3D amorphous carbon and graphene co-modified LiFePO4 composite derived from polyol process as electrode for high power lithium-ion batteries

Amorphous carbon and graphene co-modified LiFePO_4 nanocomposite has been synthesized via a facile polyol process in connection with a following thermal treatment.Various characterization techniques,including XRD.Mossbauer spectra,Raman spectra,SEM,TEM,BET,O_2-TPO,galvano charge-discharge,CV and EIS were applied to investigate the phase composition,carbon content,morphological structure and electrochemical performance of the synthesized samples.The effect of introducing way of carbon sources on the properties and performance of LiFePO_4/C/graphene composite was paid special attention.Under optimized synthetic conditions,highly crystalized olivine-type LiFePO_4was successfully obtained with electron conductive Fe_2P and FeP as the main impurity phases.SEM and TEM analyses demonstrated the graphene sheets were randomly distributed inside the sample to create an open structured LiFePO_4 with respect to graphene,while the glucosederived carbon mainly coated over LiFeP04 particles which effectively connected the graphene sheets and LiFePO_4 particles to result in a more efficient charge transfer process.As a result,favorable electrochemical performance was achieved.The performance of the amorphous carbon-graphene co-modified LiFePO_4 was further progressively improved upon cycling in the first 200 cycles to reach a reversible specificcapacity as high as 97 mAh·g~(-1) at 10 C rate.     

A Novel 3D Heterobimetallic Cyano-bridged Coor- dination Polymer {（NH4）2[Cd（H20）Fe（CN）6]}n： Synthesis and Crystal Structure①

A novel heterobimetaUic coordination polymer, {（NH4）2[Cd（H20）Fe（CN）6]}n 1, has been synthesized by using the slow diffusion method and structurally characterized by elemental analysis, 1R spectroscopy and single-crystal X-ray diffraction. The crystal crystallizes in the monoclinic system, space group P21/n, a = 7.4202（16）, b = 14.939（3）, c = 10.868（2） A and ,8 = 91.660（3）°. For 1, five CN groups of Fe（CN）6]4- are involved in bridging. The polymer displays a 3D open microporous framework with 5-connected uninodal （46.64） topology.     

Hydrothermal Synthesis and Structural Characterization of a Novel 3-D Open Framework Zinc Phosphate Microporous Compound(C_5N_2H_(14))·[Zn_3(OH_2)(PO_4)_2(HPO_4)]

One novel organically templated zincophophate(C5N2H14)·[Zn3(OH2)(PO4)2(HPO4)] has been synthesized under hydrothermal conditions and characterized by single-crystal X-ray diffraction together with elemental analysis, infrared spectroscopy, thermogravimetric analysis, and powder X-ray diffraction. The title compound crystallizes in the monoclinic space group P21/n, with a = 9.7904(11), b = 14.0287(14), c = 11.8651(13) , β = 104.690(3), V = 1576.4(3) 3, Z = 4, T = 296(2) K, Mr = 601.31 and Dc = 2.533 g/cm3. The compound consists of a macroanionic [Zn3(OH2)(PO4)2(HPO4)]2- framework and(C5N2H14)2+ cations, and its structure is built up from ZnO3(OH2), ZnO4, HPO4 and PO4 tetrahedral units that result in 4, 8 and 10-ring channels.     

Structure and photophysical and electrochemical properties of a copper porphyrin complex with a three‐dimensional framework

Porphyrins and metalloporphyrins can generally show attractive structural motifs and interesting properties. A new copper porphyrin, namely poly[[μ‐chlorido‐[μ₅‐5,10,15,20‐tetrakis(pyridin‐4‐yl)‐21H,23H‐porphine]tricopper(I)] [aquadichloridocopper(II)]], {[Cu₃(C₄₀H₂₄N₈)Cl][CuCl₂(H₂O)]}_n ( 1 ), was synthesized by the self‐assembly of copper chloride with 5,10,15,20‐tetrakis(pyridin‐4‐yl)‐21H,23H‐porphine under solvothermal conditions. The structure of this copper porphyrin was characterized by single‐crystal X‐ray crystallography and elemental analysis. The porphyrin macrocycle shows a distorted saddle geometry, with the four pyrrole rings slightly distorted in an alternating mode either upwards or downwards. The copper ions show three‐coordinated triangular and four‐coordinated square‐planar geometries. Every copper–porphyrin unit connects to 12 others via four μ₄‐bridging Cu₂Cl moieties to complete the three‐dimensional framework of compound 1 , with isolated CuCl₂(H₂O) units located in the voids. This copper porphyrin displays a red photoluminescence. Electrochemical measurements showed that compound 1 has two redox waves (E_1/2 = ?160 and 91 mV).     

Poly(terephthalic anhydride) single crystals: Morphology and crystal structure

Single crystals of poly(terephthalic anhydride) (PTA) have been grown using the confined thin film melt polymerization technique. Thin lamellae (ca. 50 Å) are found for low polymerization temperatures, with thick crystals forming for polymerization at 200°C. Shearing of the material shortly after the initiation of polymerization at 200°C yielded single crystal domains composed of fibrillar texture material; these samples gave [010] zone ED patterns complementing the [001] zone patterns from the unsheared CTFMP samples. A monoclinic, single chain, two repeat unit, unit cell (Pc11) is proposed based on four different electron diffraction zone patterns: a = 6.01 Å, b = 3.94₅ Å, c = 14.11 Å, α = 106.9°. Simulations, using the Cerius² program, of the corresponding molecular conformation, packing and electron diffraction (ED) patterns were performed; the ED simulations are in good agreement with the observed patterns. An R-factor of 0.23 is obtained based on a comparison of calculated and observed structure factors for the 39 independent ED reflections observed on the different zone patterns. © 1996 John Wiley & Sons, Inc.     

Nanoparticles from vesicle polymerization: Characterization and kinetic study

The polymerization of isodecyl acrylate (ISODAC) in vesicles made from an anionic surfactant—sodium di-2-ethylhexyl phosphate (SEHP)—and from water is studied by ¹H-NMR, transmission electron microscopy, and quasielastic light scattering. High polymerization rates and high conversion rates are achieved with both water-soluble initiator, K₂S₂O₈ (potassium persulfate), and oil-soluble initiator, AIBN (azoisobisbutyronitrile). ISODAC is probably located inside the vesicle bilayer(s) because of its high hydrophobicity. Particles stable at room temperature with a mean diameter of about 50 nm are obtained. Kinetic orders of ISODAC polymerization are determined and the characterization of the resulting particles during and after polymerization are studied. © 1996 John Wiley & Sons, Inc.     

FINITE ELEMENT ANALYSIS OF ANISOTROPIC FLUID SUSPENSIONS

The orientation tensor L is introduced to construct a modified Leslie–Ericksen model for the viscous, incompressible flow of anisotropic suspensions (including electric field effects). This is then utilized to develop a weak variational formulation and finite element scheme for computing the flow and orientation fields. Numerical results are presented for exploratory test problems.     

Side-chain liquid crystalline polymers: The synthesis and characterization of poly[4-nitrothiophenyl-4-(ω-methacryloyl oxyalkyloxy)] benzoate

A new series of sulfur-containing side-chain liquid crystalline polymer is described. Mesomorphic side chains with methylene spacers of different lengths have been synthesized, and their structures were identified by nuclear magnetic resonance, infrared and mass spectrometry. The liquid crystalline nature of the polymers was characterized by microscopy and differential scanning calorimetry.