMA. With increasing degree of ethoxylation or propoxylation of the monomers, decreases in thermal stability and strength were found. For difunctional polymeric acrylates and epoxides, the glass transition temperature was measured.The average degree of curing of UV-cured epoxy films can be determined from the temperature of the maximum in the loss modulus (E_max.This revised version was published online in November 2005 with corrections to the Cover Date.     

Radiation-induced polymerization of methyl methacrylate in microemulsion with high monomer content

γ-Ray-induced polymerization of methyl methacrylate was conducted in a microemulsion stabilized by a mixture of sodium of 12-acryloxy-9-octadecenoic acid (AOA) and sodium dodecyl sulfate (SDS) with various weight ratios at room temperature. The experimental data showed that the mixture of AOA and SDS with a weight ratio 2 was an efficient surfactant system for the microemulsion containing 38.6 wt% MMA and 5.5 wt% surfactant. The effects of MMA concentration and dose rate on the polymerization kinetics and particle size are discussed.     

微波固相法合成钠快离子导体Na5YSi4O12

应用微波方法合固相反应难于制备的Ｎａ５ＹＳｉ４Ｏ１２纯相，讨论了微波合成条件对产物的影响，与溶胶－凝胶法相比，微波法反应速率快，选择性强，合成的样品具有特异的聚集态，缺陷和微结构，从而导致离子导电活化能下降。     

A new poly(2-hydroxy-3-phenoxypropylacrylate, 4-hydroxybutyl acrylate, diethyl maleate) membrane controlled clonidine linear release in the transdermal drug delivery system

Oral clonidine, used as an antihypertensive, can result in some side effects such as dry mouth, drowsiness, dizziness and sedation; thus, clonidine transdermal drug delivery (TDD) was considered. Use of the controlled release membrane was one of the methods in TDD systems to regulate the permeation properties. A new type of copolymer membrane that controlled clonidine linear release in TDD system was synthesized by UV radiation. This membrane consisted of three monomers: 2-hydroxy-3-phenoxypropylacrylate, 4-hydroxybutyl acrylate and diethyl maleate. The membrane had both fine permeation properties and perfect physical properties when three monomers were in the weight ratio of 4:4:2; this type of membrane was chosen as an optimized membrane. It was found that the membrane controlled clonidine zero-order release, the permeation rates decreased with the thicknesses of membranes increasing, and the permeation rates were linearly dependent on the square root of the concentration of clonidine. Furthermore, the optimized membranes were characterized by FTIR, DSC and SEM.