子系统为S≥3的非线性大系统在近平衡区内的稳定性

本文采用文[1,2]中提出的平衡结构法研究子系统s≥3的非线性大系统在近平衡区内的稳定性;得到了判别这类大系统稳定性的两个一般性准则.     

检测骨架图形特征点的新方法

端点、折点、歧点和交点是骨架图形的重要特点是，提出用快速查表法检测侯选特征点，再进行侯选特征点聚集，用局部结构分析，去除假特征点，判别真特征点的类型，并对折点给以大致的定量描述。实验结果表明，该方法能快速有效地找出骨架图形的特征点，在目标识别、字符识别等应用中起着关键作用。     

Broadband Analysis of Holographic Power Combining Circuits

Holography is a promising technique for power combining applications in the frequency range of short millimeter and submillimeter waves. In this paper, quasi-optical holographic power combining circuits are investigated. An equivalent network is utilized which rigorously models horn arrays and biperiodic dielectric structures in order to design computer-generated holograms. We apply the network model to a 5-element quasi-optical power combiner and demonstrate its capability. The hologram is designed for 150 GHz and has an efficiency of 92.5 % with a 90 % bandwidth of 5.3 %. With the aid of a broadband waveguide power divider and a vector field measurement system, the circuit is analyzed.     

无线信道中的电波传播

分析了信号在无线信道中传输时所经受的两种衰落,介绍了主要的无线传播模型,在此基础上提出了对抗衰落的措施。     

通信用VRLA蓄电池可靠性指标及计算探讨

在说明通信局（站）电源系统对VRLA蓄电池组可靠性要求的基础上，阐述了为了达到电信设备的电压、电流需求，通过串联或串并联构成电池组的单体VRLA蓄电池应达到的可靠性指标。在确定单体VRLA蓄电池应达到的可靠性指标。在确定单体VRLA蓄电池可靠性参数时，可通过现场使用调查或加速寿命试验的办法来求得。在单体VRLA蓄电池可靠性指标过低的情况下，可通过多种冗余连接方式来提高电池组的可靠性。     

Na2CO3调质钙基脱硫剂硫化机理实验研究

对经Na2CO3溶液调质石灰石煅烧产物CaO的物理结构及硫化特性进行了研究,发现同等条件下调质后石灰石煅烧产物CaO(M-CaO)比未经调质的CaO(N-CaO)具有更高的钙转化率.利用XRD技术对CaO晶体结构进行了测定,通过比较二者的晶胞参数和晶格畸变度等并结合其孔特性,证实M-CaO之所以比N-CaO具有更高的钙转化率,是由于M-CaO比N-CaO具有更高的晶体缺陷浓度,使得在硫化反应过程中通过产物层的扩散具有更高的离子扩散率.     

Solved and unsolved problems in surface structure determination

The range of surface structural problems of interest in understanding the physics and chemistry of solid surfaces is reviewed with reference to the available methods and their strengths and limitations. Key challenges being addressed currently concern the achievable precision of measurements and their physical and chemical significance, and the complexity of the problems which may be solved. Past progress and future problems are illustrated with a series of examples ranging from the relaxation of simple clean metal surfaces through complex semiconductor reconstructions to large molecular adsorption and coadsorption systems and complex adsorbate-induced reconstructions. The strengths and limitations of scanning tunnelling microscopy as a complement to true quantitative structural methods are discussed, as is the role of chemical state specificity and elemental specificity in solving complex molecular adsorbate systems.     

受激喇曼散射在掺铒光纤放大器中的影响

本文在分析了均匀掺杂分布式光纤放大器（d－EDFA）的基础上，提出了沿传输方向掺杂浓度单调下降（单变），和降升结合（两变）的两种渐变型分布式光纤放大器，并用传输方程研究了透明传输和最佳掺杂浓度下，受激喇曼散射对均匀、单变和两变型三种d－EDFA的各种特性的影响．     

一种低压低功耗SRAM/SOI单元设计

提出一种改进4管自体偏压结构SRAM/SOI单元.基于TSUPREM4和MEDICI软件的模拟和结构性能的分析,设计单元结构并选取结构参数.该结构采用nMOS栅下的含p+埋沟的衬底体电阻代替传统6管CMOSSRAM单元中的pMOS元件,具有面积小、工艺简单的优点.该结构可以在0.5V的电源电压下正常工作,与6管单元相比,该单元瞬态响应正常,功耗只有6管单元的1/10,满足低压低功耗的要求.     

PIC单片机在激光电源中的应用研究

论述了单片机控制激光电源的原理，提出了产生PWM控制的基本思想及整个控制系统的硬件组成和软件设计方法。