采用区内C／I平衡的多区峰窝CDMA系统下行链路的性能

本文对采用区内Ｃ／Ｉ平衡的多区蜂窝ＣＤＭＡ系统下行链路的性能进行分析，给出两种区内Ｃ／Ｉ平衡算法并比较它们的性能，考虑呈对数正态分布的阴影和Ｒ＾－４规律的路径损失的综合影响，采用与传统不同的小区平均中断概率来评价系统的性能。     

Sequential Decoding of Convolutional Codes for Rayleigh Fading Channels

The performance of sequential decoding of long constraint length convolutional codes is evaluated for Rayleigh fading channels. Sequential decoding is not practical below a certain theoretical signal-to-noise ratio, and these theoretical limits are calculated for a number of modulation methods and code rates. As an example, with BPSK modulation, soft decisions and code rate 1/2, the theoretical signal-to-noise ratio per information bit is 5.7 dB. Above this limit the bit error rate can be made arbitrarily small by increasing the constraint length at no significant complexity cost. Furthermore, it is shown that with carefully chosen quantization steps, 8 level uniform quantization gives a negligible loss also for sequential decoding on a Rayleigh fading channel. Simulation results using 8 level quantization correspond well with the theoretical performance bounds. Also, the performance on a correlated channel with finite interleaving has been obtained. With an interleaver depth of 50×50 and a normalized doppler frequency equal to 0.01 we are only 0.5 dB away from the performance with perfect interleaving. Finally, bit error rate results show this scheme to compete well with Turbo codes.     

COMPACT COUPLED LINEAR TAPERED LINE BANDPASS FILTER WITH TWO TRANSMISSION ZEROS

A new compact bandpass filter composed of two coupled linear tapered line resonators (LTLRs) is designed. The two resonators are arranged in different layers. The filter has two transmission zeros on both sides of the passband. It has small size and steep response below its passband. It is also shown that this filter has 0.6 dB low insertion loss at the centre frequency and 10.5% 3dB bandwidth. This work was supported by the Development Foundation of Shanghai Educational Committee (217608) and Shanghai Leading Academic Discipline Project (T0102).     

A rational approximation and its applications to nonlinear partial differential equations on the whole line

An orthogonal system of rational functions is discussed. Some inverse inequalities, imbedding inequalities and approximation results are obtained. Two model problems are considered. The stabilities and convergences of proposed rational spectral schemes and rational pseudospectral schemes are proved. The techniques used in this paper are also applicable to other problems on the whole line. Numerical results show the efficiency of this approach.     

简谐速度噪声及其与势场之间的频率共振

为了描述复杂的噪声环境，考虑了一种具有频率结构的噪声——简谐速度噪声，包括它的产生、关联函数、功率谱以及作为热噪声时的频率特性所导致的一些行为.结果表明：在频谱空间中简谐速度噪声是一种带通噪声，存在一个峰值频率，且噪声带宽由参量Γ控制.当简谐势中的一个布朗粒子受热简谐速度噪声驱动时，粒子能量极大值出现在两种频率相等的情况下.这表明噪声和势场的频率之间存在动力学共振，决定着粒子能量的大小. 关键词： 简谐噪声 简谐速度噪声 功率谱 频率共振     

半导体激光器光束准直系统的功率耦合效率

在长距离无线光通信中，接收点光功率密度与光束发散角平方呈反比关系，为了获得小的发散角和大的功率耦合效率，要求准直系统有较大的数值孔径(NA)，但数值孔径过大会增加像差，因此合理设计功率耦合效率与准直系统的数值孔径就非常重要。该文对半导体激光器光束准直系统中功率耦合效率进行了研究，给出了半导体激光器光束功率耦合效率与k(孔径半径与孔径处等效光束半径之比)的关系表达式，并结合激光器光束准直系统，给出了半导体激光器光束功率耦合效率与准直系统数值孔径的关系表达式。该研究结论对于半导体激光器光束准直系统设计具有参考作用。     

用NILT导出的传输线瞬态分析模型

K Singhal与J Vlach的NILT(数值Laplace反变换) 技术是端接线性负载传输线分析的一种有效方法.本文利用这一NILT技术,导出了传输线的时域离散模型,由此可进行端接任意负载传输线的瞬态分析.这一模型毋须象通常的频域方法那样对传输线作有理逼近,因而不存在由此带来的数值问题,而计算量与它们相当.文中分别给出了均匀与非均匀传输线的处理,并用实例作了验证.     

移动通信系统中有效的身份认证方案和支付协议

文中给出了一个基于公钥密码的有效的身份认证和密钥交换协议，该协议可以实现通信双方的相互认证，产生的会话密钥对通信双方是公正的，且会话密钥的产生不需要其他第三方的参与，协议的结构简单，执行效率高：在此协议基础上设计了一个适用于移动通信系统的小额支付协议。     

IMPACCT: Methodology and Tools for Power-Aware Embedded Systems

Power-aware systems are those that must exploit a widerange of power/performance trade-offs in order to adapt to the power availabilityand application requirements. They require the integration of many novel powermanagement techniques, ranging from voltage scaling to subsystem shutdown.However, those techniques do not always compose synergistically with eachother; in fact, they can combine subtractively and often yield counterintuitive,and sometimes incorrect, results in the context of a complete system. Thiscan become a serious problem as more of these power aware systems are beingdeployed in mission critical applications.To address the problem of technique integration for power-aware embedded systems, we propose a new design tool framework called IMPACCT and the associated design methodology. The system modeling methodology includes application model for capturing timing/powerconstraints and mode dependencies at the system level. The tool performs power-awarescheduling and mode selection to ensure that all timing/power constraintsare satisfied and that all overhead is taken into account. IMPACCT then synthesizesthe implementation targeting a symmetric multiprocessor platform. Experimentalresults show that the increased dynamic range of power/performance settingsenabled a Mars rover to achieve significant acceleration while using lessenergy. More importantly, our tool correctly combines the state-of-the-arttechniques at the system level, thereby saving even experienced designersfrom many pitfalls of system-level power management.     

基于体全息技术的WDM器件

利用体全息技术制作波分复用器件是一种新方法。本文介绍了此种方法的基本原理和器件的基本性能，并报道了国外对该项技术的研究进展。