柔性薄膜收发组件技术研究

采用有源相控阵技术的薄膜合成孔径雷达因其全天候、大范围、高精度的探测能力,受到各国广泛重视。柔性薄膜T/ R 组件,由于其重量轻、厚度薄、可弯曲的特性,可以满足天基预警雷达柔性薄膜天线的需要。柔性 薄膜收发组件作为薄膜合成孔径雷达的核心部件,成为薄膜合成孔径雷达(SAR)的关键。文中对柔性薄膜T/ R 组件的接收和发射电路、弯曲特性进行了仿真分析,并对该T/ R 组件样机进行测试验证,获得了工作频段为L 波段,接收增益大于24dB,噪声系数小于2dB,发射功率大于1W,弯曲对带内的损耗影响小于0. 1dB,对带内的相位影响小于2°的结果,其在噪声和接收性能上具有先进性,并对工程应用具有一定的实际参考意义。     

Sintered silver finite element modelling and reliability based design optimisation in power electronic module

This paper discusses the design for reliability of a sintered silver structure in a power electronic module based on the computational approach that composed of high fidelity analysis, reduced order modelling, numerical risk analysis, and optimisation. The methodology was demonstrated on sintered silver interconnect sandwiched between silicon carbide chip and copper substrate in a power electronic module. In particular, sintered silver reliability due to thermal fatigue material degradation is one of the main concerns. Thermo-mechanical behaviour of the power module sintered silver joint structure is simulated by finite element analysis for cyclic temperature loading profile in order to capture the strain distribution. The discussion was on methods for approximate reduced order modelling based on interpolation techniques using Kriging and radial basis functions. The reduced order modelling approach uses prediction data for the thermo-mechanical behaviour. The fatigue lifetime of the sintered silver interconnect and the warpage of the interconnect layer was particular interest in this study. The reduced order models were used for the analysis of the effect of design uncertainties on the reliability of the sintered silver layer. To assess the effect of uncertain design data, a method for estimating the variation of reliability related metrics namely Latin Hypercube sampling was utilised. The product capability indices are evaluated from the distributions fitted to the histogram resulting from Latin Hypercube sampling technique. A reliability based design optimisation was demonstrated using Particle Swarm Optimisation algorithm for constraint optimisation task consists of optimising two different characteristic performance metrics such as the thermo-mechanical plastic strain accumulation per cycle on the sintered layer and the thermally induced warpage.     

发射组件监控模块的设计

监控模块是发射组件的重要组成部分,主要用于状态采集和开关控制。监控模块可实现发射组件的数字量采集、模拟量采集和信息处理。同时,上位机可通过控制局域网(CAN)总线获取发射组件的工作信息,并实现射频开关控制。文中介绍了监控模块的功能和组成框图,并对硬件电路设计和软件设计作了详细介绍,对监控模块的设计提出了一些有益的建议。     

基于单片机和光电开关的通用计数器设计

At presrent, the photoelectric switch is more and more widely used in the industrial automation equipment.It can be finished counting industrial products by using the characteristic of the photoelectric switch which can detect the objects without touching them. This design uses the modular design method,including power-supply module, The photoelectric conversion module, optocoupler isolation circuit module, power off protection module, matrix keyboard module, counting module and The display module. It mainly uses 51 single-chip microcomputer to control the system,uses the keilC51 software to design program,uses the Proteus software to complete the simulation. Through the experiment, it proves the design is feasible.     

钙钛矿太阳能电池的商业化进展与挑战

钙钛矿太阳电池是一项颠覆性的光伏技术,具有能量转化效率高、生产成本低、制备工艺简单等优势。当前,钙钛矿太阳能电池的认证效率已达25.7%,但其面临着严重的商业化瓶颈,如稳定性差、模组效率相对低、铅毒性等,且这些问题相互关联。本文简述了钙钛矿太阳能电池的工作原理和器件结构,并归纳总结了在解决钙钛矿太阳能电池稳定性、封装和模组化等商业化瓶颈问题方面的主要研究进展。最后,本文提出了钙钛矿光伏商业化进程中值得关注的解决措施。     

Geometrical design of thin film photovoltaic modules for improved shade tolerance and performance

Partial shading in photovoltaic modules is an important reliability and performance concern for all photovoltaic technologies. In this paper, we show how cell geometry can be used as a design variable for improved shade tolerance and performance in monolithic thin film photovoltaic modules (TFPV). We use circuit simulations to illustrate the geometrical aspects of partial shading in typical monolithic TFPV modules with rectangular cells, and formulate rules for shade tolerant design. We show that the problem of partial shading can be overcome by modifying the cell shape and orientation, while preserving the module shape and output characteristics. We discuss two geometrical designs with cells arranged in radial and spiral patterns, which (i) prevent the reverse breakdown of partially shaded cells, (ii) improve the overall power output under partial shading, and (iii) in case of spiral design, may additionally improve the module efficiency by reducing sheet resistance losses. We compare these designs quantitatively using realistic parameters and discuss the practical aspects for their implementation. Copyright © 2013 John Wiley & Sons, Ltd.     

Failure analysis of Cu(In,Ga)Se2 photovoltaic modules: degradation mechanism of Cu(In,Ga)Se2 solar cells under harsh environmental conditions

High‐temperature‐induced and humidity‐induced degradation behaviors were investigated through the failure analysis of encapsulated Cu(In,Ga)Se₂ (CIGS) modules and non‐encapsulated CIGS cells. After being exposed to high temperature (85 °C) for 1000 h, the efficiency loss of CIGS modules and the resistivities of the aluminum‐doped zinc oxide (AZO) layer, CIGS layer, and Mo layer were slightly increased. After damp heat (DH) testing (85 °C/85% RH), the efficiency of some modules decreased significantly accompanied by discoloration, and in these areas, the resistivity of the AZO layers increased markedly. The causes of degradation of CIGS cells after high temperature and DH tests were suggested through X‐ray photoelectron spectroscopy analysis. The high‐temperature‐induced degradation behaviors were revealed to be increases in series resistance of the CIGS cells, due to the adsorption of oxygen on the AZO, CIGS, and Mo layers. The degradation behavior after DH (85 °C/85% RH) exposure was caused by the adsorption of oxygen, as well as the generation of Zn(OH)₂ due to water molecules. In particular, the humidity‐induced degradation behavior in discolored CIGS modules was ascribed to the generation of Zn(OH)₂ and carboxylic acids in the AZO layer, due to a chemical reaction between the AZO, ethylene‐vinyl acetate copolymer, and water. Copyright © 2014 John Wiley & Sons, Ltd.     

基于MEMS传感器的无线位置跟踪控制仿真应用

针对嵌入式工业控制系统终端显示的需要,提出了一种基于微处理器R1610和LCD控制器SSD1963的液晶显示模块的设计方法。详细阐述了硬件接口电路的设计和控制软件的编程,重点介绍了R1610、SSD1963以及TFT液晶屏AT070TN83之间的硬件连接方法,分析了SSD1963液晶控制的使用方法以及针对液晶屏显示时序的系统设置。结合显示控制实例实现了图像在液晶屏上的显示,显示效果良好。该显示模块的设计具有一定的应用前景和参考价值。     

A monolithically integrated high‐efficiency Cu(In,Ga)Se2 mini‐module structured solely by laser

Monolithically integrated Cu(In,Ga)Se₂ mini‐modules were fabricated in order to reduce the width of patterning related dead area. The Cu(In,Ga)Se₂ layers were prepared on soda‐lime glasses using the multistage process at low substrate temperature below 500 °C. A picosecond laser with a wavelength of 532 nm was used for all of the structuring processes (P1, P2, and P3) for the monolithic integration. A “lift‐off” type structuring was applied for P1 and P3, and an “ablation” type was for P2. The laser structuring was optimized to be minimizing the dead area width, and the width of about 70 µm was successfully achieved. A mini‐module, in which the optimized structuring processes were applied for the integration, demonstrated a certified efficiency of 16.6%. Copyright © 2015 John Wiley & Sons, Ltd.     

Demonstration of the monolithic interconnection on CIS solar cells by picosecond laser structuring on 30 by 30 cm2 modules

In this paper, we present the selective structuring of all three patterns (P1, P2 and P3) of a monolithic interconnection of CIS (Cu(In,Ga)(S,Se)₂) thin film solar cells by picosecond laser pulses at a wavelength of 1064 nm. We show results for single pulse ablation threshold values and line scribing of molybdenum films on glass (P1), CIS on molybdenum (P2) and zinc oxide on CIS (P3). The purposes of these processes are the p‐type isolation (P1), cell interconnect (P2) and n‐type isolation (P3), which are required for complete cell architecture. The half micron thick molybdenum back electrode can be structured with a process speed of more than 15 m/s at about 15 W average power without detectable residues and damage by direct induced laser ablation from the back side (P1). The CIS layer can be structured selectively down to the molybdenum at process speeds up to 1 m/s at about 15 W average power, due to the precision of direct laser ablation in the ultrashort pulse regime (P2). The ZnO front electrode layer is separated by clean trenches with straight side walls at process speeds of up to 15 m/s at about 10 W average power, as a result of indirect induced laser ablation (P3). A validation of functionality of all processes is demonstrated on CIS solar cell modules (30 × 30 cm²). By replacing one state‐of‐the‐art process by a picosecond laser process at a time, solar efficiencies could be increased for P1 and P2 and stayed on a similar level for P3. After an optimization of the patterning processes in the R&D pilot line of AVANCIS, we achieved a new record efficiency for an all‐laser‐patterned CIS solar module: 14.7% as best value for the aperture area efficiency of a 30 × 30 cm² sized CIS module was reached. Copyright © 2014 John Wiley & Sons, Ltd.