Bit-level systolic arrays for modular multiplication

This paper presents bit-level cellular arrays implementing Blakley's algorithm for multiplication of twon-bit integers modulo anothern-bit integer. The semi-systolic version uses 3n(n+3) single-bit carry save adders and 2n copies of 3-bit carry look-ahead logic, and computes a pair of binary numbers (C, S) in 3n clock cycles such thatC+S[0, 2N). The carry look-ahead logic is used to estimate the sign of the partial product, which is needed during the reduction process. The final result in the correct range [0,N) can easily be obtained by computingC+S andC+S–N, and selecting the latter if it is positive; otherwise, the former is selected. We construct a localized process dependence graph of this algorithm, and introduce a systolic array containing 3nw simple adder cells. The latency of the systolic array is 6n+w–2, wherew=n/2. The systolic version does not require broadcast and can be used to efficiently compute several modular multiplications in a pipelined fashion, producing a result in every clock cycle.     

The nearest neighbor random walk on subspaces of a vector space and rate of convergence

LetX be the collection ofk-dimensional subspaces of ann-dimensional vector spaceV _n overGF(q). A metric may be defined onX by letting

Analysis of basic hair dyes by HPLC with on-line post-column photochemical derivatisation

Summary A reversed phase liquid chromatographic method is proposed for the analysis of basic hair dyes (raw materials and colourant formulations). The performance of the method was enhanced by introducing post-column on-line photochemical derivatisation in combination with a Diode Array Detector. On-line photoderivatisation provided an effective way of selectively transforming the analytes to compounds with different spectral properties. For each analyte two characteristic UV-Visible spectra (photoreactor on and off) were obtained with the same mobile phase and this information in combination with the chromatographic data (k' at pH 3.0 and 4.5) enabled the unambiguous identification of both commonly used, approved, and banned basic hair dyes. Additionally, this approach was found useful to improve the method sensitivity, allowing the determination of analytes present in low concentration (0.03%) in complex commercial formulations.This work constitutes part of the thesis for the Dottorato di Ricerche of Roberto Gotti.     

基于标准CMOS工艺的片上太阳敏感器研究

微纳卫星对于载荷的苛刻要求使得太阳敏感器的微型化研究具有重要意义。为了解决光学器件和处理电路的集成兼容问题,文章基于标准CMOS工艺提出一种新型片上太阳敏感器,以金属走线层构建微型墙结构,两侧均匀分布pn结构成光电传感器,通过检测两侧光电流比例解算出入射光角度。文章从工艺实现、模型建立、数值仿真和实验测试等方面验证了器件的合理性和可行性。最终,片上太阳敏感器阵列芯片质量为1.5g,尺寸为304.2mm³,检测精度为±1.6°,视场范围为80°,可满足微型化需求。     

小像元量子阱FPA抗光学串音的FDTD仿真

采用光栅耦合结构的焦平面阵列(Focal Plane Array,FPA)在工艺上难以制备,反射耦合结构较为容易。为探究反射耦合结构是否可以在小尺寸范围内替代光栅耦合结构,文章使用FDTD电磁场仿真软件MEEP构建了光栅耦合结构和反射结构GaAs/AlGaAs量子阱红外焦平面阵列三像元模。通过对器件内部光学串音进行仿真,验证了在逼近衍射极限时,采用全内反射结构的FPA在5~7μm和8.5~10μm之间的抗串音效果强于光栅耦合结构,而在6.5~8.5μm和10~12μm之间,光栅耦合结构的抗串音效果更好,在12~15μm范围内,两种结构的抗串音能力相当。针对15μm中心距全内反射结构量子阱FPA,探究了反射角度、刻蚀深度和量子阱周期对其串音的影响。     

毫米波相控阵封装天线电磁兼容仿真分析与设计

提出了一种毫米波相控阵封装天线的建模方法,通过商业仿真软件搭建了相控阵封装天线集数字、模拟和射频于一体的系统级仿真模型。基于此模型,分析了毫米波相控阵封装天线典型电磁兼容问题机理。此外,提出了相控阵封装天线电磁兼容设计的基本原则。原理样机试验和装机试飞验证了所提出的电磁兼容建模、仿真、分析和设计方法的有效性与正确性。     

基于Zadoff-Chu序列的频控阵稳健波束成形方法

不同于传统相控阵,频控阵（Frequency Diverse Array,FDA）在所有阵元间引入频率偏差,可以生成具有精准指向特性的点状辐射方向图,有效克服传统相控阵方位角相关性导致的接收方向射频信号安全性下降的问题。作为与传统相控阵的本质区别,FDA阵元频偏设置直接影响FDA辐射方向图的形状。为了生成理想的点状方向图,提出了一种Zadoff-Chu FDA（ZC-FDA）稳健波束成形方案,利用Zadoff-Chu序列调整阵元频偏,消除FDA辐射方向图周期性,抑制距离-方位角耦合性。与现有FDA系统相比,ZC-FDA方案在理想点状辐射方向图生成和波束旁瓣水平抑制方面具有明显优势。     

基于GNSS多通道跟踪接收机的阵列反欺骗方法

近年来,基于阵列天线的空域处理方法被认为是最有效的欺骗检测和抑制手段之一。提出了一种基于卫星导航接收机多通道跟踪能力的阵列反欺骗方法。多通道跟踪接收机对每一个捕获到的导航信号在所有阵元通道后均进行跟踪处理并提取信号幅度和载波相位观测量,首先计算载波相位双差平方和进行欺骗检测,然后利用载波相位单差和信号幅度比估计信号导引矢量,从而进行基于子空间投影的欺骗信号抑制或基于波束形成的真实卫星信噪比提升。理论分析和仿真试验证明,该方法可有效检测并消除同一来向的欺骗信号且不影响真实卫星信号质量。由于前端非理想因素带来的幅度和相位偏移都已包含在接收机跟踪通道提取的观测量内,实际应用时对阵列天线校准和射频通道均衡的要求明显降低。     

多波束相控阵天线角度测量方法

在雷达、通信、测控等领域中,基于相控阵天线的幅度和差单脉冲测角技术是基本方法,但该方法通过旋转法向方向图去近似表示子波束方向图,并用一阶泰勒公式近似表示子波束接收信号幅度,从而带来非噪声因素误差,最终导致目标角度估计精度不高。为此,通过相控阵天线同时产生两个形状相同但相互独立的子波束,旋转波束指向中心轴方向的方向图函数来确定两个子波束的方向图函数,并用高阶泰勒公式对子波束接收信号幅度进行近似,从而减少误差。仿真和硬件测试结果表明所提方法能够有效提高测角精度。     

一种应用于5G毫米波通信的双极化有源相控阵模组

针对5G毫米波通信,研制了一种双极化有源相控阵天线模组。厚度为2 mm的多层PCB正面印制阵列天线,在其背面集成多通道波束成形芯片,通过中间层实现天线与芯片的互连以及供电、控制等。测试结果表明,研制的板状4×4双极化相控阵模组在E面和H面均实现了不小于±40度的波束扫描范围（不大于3 dB的电平下降）和低于-18 dB的归一化交叉极化电平,在24～27.5 GHz的频率范围内实现了V极化和H极化分别为42.6～45.7 dBm和43.5～46.1 dBm的等效全向辐射功率（EIRP）。