MXene Functionalized,Highly Breathable and Sensitive Pressure Sensors with Multi-Layered Porous Structure

Breathable, flexible, and highly sensitive pressure sensors have drawn increasing attention due to their potential in wearable electronics for body-motion monitoring, human-machine interfaces, etc. However, current pressure sensors are usually assembled with polymer substrates or encapsulation layers, thus causing discomfort during wearing (i.e., low air/vapor permeability, mechanical mismatch) and restricting their applications. A breathable and flexible pressure sensor is reported with nonwoven fabrics as both the electrode (printed with MXene interdigitated electrode) and sensing (coated with MXene/silver nanowires) layers via a scalable screen-printing approach. Benefiting from the multi-layered porous structure, the sensor demonstrates good air permeability with high sensitivity (770.86–1434.89 kPa⁻¹), a wide sensing range (0–100 kPa), fast response/recovery time (70/81 ms), and low detection limit (≈1 Pa). Particularly, this sensor can detect full-scale human motion (i.e., small-scale pulse beating and large-scale walking/running) with high sensitivity, excellent cycling stability, and puncture resistance. Additionally, the sensing layer of the pressure sensor also displays superior sensitivity to humidity changes, which is verified by successfully monitoring human breathing and spoken words while wearing a sensor-embedded mask. Given the outstanding features, this breathable sensor shows promise in the wearable electronic field for body health monitoring, sports activity detection, and disease diagnosis.     

Solid Ink Laser Patterning for High-Resolution Information Labels with Supervised Learning Readout

Tagging, tracking, or validation of products are often facilitated by inkjet-printed optical information labels. However, this requires thorough substrate pretreatment, ink optimization, and often lacks in printing precision/resolution. Herein, a printing method based on laser-driven deposition of solid polymer ink that allows for printing on various substrates without pretreatment is demonstrated. Since the deposition process has a precision of <1 µm, it can introduce the concept of sub-positions with overlapping spots. This enables high-resolution fluorescent labels with comparable spot-to-spot distance of down to 15 µm (444,444 spots cm⁻²) and rapid machine learning-supported readout based on low-resolution fluorescence imaging. Furthermore, the defined thickness of the printed polymer ink spots can be used to fabricate multi-channel information labels. Additional information can be stored in different fluorescence channels or in a hidden topography channel of the label that is independent of the fluorescence.     

In Situ Electrical Network Activation and Deactivation in Short Carbon Fiber Composites via 3D Printing

Prior studies on carbon-filler based, conductive polymer composites have mainly investigated how conductive filler morphology and concentration can tailor a material's electrical conductivity and overlooks the effects of filler alignment due to the difficulty to control and quickly quantify the filler alignment. Here, direct ink write 3D printing's unique ability is utilized to control carbon fiber alignment with a single process parameter, velocity ratio, to instantaneously activate or deactivate the electrical network in composites. Maximum electrical conductivity is achieved by randomly aligning carbon fibers that enhances the chance of direct fiber-to-fiber contact and, thus, activating the electrical network. However, aligning the fibers by increasing the velocity ratio disrupts the electrical network by minimizing fiber-to-fiber contact that resulted in a drastic decrease in electrical conductivity by as much as five orders of magnitude in both short and long carbon fiber composites. With this study, this study demonstrates that electrically conductive or insulative composites can be fabricated sequentially with a single ink. This novel ability to instantaneously control the electrical conductivity of carbon fiber reinforced composites allow to directly embed conductive pathways into designs to 3D print multifunctional composites that are capable of localized heating and self-sensing.     

用于超外差接收机提供本振源的高功率510 GHz单片集成三倍频器

本文介绍了一种基于砷化镓材料的高功率490~530 GHz单片集成三倍频器。基于提出的对称平衡结构,该三倍频器不仅可以实现良好的振幅和相位平衡,用来实现高效的功率合成,还可以在没有任何旁路电容的情况下提供直流偏置路径以保证高效倍频效率。同时,开展容差性仿真分析二极管关键电气参数与结构参数对倍频性能的影响研究,以便最大化提升倍频性能。最终,在大约80~200 mW的输入功率驱动下,研制的510 GHz三倍频,在490~530 GHz频率范围内,输出功率为4~16 mW,其中峰值倍频效率11%。在522 GHz频点处,该三倍频在218 mW的输入功率驱动下,产生16 mW的最大输出功率。该三倍频器后期将用于1 THz的固态外超外差混频器的本振源。     

手持终端设备主备电池控制系统设计

手持终端设备属于一种嵌入式系统,特别在工业应用领域对其供电持续性的要求很高。为了解决单电池供电下设备续航能力不足导致传输数据丢失的问题,本文设计一种主备电池控制系统,提高了整机的续航能力和电源系统的可靠性。方案设计对切换灵敏度、功耗和可靠性方面进行了综合考虑,已经应用到实际产品中,取得了良好的效果。     

一种Ku波段综合馈电多功能板的研制

基于多层微波数字复合基板层叠互联技术,研制的Ku波段综合馈电多功能板集成了射频收发网络、电源分配网络、阵面波控及波控分配网络,主要负责16个片式T/R组件的功率分配与合成,同时为各T/R组件提供电源及控制信号。文中对多功能板的架构设计、工作原理进行了说明,重点介绍了各微波垂直互联电路和射频收发网络的设计,最后加工并测试了验证样件,测试结果良好。收发网络总口驻波＜1.9,分口驻波＜1.3,插损＜16 dB,相邻端口的隔离度＞20 dB,且幅度一致性≤0.602 dB,相位一致性≤6.429°。工程应用可行性和实用性得到了验证。     

Liquid–paper interactions during liquid drop impact and recoil on paper surfaces

The spreading and recoiling of water drops on several flat and macroscopically smooth model surfaces and on sized paper surfaces were studied over a range of drop impaction velocities using a high-speed CCD camera. The water drop spreading and recoiling results on several model hydrophobic and hydrophilic surfaces were found to be in agreement with observations reported in the literature. The maximum drop spreading diameter for those model surfaces at impact was found to be dependent upon the initial drop kinetic energy and the degree of hydrophobicity/hydrophilicity of the surface. The extent of the maximum drop recoiling was found to be much weaker for hydrophilic substrates than for hydrophobic substrates. Sized papers, however, showed an interesting switch of behaviour in the process of water drop impaction. They behave like a hydrophobic substrate when a water drop impacts on it, but like a hydrophilic substrate when water drop recoils. Although the contact angle between water and hydrophilic or hydrophobic non-porous surfaces changes from advancing to receding as reported in literature, the change of contact angle during water impact on paper surface is unique in that the level of sizing was found to have a smaller than expected influence on the degree of recoil. Atomic force microscopy (AFM) was used to probe fibres on a sized filter paper surface under water. The AFM data showed that water interacted strongly with the fibre even though the paper was heavily sized. Implications of this phenomenon were discussed in the context of inkjet print quality and of the surface conditions of sized papers. Results of this study are very useful in the understanding of inkjet ink droplet impaction on paper surfaces which sets the initial condition for ink penetration into paper after impaction.     

电子设备电源系统的谐波特性研究

电子设备的电源系统或电力系统中,存在多种类型的谐波源,分为谐波电流源和谐波电压源,本文针对典型电源系统开关电源系统进行分类和建模,给出各类谐波源的特征,并对容性滤波整流电路的谐波特性进行了分析.     

三值双传输管电路的通用综合方法

提出采用双传管逻辑设计三值电路的方法,对每个MOS管的逻辑功能均采用传输运算予以表示以实现有效综合.建立了三值双传输管电路的反演法则和对偶法则.新提出的三值双传输管逻辑电路具有完全基于标准CMOS工艺,无需对MOS管作任何阈值调整,结构简单、规则,输入信号负载对称性好,逻辑摆幅完整以及无直流功耗等特点.采用TSMC 0.25μm工艺参数和最高电压为3V的HSPICE模拟结果验证了所提出综合方法的正确性.     

钟控神经MOS管的改进及其在多值电路中的应用

首先对钟控神经MOS管进行研究,提出了相应的改进方法.然后采用此改进的钟控神经MOS管设计了一种新型多值触发器.与传统的触发器相比较,此多值触发器具有结构简单、速度快、功耗低等特点;而且无需改变电路结构就可实现不同基的多值触发器.PSPICE模拟证明了所设计的电路具有正确的逻辑功能.