二维网状铜(Ⅱ)配合物的合成及晶体结构表征

A Cu(Ⅱ) complex [Cu(L)_1.5(OSO₃)]·3H₂O (1) [L=1,4-bis(imidazol-1-yl)benzene] was synthesized by reaction of ligand L with CuSO₄·5H₂O using solvothermal method and its structure was determined by X-ray crystal structure analysis. The structure indicates that the complex crystallizes in triclinic, space group P1 with a=0.948 8(2), b=1.078 5(2), c=1.108 4(2) nm, α=74.820(2), β=81.331(2), γ=72.638(2)°, V=1.041 5(3) nm³, Z=2, D_calc=1.687 g·cm^-3, F(000)=544, μ=1.205 cm^-1, the final R=0.062 3 and wR=0.132 8. The Cu(Ⅱ) atom has distorted square-pyramidal environment with a N₃O₂ donor set. Each L ligand links two Cu(Ⅱ) atoms using its imidazole groups to form an infinite one-dimensional (1D) ladder-like chain, which further linked by SO₄^2- to form a two-dimensional (2D) network structure. The 2D sheets are further connected by C-H…O hydrogen bonds to give a three-dimensional (3D) structure. CCDC: 650388.     

雷酚萜醇的结构研究

雷酚萜醇属雷公藤二萜类化合物。雷公藤(Tripterygium wilfordii Hook f)系卫矛科(Celastraceae)雷公藤属植物。民间用于治疗风湿病、抗炎、抗肿瘤及抑制免疫系统等。     

Synthesis and structural characterization of 3-thienyl alkyl imides

Five new thiophene imides having the structures C₄H₃SC(O)N(H)C(O)R (where R=Me, Et, Pr, t-Bu, 1-4) and C₄H₃SCH₂C(O)N(H)C(O)CH₃5 have been prepared. Control over the orientation of the carbonyl groups was achieved by the introduction of a bulky group in the terminal position of the side chain, and molecular modeling calculations indicated that the energy difference between the ct and tt conformations is small. The acidity of 1-4 decreases from Me to t-Bu, and, although 1-4 will not undergo oxidative polymerization, the introduction of a single spacer CH₂ group allows 5 to polymerize.     

铅在铂电极上的还原电位溶出分析法

研究了以亚铁氰化钾为还原剂铅在铂电极上的还原电位溶出法；讨论了电极的预处理、阳极富集和随后的还原电位溶出及铅测定的干扰。     

还原温度对超细K－Co－Mo催化剂合成低碳醇性能的影响

 用溶胶－凝胶法合成了K－Co－Mo催化剂．样品经不同温度还原后，用于低碳醇的合成．XRD和HRTEM结果表明，样品是超细粒子，粒子尺寸为2～5nm．考察了催化剂的还原温度和反应条件对催化剂性能的影响．实验结果表明，还原温度对催化剂的活性有较大的影响，最佳还原温度为500℃．最佳反应温度范围为310～330℃．升高压力和空速可以提高醇的收率和选择性．在空速14400h－1，压力6．0MPa和温度310℃的条件下，醇的选择性为55．8％，收率为520．0g／（kg·h），MeOH／C2＋OH为0．27．催化剂稳定性良好，在200h的寿命实验中，活性基本不变．与文献中催化剂相比，超细K－Co－Mo催化剂对合成醇具有较高的活性和选择性，尤其是对C2＋OH的合成明显高于其他合成醇催化剂体系．     

高分辨双晶XRF研究酞菁化合物中硫杂质的化学态

酞菁化合物是一种大π键共轭体系的平面分子结构，它以颜色鲜艳、化学稳定性和价格便宜等特点，已在颜料工业上得到了广泛地应用．随着高科技的发展，酞菁化合物的应用进入静电复印的领域．研究中发现：酞普化合物的晶体结构直接影响它的色泽、耐热性、稳定性以及光电导性．在诸多的酸苦晶型中，β-型酞菁是比较稳定的一种，其它晶型届亚稳态型．近年来，光敏性较好的X-型用于激光印刷机感光鼓的载流子产生层［1］．用作静电复印中的酞育粗颜料，一般多为a一型，且含有大量的有机和无机杂质[2]，经高温真空升华提纯后，转变为卢一型．有趣…     

Thermoanalytical investigation of layered titanium salts

The investigated materials have similar routes of thermal decomposition; i.e. they lose their crystal water first, then at a higher temperature their structural one. At least the result TiP₂O₇ goes through a phase change at about 1000 K. The amorphous titanium phosphate lost its crystal and structural water at higher temperature than those of crystalline forms. Both α- and γ-titanium phosphates and also their transition metal containing forms have layered structure. In case of α- and γ-forms after the loss of crystal water a phase change occurs which is followed by the decomposition of the molecule. Various transition metals containing γ-titanium phosphates lose their crystal water at the same temperature, with the exception of Ni containing ones. The process is finished in this case at temperature 90 K higher than that of the others. This revised version was published online in July 2006 with corrections to the Cover Date.     

3,3,6,6-四甲基-9-邻氯苯基-1,8-二氧代-3,4,5,6,7,9-六氧化氧杂蒽的合成和晶体结构

标题化合物C23H25对O3Cl是由邻氯苯甲醛与5，5-二甲基1，3-环己二酮在N，N-二甲基甲酸腹中反应而得。结构通过单晶X-射线衍射法确定，其晶体属于单科晶系，空间群=1632。晶体结构用直接法解出，使用全矩阵最小二乘法对原子参数进行修正，最后的偏离因子为R=0．054，Rw一0．063。在晶体结构中，吡喃环与苯环之间的两面角为92．43°。     

二(三甲硅基环戊二烯基)二氯合锆的合成和晶体结构

在 THF中 ,通过三甲硅基环戊二烯基锂与四氯化锆反应合成了标题化合物 ,经元素分析 ,IR和 1 H NMR谱表征了其结构 ,并用 X-射线衍射测定了晶体结构 ,该晶体属于三斜晶系 ,空间群为 P1 ,晶体学参数 :a=0 .6787(6) ,b=1 .2 92 4 (2 ) ,c=1 .30 34(2 ) nm,α=67.83(1 ) ,β=82 .50 (3) ,γ=75.64 (3)°,V=1 .0 2 5nm3 ,Z=2 ,Dx=1 .41 5 g· cm-3 ,μ=8.989cm-1 ,F (0 0 0 ) =448,R=0 .0 32。质谱研究表明 ,化合物在质谱过程中发生二聚 C*p2 ZrClZr C*P2Cl(C*P=C5H4Si Me3 )。