Voltammetric behaviour of bromhexine and its determination in pharmaceuticals

A complete electrochemical study and a novel electroanalytical procedure for bromhexine quantitation are described. Bromhexine in methanol/0.1 mol L⁻¹ Britton–Robinson buffer solution (2.5/97.5) shows an anodic response on glassy carbon electrode between pH 2 and 7.5. By DPV and CV, both peak potential and current peak values were pH-dependent in all the pH range studied. A break at pH 5.5 in E_P versus pH plot revealing a protonation–deprotonation (pK_a) equilibrium of bromhexine was observed. Spectrophotometrically, an apparent pK_a value of 4.3 was also determined.

An electrodic mechanism involving the oxidation of bromhexine via two-electrons and two-protons was proposed. Controlled potential electrolysis followed by HPLC–UV and GC–MS permitted the identification of three oxidation products: N-methylcyclohexanamine, 2-amino-3,5-dibromobenzaldehyde and 2,4,8,10-tetrabromo dibenzo[b,f][1,5] diazocine.

DPV at pH 2 was selected as optimal pH for analytical purposes. Repeatability, reproducibility and selectivity parameters were adequate to quantify bromhexine in pharmaceutical forms. The recovery was 94.50 ± 2.03% and the detection and quantitation limits were 1.4 × 10⁻⁵ and 1.6 × 10⁻⁵ mol L⁻¹, respectively. Furthermore, the DPV method was applied successfully to individual tablet assay in order to verify the uniformity content of bromhexine. No special treatment of sample were required due to excipients do not interfered with the analytical signal. Finally the method was not time-consuming and less expensive than the HPLC one.     

Direct and simultaneous voltammetric analysis of heavy metals in tap water samples at Assiut city: an approach to improve the analysis time for nickel and cobalt determination at mercury film electrode

Tap water samples (Assiut city, lie in the middle north of upper Egypt, approx. 370 km from Cairo, January-March, 2002) were taken from the eight sampling sites of different locations at Assiut city. The samples are analyzed to determine the total content of cadmium, copper, lead and zinc by differential pulse anodic stripping voltammetry (DPASV) while nickel and cobalt are determined by a new simple differential pulse adsorptive stripping voltammetry (DPAdSV), using dimethylglyoxime (DMG) as the complexing agent. This method uses sodium sulfite as the supporting electrolyte, which facilitates the removal of oxygen interference without the traditional necessity of purging with inert gas. The effect of various parameters was studied using DPASV (for Cd, Pb, Cu and Zn) and AdSV (for Ni and Co) methods. Subsequently, under the so found experimental conditions, the stability of calibration curves and the detection limits (μg/l) have been determined. The data achieved (for all metals utility) are comparable to those measured by the graphite furnace atomic absorption spectrophotometric (GF-AAS) method. The effects of the interferences between these metal ions have been investigated. Moreover, the effect of storage was discussed and the obtained results were compared favorably with standard official methods. Statistical analysis of the database exhibits applicability and the accuracy of the techniques. The results obtained from the two techniques (Voltammetry and GF-AAS) are in very good agreements in the most tap water samples.     

Resolution of global signals using ratio differential pulse polarograms: Determination of p-nitroaniline and p-nitrotoluene in their mixture

Ratio differential pulse polarograms obtained by dividing the multianalyte and single analyte signals are proposed as a tool for resolution of global signals and quantification of the analytes from a qualitatively known mixture by differential pulse polarography (DPP) and related electroanalytical techniques. The influences of shape and position of the resolving function (DP polarograms of individual analyte) on the efficiency of resolution are discussed on simulated and experimental results. The method is applied for the determination of p-nitroaniline (NA) and p-nitrotoluene (NT) from their mixture in N,N′-dimethylformamide solutions with 0.1 M tetrabutylammonium iodide as supporting electrolyte, using an external calibration diagram and internal standard addition methods. NA and NT give one-electron DP polarographic peaks with 93 mV of peak separation and, therefore, show significant overlapping which depends on the concentration ratio of NA and NT in the mixture. The method is especially suitable for quantification of one analyte in the presence of a large excess of another analyte, because by division the component in excess is removed and the pseudo-ratio DPP of the minor component is clearly revealed in a way which is not possible by deconvolution using polynomial division or deconvolution by Fourier transforms.     

Decomposition of vegetables for determination of Zn,Cd, Pb and Cu by stripping voltammetry

A simple and accurate digestion method using nitric acid, perchloric acid and hydrogen peroxide has been developed for use in trace analysis for heavy metals in vegetables by differential pulse anodic stripping voltammetry. The recovery of the metals from the samples is lower if the hydrogen peroxide is omitted from the digestion mixture. Standard reference materials have been analysed satisfactorily by this method.     

新的脉冲进样AAS法测定“麻杏石甘汤”中的微量金属元素

本文研制了一种新的脉冲进样装置，用于火娄原子吸收分光光度法测定中药煎剂中的Ｃａ，Ｍｇ，Ｆｅ，Ｍｎ，Ｚｎ五种金属元素含量，实验表明，利用此种装置可以同时获得两种进样方式的分析结果，线性范围比常规法宽两倍，耗样量，精密度及分析速度均优于常规法。     

有机锗(锗-132)的示差脉冲极谱研究

用示差脉冲极谱法,在pH1.30H_2SO_4和3,4-二羟基苯甲醛(DHB)底液中,获得了有机锗(Ge-132)和无机锗Ge(Ⅳ)二个配位吸附极谱波,波峰分别为E_P2-0.62V和E_pl=-0.47V(υs.AgCI/Ag),Ge-132浓度在2.6×10_(-5)～3.1×10_（-3）mol/L范围内,Ge(Ⅳ)浓度在 3.1×10_（-5）～2.1×10_（-4）mol/L范围内分别与峰电流星线性关系.利用该示差脉冲极谱法可同时测定Ge-132和Ge(Ⅳ),用于有机锗营养口服液中Ge-132和Ge(Ⅳ)的测定结果满意.还探讨了Ge-132极谱波的性质,测定了有关动力学参数.     

Fast electron transfer repair of oxidizing OH adduct of dGMP by chlorogenic acid

ＥｘｔｅｎｓｉｖｅｓｔｕｄｉｅｓｏｆｒａｄｉａｔｉｏｎｏｒｃｈｅｍｉｃａｌｉｎｊｕｒｙｏｆｂｉｏｌｏｇｉｃａｌｔａｒｇｅｔｍｏｌｅｃｕｌｅｓｄｅｍｏｎｓｔｒａｔｅｔｈａｔＯＨｒａｄｉｃａｌ,ｔｈｅｍｏｓｔｒｅａｃｔｉｖｅｏｘｙｇｅｎｓｐｅｃｉｅｓ,ｒｅａｃｔｓｗｉｔｈｂｉｏｌｏｇｉｃａｌｍａｃｒｏｍｏｌｅｃｕｌｅｓ,ｓｕｃｈａｓＤＮＡ,ｉｎｄｕｃｉｎｇｂａｓｅａｌｔｅｒａｔｉｏｎｓ,ｂａｓｉｃｓｉｔｅｓ,ａｎｄｓｔｒａｎｄｂｒｅａｋｓ,ｒｅｓｕｌｔｅｄｉｎｖａｒｉｏｕｓｐａｔｈｏｇｅｎｅｓｉｓ,ｓｕｃｈ…     

用脉冲D2反应研究CeO2在Co-CeO2/SiO2费托合成催化剂中的促进作用机理

 采用脉冲D2反应研究了CeO2在Co-CeO2/SiO2费托合成催化剂中的作用机理. 通过比较在Co-CeO2/SiO2和Co/SiO2催化剂上的脉冲D2反应实验结果发现, CeO2可以提高载体表面 Si-OH 的H-D同位素交换活性和 Si-OH 中H参与CO加氢反应的活性; CeO2不仅增加了催化剂表面活性碳物种的总量,而且活性碳物种以链增长单体-CH2-为主,因而有利于增加费托合成反应速率和链增长几率; CeO2的加入明显提高了催化剂表面碳原子的加氢反应速率,从而减少了碳沉积.     

One-electron oxidation of the iron(II) complex of 1,10-phenanthroline-5,6-quinone A pulse radiolysis study

One-electron oxidation of the ferrous tris-PQ complex, a model for lipoxygenase, was attempted using oxidants such as •OH, N^•₃, Br^•-₂, Tl²⁺ and TlOH⁺. •OH was found to react with the complex with a bimolecular rate constant of (3.9±0.6)x10⁹dm³mol^-1s^-1, a rate which is not very dissimilar to that for the reaction with the ligand PQ. However the product of the reaction was found to be a OH-adduct rather than a cation radical. No reaction was found to occur with N^•₃ or Br^•-₂. Both Tl²⁺ and TlOH⁺ reacted with the complex to form its oxidised species with rate constants of (7.0±1)x10⁸dm³mol^-1s^-1 and (4.0±0.8)x10⁸dm³mol^-1s^-1, respectively. From a comparison of the rate constants and the transient spectra it was concluded that the centre of oxidation is the ligand rather than the metal.     

Determination of dissolved manganese in natural waters by differential pulse cathodic stripping voltammetry

A procedure based on differential pulse cathodic stripping voltammetry on the graphite electrode is described for the determination of dissolved manganese in natural waters buffered at pH about 6.5 with acetate solution. In order to avoid interference of iron(II) the addition of fluoride is used. The limit of detection is 3 g/l for a deposition time of 6 min. Acidification and UV-irradiation are recommended for samples containing dissolved organic matter. Results of manganese determination in table mineral waters are reported and the possibility of manganese speciation is discussed.