基于指标验证法的移动用户定量预测方法

针对移动用户发展预测,本文在传统数学预测方法的基础上,提出一种新的指标验证法。该方法充分考虑了指标的控制因素,将ARPU、MOU及资费纳入用户预测的整体考虑,从而达到对移动用户的预测更加合理准确。本文最后以实例验证了该方法的合理性和准确性。     

Development of Improved High-Performance Liquid Chromatography Method for the Determination of Residual Caprylic Acid in Formulations of Human Immunoglobulins

Quality control of human immunoglobulin formulations produced by caprylic acid precipitation necessitates a simple, rapid, and accurate method for determination of residual caprylic acid. A high-performance liquid chromatography method for that purpose was developed and validated. The method involves depletion of immunoglobulins, the major interfering components that produce high background noise, by precipitation with acetonitrile (1:1, v/v). Chromatographic analysis of caprylic acid, preserved in supernatant with no loss, was performed using a reverse-phase C18 column (2.1 × 150 mm, 3 μm) as a stationary phase and water with 0.05% TFA–acetonitrile (50:50, v/v) as a mobile phase at a flow rate of 0.2 mL/min and run time of 10 min. The developed method was successfully validated according to the ICH guidelines. The validation parameters confirmed that method was linear, accurate, precise, specific, and able to provide excellent separation of peaks corresponding to caprylic acid and the fraction of remaining immunoglobulins. Furthermore, a 2⁴⁻¹ fractional factorial design was applied in order to test the robustness of developed method. As such, the method is highly suitable for the quantification of residual caprylic acid in formulations of human immunoglobulins for therapeutic use, as demonstrated on samples produced by fractionation of convalescent anti-SARS-CoV-2 human plasma at a laboratory scale. The obtained results confirmed that the method is convenient for routine quality control.     

产品质量特性重要度分级在质量链中的重要作用

本文简单介绍了产品质量特性重要度的分级,重点阐述产品质量特性重要度分级在质量链中的重要作用.     

Effect of Ozone-Treated or Untreated Saskatoon Fruits (Amelanchier alnifolia Nutt.) Applied as an Additive on the Quality and Antioxidant Activity of Fruit Beers

Fruit of Saskatoon (Amelanchier alnifolia Nutt.) are a good source of bioactive compounds, such as polyphenols, including anthocyanins, as well as vitamins, macro- and microelements and fibre. By treating Saskatoon fruits with gaseous ozone, and adding the material as an enhancer to barley beers, it is possible to impact the contents of bioactive compounds in the produced fruit beers. Sensory tests showed that beers made from barley with addition of Saskatoon fruit of the ‘Smoky’ cultivar were characterised by the most balanced taste and aroma. Physicochemical analyses of fruit beers, produced with Saskatoon fruit pulp added on the seventh day of fermentation, showed that the beers enhanced with ozone-treated and untreated ‘Smoky’ Saskatoon fruits had the highest contents of alcohol, 5.51% v/v and 5.66% v/v, respectively, as well as total polyphenol contents of 395 mg GAE/L and 401 mg GAE/L, respectively, and higher antioxidant activity (assessed using DPPH^•, FRAP and ABTS^+• assays). It was demonstrated that the ozonation process led to a decrease in the contents of neochlorogenic acid, on average by 91.00%, and of caffeic acid by 20.62%, relative to the beers enhanced with ‘Smoky’ Saskatoon fruits not subjected to ozone treatment. The present study shows that Saskatoon fruits can be used in the production of beer, and the Canadian cultivar ‘Smoky’ is recommended for this purpose.     

Analysis of KrF excimer laser beam modification resulting from ablation under closed thick film flowing filtered water

The application of a closed thick film flowing filtered water to immerse the ablation etching mechanism of an excimer laser poses interesting possibilities concerning debris control, modification of machined feature topography and modification of the ablation rate. Furthermore, these parameters have been shown to be dependent on flow velocity; hence, offering further user control of machining characteristics. However, the impact of this technique requires investigation. This contribution offers comparison of the calculated ablation pressure and the effect on feature surface characteristics given for laser ablation of bisphenol A polycarbonate using KrF excimer laser radiation in ambient air against laser ablation of the same substrate under closed thick film flowing filtered water immersion. Also, an impact of such immersion equipment on the optical performance of the micromachining centre used is quantified and reviewed. The pressure is calculated to have risen by a magnitude of 48, when using the liquid immersed ablation technique. This increase in pressure is proposed to have an increased surface roughness, promoting the number of asperities with a surface area lower than 16 μm²; resulting in a diffuse reflection of light and an apparent darkening of features. The focal length of the optical system was accurately predicted to increase by 2.958 mm, when using the closed flowing liquid immersion equipment. This equipment is predicted to have increased the optical depth of focus via reduction in the angle of convergence of the two defining image rays; yet the perceived focus, measured discretely by mean feature wall angle, was found to be 25% smaller when using the closed thick film flowing filtered water immersion technique instead of similar laser ablation in ambient air. A compressed plume interaction is proposed as a contributing factor in this change.     

紫外光固化阳离子复合胶粘剂的制备与表征

以三芳基六氟磷酸硫鎓盐为引发剂,钛酸四异丙酯(TIP)为无机前驱体,3,4-环氧环己基甲基3,4-环氧环己基甲酸酯为单体,制备了含TiO2纳米结构的紫外光固化阳离子复合胶粘剂。通过原子力显微镜对复合胶粘剂形貌进行表征,研究了TIP含量对胶粘剂折射率和光透过率的影响。结果表明：TiO2无机相均匀地分散在胶粘剂的聚合物基体中,平均粒径约为20 nm;随着体系中TIP质量分数的变化,复合胶粘剂折射率为1.510 3~1.540 9可调;胶粘剂的光透过率随TIP质量分数增加略有减低,但当TIP含量高达40%时,光透过率维持在90%左右。     

Modal attenuation in metal-clad graded-index slab optical waveguides

The paper presents the influence of refractive profile shape on the distribution of modal attenuation in planar metal-clad optical waveguide structures. A calculation method has been presented in which we applied the Snyder–Love expression on modal attenuation coefficients and matrix method 4 × 4 for the analysis of planar waveguides. The obtained results are almost identical with the exact results for refractive profiles: the parabolic, exponential, Gaussian and linear ones. It has been demonstrated that the applied calculation method can be used in waveguides of any profiles of the refractive index.     

电离层与卫星通信

利用电子流体动力学方程和麦克斯韦方程组推导了等离子体的特征频率、折射率，并讨论了电磁波在等离子体中传播的基本条件，从而得出了卫星通信的基本电磁学条件．     

Desorption induced by hot electrons: wave packet calculation of CO on Cu surfaces

A quantum mechanical photodesorption model, valid for metallic substrates and sub-picosecond laser pulses, is presented. It takes into consideration the photodesorption coordinate and models the metal hot-electron mediated desorption by a three electronic states: an ionic state of the adsorbate and two effective states representing the continuum of the metal. This multiple-state picture allows the sharing of the flow of energy injected by the laser between the adsorbate and the substrate. For the first time, the present modeling introduces the hot electrons of the metal through an optical potential based on the kinetic model developed earlier by the authors. This potential, and the resulting desorption yield, depend on the laser fluence. For CO on Cu(1 0 0) or Cu(1 1 1), the results are in fair agreement with the experimental findings.     

用频谱分析法测量声光驻波调制器的调制度

从调制的基本概念出发，指出声光驻波调制器件为宽带频率调制型。讨论了调制度概念的成立条件和适用范围。理论上求出其成立条件为ｖ＜０．９（ｖ＝２πＬ△ｕ／λ为衍射光强Ｉ（θ，ｔ）中的自变量）。鉴于一般驻波型声光器件都是含有一定的行波成份，但行波声场和驻波声场在拉曼－奈斯衍射范围内衍射角均遵从ｓｉｎθｍｉ＝土ｍλ／，故两者在空间上是无法分开的。文中给出了从频域上测量调制度Ｍ的一种新方法。并给出了零级和一般衍射光的测量值。