Microscale sample deposition onto hydrophobic target plates for trace level detection of neuropeptides in brain tissue by MALDI-MS

A sample preparation method that combines a modified target plate with a nanoscale reversed-phase column (nanocolumn) was developed for detection of neuropeptides by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS). A gold-coated MALDI plate was modified with an octadecanethiol (ODT) self-assembled monolayer to create a hydrophobic surface that could concentrate peptide samples into a approximately 200-500-microm diameter spot. The spot sizes generated were comparable to those obtained for a substrate patterned with 200-microm hydrophilic spots on a hydrophobic substrate. The sample spots on the ODT-coated plate were 100-fold smaller than those formed on an unmodified gold plate with a 1-microl sample and generated 10 to 50 times higher mass sensitivity for peptide standards by MALDI-TOF MS. When the sample was deposited on an ODT-modified plate from a nanocolumn, the detection limit for peptides was as low as 20 pM for 5-microl samples corresponding to 80 amol deposited. This technique was used to analyze extracts of microwave-fixed tissue from rat brain striatum. Ninety-eight putative peptides were detected including several that had masses matching neuropeptides expected in this brain region such as substance P, rimorphin, and neurotensin. Twenty-three peptides had masses that matched peaks detected by capillary liquid chromatography with electrospray ionization MS.     

Growth of Single-walled Carbon Nanotubes on Substrates Using Carbon Monoxide as Carbon Source

The growth of single-walled carbon nanotubes(SWCNTs) on substrates has attracted great interests because of the potential applications in various fields. Carbon monoxide(CO) was used as the carbon source for the growth of SWCNTs on silicon substrates. Random or oriented SWCNTs can be produced by varying the CO flow rate. When the flow rate of CO was as low as 20 sccm(sccm:standard cubic centimeter per minute), dense SWCNT networks with clean surface were produced. When the flow rate was above 50 sccm, vertically aligned SWCNT(VA-SWCNT) arrays were grown. Well-aligned VA-SWCNT arrays were obtained in the temperature range of 650-800℃ and the content of large-diameter(above 1.7 nm) tubes in the array increased with the temperature. The height of the array was affected by the growth temperature, the CO flow rate, and the growth time. These findings indicate CO can be used as an efficient carbon source for the growth of SWCNTs on substrates under low flow rates.     

激光诱导等离子体中的电子密度和电子温度的测量

脉冲激光诱发等离子体的谱诊断技术用来对其电子密度和电子温度的测量结果与理论计算进行了比较，同时讨论了运用这个方法的物理条件．     

Quantum chemical studies on structures and spectra of 2,5-distyrylpyrazine (DSP) laser dye

Semiempirical (MNDO and PM3) molecular orbital calculations have been undertaken to study the structures of the ground and excited states of 2,5-distrylpyrazine dye to assess its activity as a laser dye. In the ground and first excited singlet states, the trans-trans structure of C_2h symmetry is the most stable structure in the gas phase and in DMSO, which agrees with the experimental findings. Upon excitation, the flexibility of the molecule decreases, leading to a subsequent decrease in the radiationless deactivation pathway and this increases the fluorescence efficiency of DSP. The absorption, excitation, and emission spectra have been calculated at the MNDO level using the PM3 optimized geometries in DMSO. At this level the agreement between theory and experiment is quite good. An estimated absorption band at 377 nm (expt 380 nm) is assigned to the S₀→S₁ transition. The excited state absorption band at 457 nm (expt 460 nm) is assigned to the S₁→S₁₂ transition. The emission band at 458 nm (expt 460 nm) is assigned to the S′₁→S′₀ transition. The overlap between the emission and the excited-state absorption spectra is presumably the main reason behind the reduced laser activity of the investigated dye. © 1998 John Wiley & Sons, Inc. J Comput Chem 19: 585–592, 1998     

Synthesis of Eight‐shaped Poly(ethylene oxide) by the Combination of Glaser Coupling with Ring‐opening Polymerization

The eight‐shaped poly(ethylene oxide) (PEO) is synthesized by a combination of Glaser coupling with ring‐opening polymerization (ROP). Firstly, the star‐shaped (PEO‐OH) ₄ is synthesized by ROP of ethylene oxide (EO) using pentaerythritol as an initiator and diphenylmethyl potassium (DPMK) as a deprotonated agent, and then the alkyne group is introduced onto the PEO arm‐end to give (PEO‐Alkyne) ₄ in a NaH/tetrahydrofuran (THF) system. The intramolecular cyclization is carried out by a Glaser coupling reaction in a pyridine/CuBr/N,N,N′,N″,N″‐pentamethyldiethylenetriamine (PMDETA) system at room temperature in an air atmosphere, and eight‐shaped PEO was formed with high efficiency (almost 100%). The target polymers and intermediates were well characterized by SEC, MALDI‐TOF MS, ¹H NMR and FT‐IR in detail.

     

中温固体氧化物燃料电池LaNi0.6Fe0.4O3-δ阴极材料的制备及性能表征

以硝酸镧、硝酸镍和硝酸铁为原料,柠檬酸作燃料低温燃烧合成固体氧化物燃料电池阴极材料LaNi0.6Fe0.4O3-δ.X射线衍射（XRD）图谱显示,600℃煅烧可形成单一的LaNi0.6 Fe0.4 O3-δ钙钛矿相.电子显微镜（TEM和SEM）照片看出,其颗粒尺寸〈100 nm.电池交流阻抗谱图表明,在1050℃烧结制...     

High throughput identification of components from traditional Chinese medicine herbs by utilizing graphene or graphene oxide as MALDI-TOF-MS matrix

In this work, graphene or graphene oxide was utilized, for the first time, to identify small molecular components from traditional Chinese medicine (TCM) herbs, by acting as matrix of matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS). Due to the large surface area of graphene or graphene oxide, the analytes were trapped tightly to the matrix, which avoids the contamination of the ion source and vacuum system. Besides, their excellent electronic, thermal and mechanical properties make them desired matrices for MALDI-TOF-MS. Stable analysis was achieved with no background inference even at the concentration of 100 nM. Moreover, the limit of detection (LOD) could be greatly lowered by utilizing graphene or graphene oxide as a pre-enrichment adsorbent. In summary, the promoted MALDI-TOF-MS methodology was demonstrated to be simple, sensitive, fast, cost effective and, most importantly, high throughput.     

Observation of dimethylaminoethyl methacrylate–myoglobin binding reaction using laser spray mass spectrometry

Covalent bonds are often created by a reaction between chemicals and protein before causing various adverse effects in a cell. Dimethylaminoethyl methacrylate (DMAEMA), which has moderate toxicity, causes skin inflammation and throat irritation. For this study, we investigated a reaction mechanism between myoglobin and (DMAEMA) using a new analytical tool developed at our laboratory: laser spray mass spectrometry technique. It was found that initially DMAEMA was added to the amino group of protein by the Michael addition mechanism; the added DMAEMA was hydrolyzed to methacrylic acid using an autocatalytic system. The results of this study indicate the feasibility of the laser spray technique in analyses of reaction dynamics. Copyright © 2012 John Wiley & Sons, Ltd.     

MALDI-MS analysis of sialylated N-glycan linkage isomers using solid-phase two step derivatization method

Sialic acids usually locate at the terminal of many glycan structures in either α(2,3) or α(2,6) linkage, playing different roles in various biological and pathological processes. Several linkage specific carboxyl derivatization methods have been reported to discriminate between α(2,3) and α(2,6)-linked sialic acids by matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS). Among them, ethyl esterification was recently reported to achieve linkage specific derivatization between α(2,3) and α(2,6)-linked sialic acids with good selectivity. However, the method suffered from the instability of the generated lactones and byproducts of the derivatives. To overcome these shortcomings, a solid-phase two step derivatization method was introduced to convert the α(2,6)-linked sialic acid into ethyl esters and the α(2,3)-inked counterparts into N-methyl amides, respectively. Under the optimized derivatization conditions, our method was able to achieve accurate relative quantification of N-glycan as well as their corresponding sialylated linkage types, superior to the ethyl esterification method. The solid phase derivatization strategy was further applied to investigate N-glycans from biosimilar antibody drug and human serum from patients and healthy volunteers. This method has the potential to be used in the biomarker discovery and pharmaceutical industry.     

Influence of Interfacial Tension on Seeded Calcium Carbonate Scale Precipitation: Effect of Adsorbed Asphaltenes

Clay particles with adsorbed asphaltenes, which are commonly found in produced water, have been used as seed particles during precipitation of calcium carbonate in order to determine whether such particles may influence the kinetics of precipitation. The results show that the presence of the adsorbed asphaltenes accelerates the precipitation, and there is also a significant difference between different types of adsorbed asphaltenes. The adsorption of asphaltenes at the seed surface leads to a significant increase in the interfacial tension between the seed surface and the aqueous solution, and calcium carbonate therefore precipitates at the seed surface in order to reduce this high interfacial tension.