不同V/III族元素比对m面GaN薄膜性能的影响

摘要：采用分子束外延（MBE）方法在蓝宝石衬底上外延生长m面GaN薄膜。利用原子力显微镜(AFM)、扫描电子显微镜(SEM)分析了薄膜表面形貌,对比分析结果,发现V/III族元素比从1:80降低到1:90时,外延膜表面均方根粗糙度从13.08nm降低到9.07nm。利用光谱型椭偏仪研究m面GaN薄膜,通过物理模型建立和光谱拟合得到了m面GaN薄膜的厚度、折射率和消光系数。拟合结果显示,GaN样品厚度和理论值一致,且V/III族元素比为1:90时,所得外延膜折射率较低,透射率大。两种测试方法的结果表明,V/III族元素比较小的样品晶体质量高。     

基于变量节点可靠度的洗牌置信传播算法

提出了一种新的低密度奇偶校验(Low-Density Parity-Check,LDPC)码串行译码策略.该方法基于原有的LDPC码串行译码策略,根据来自信道的初始消息的可靠度对变量节点或校验节点进行均匀分组.对所提方法的误码率与平均迭代次数进行了分析.仿真结果表明:该策略的性能比原来的LDPC码串行译码策略有很大提高.     

平坦地面条件下装备间天线电磁耦合度分析

分析了地表面反射系数以及地面土壤介质的介电特性,研究了车体结构对天线辐射特性的影响,仿真得到了车体模型、地面介质、距离等因素对天线间耦合度的影响,建立了平坦地面条件下,通信车的收发天线间电磁耦合度的精确的仿真模型.经与实测数据对比分析,仿真结果与实测数据变化规律一致,最大误差16.54 dB,均方差4.21 dB.     

Studies on the Thermodynamic and Kinetic Properties of the Reactions of Ti+ with Sulfur Transfer Reagent SCO Along the C═S Bond Activation Branch at 200–1200K

Theoretical studies on the thermodynamic and kinetic properties of the reactions of Ti⁺ with sulfur transfer reagent SCO via the C═S bond activation pathway have been carried on using DFT/B3LYP method, general statistical thermodynamics, and Eyring transition state theory with Wigner correction. The relevant reactions include reaction 1 ⁴ Ti⁺+¹SCO → ⁴ IM ₁ → ⁴ TS ₁ → ⁴ IM ₂ → ⁴ TiS⁺+ ¹ CO, and reaction 2 ⁴Ti⁺+¹SCO →⁴IM₁→ CP →²IM₂→²TiS⁺+¹CO in which the spin multiplicity changes from the quartet state to the doublet state in the crossing region. It is concluded that the increase of the temperature is favored to the reaction 1 process, since the equilibrium constants (K) rises from 0.566 × 10[P]-9 at 200 K to 0.109 × 10⁰ at 1200 K, and the reaction rate constant (k) from 0.222 × 10⁰ s[P]-1 at 200 K to 0.540 × 10 ¹¹ s[P]-1 at 1200 K. Moreover, reaction 1 is endothermic, and non-spontaneous in the way the entropy increases, while reaction 2 is exothermic and spontaneous in the way their entropy decreases. The reaction path 2 is the energetically favorable channel, and its thermodynamic data change not largely with the rise of temperature.     

Studies on Poly(Dialkoxyphosphazenes) for the Medical Applications

Abstract

The presence of trace of chlorine in poly(diorganophosphazenes) [-N=P(OR)2-]., where R = C₂H₅, CH₂CF₃, C₂F₅, C₄H₅, C₆H₁₃, C₈H₁₇, C₁₂H₂₅, CH₂C₆H₅ in many cases leads to the substantial changes of their physicochemical properties and limits application possibilities of this class of polymers especial for the medical materials. Despite the optimization of reaction conditions for each nucleophilic alkoxy substituent, the obtained poly(dia1koxyphosphaenes) exhibited some physicochemical anomalies.     

Synthesis,Structures, and Fungitoxicity of Novel Organophosphorus Compounds

Abstract

A series of biologically active organophosphorus compounds have been synthesized by the reactions of O,O-diethylchlorophosphate with Schiff bases derived from 5-(phenyl/substituted phenyl)-2-hydrazino-1,3,4-oxadiazole and salicylaldehyde/2-hydroxyacetophenone. The compounds have been characterized on the basis of analyses and spectral (IR, ¹H, ¹³C NMR) data. Fungicidal activities of these derivatives against Colletotrichum falcatum, Fusarium oxysporum, and Curvularia pallescence have been evaluated. All compounds showed moderate to significant antifungal activity.     

1,2- and 1,3-diphosphetanes from alkylidenephosphines

Abstract

Alkyl- or arylbis(trimethylsilyl)phosphines as well as tris(trimethylsilyl)phosphine and the corresponding arsines react with acyl chlorides to give [1-(trimethylsiloxy)alkylidene]phosphines 1 and -arsines 2; most of their 2,2-dimethylpropylidene derivatives are thermally stable at room temperature. With the same class of phosphines as starting compounds and carbon disulfide [bis(trimethylsilylsulfano)methylidene]phosphines 3 are formed, whereas [(dialkylamino)methylidene]-4 and [diarylmethylidene]phosphines 5 or the corresponding arsines 6 and 7 can be obtained from acyl amides or ketones.¹     

Synthesis,polymerization, and thermal properties of benzoxazine based on bisphenol‐S and allylamine

A bifunctional benzoxazine monomer, 6,6′‐bis(3‐allyl‐3,4‐dihydro‐2H‐benzo[e][1,3]oxazinyl) sulfone (BS‐ala), was synthesized from bisphenol‐S, allylamine and formaldehyde via a solution method. The chemical structure of BS‐ala was confirmed by ¹H and ¹³C nuclear magnetic resonance (NMR) spectroscopy, Fourier transform infrared (FTIR) spectroscopy, and elemental analysis. The polymerization behavior of BS‐ala was investigated by FTIR, solid‐state ¹³C NMR, and differential scanning calorimetry (DSC). The oxazine ring opening polymerization is prior to the addition polymerization of allyl group, and the exothermic peaks corresponding to the two reactions appear partially overlapped in the DSC curve. The storage modulus of the resultant polybenzoxazine at 25°C is about 3.9 GPa, and the glass transition temperature is 254°C. The 5% and 10% weight loss temperatures of the polybenzoxazine are about 335°C and 361°C in both air and nitrogen, respectively. The char yield is about 58% at 800°C in nitrogen, whereas almost no residue is remained at 700°C in air. Copyright © 2012 John Wiley & Sons, Ltd.     

Mechanical and anti‐stabbing properties of modified thermoplastic polymers impregnated multiaxial p‐aramid fabrics

New forms of hybrid multiaxial nanocomposites with enhanced mechanical and stab resisting properties are presented. This study is motivated by the lack of knowledge in the study of the multiaxial fabric nanocomposites with two modified thermoplastic matrices for antiballistic protection. Introduction of 5 wt.% silica nanoparticles in the composite of polyurethane/p‐aramid/poly (vinyl butyral) leads to significant improvement in mechanical properties, and the addition of silane as a coupling agents and glutaraldehyde as a crosslinking agents yielded maximal values of storage modulus, tensile modulus and anti‐stabbing properties for hybrid nanocomposites. Ballistic resistance testing and penetration depth of the hybrid nanocomposites were visualized using image analysis. Copyright © 2013 John Wiley & Sons, Ltd.