Superheating Limit of Boiling n-Hexane Spinodal Decomposition Versus Nucleation Process

Two predicative theories for superheating limits of a boiling liquid are considered in this work. In the nucleation picture, classical homogeneous nucleation theory is used to calculate superheating temperature at various pressures. In spinodal decomposition picture, stability limits are taken as the superheating temperature. A perturbed-hard chain equation of state was developed and used for the purpose of calculating mechanical stability limit. Calculations are done for the case of normal hexane at different pressures and compared with experimental results. Classical nucleation theory gives good prediction at negative and smaller pressures. While near critical pressure, spinodal picture seems to be more accurate.     

Chemical reaction dynamics of PeCB and TCDD decomposition: A tight‐binding quantum chemical molecular dynamics study with first‐principles parameterization

The decomposition reaction dynamics of 2,3,4,4′,5‐penta‐chlorinated biphenyl (2,3,4,4′,5‐PeCB), 3,3′,4,4′,5‐penta‐chlorinated biphenyl (3,3′,4,4′,5‐PeCB), and 2,3,7,8‐tetra‐chlorinated dibenzo‐p‐dioxin (2,3,7,8‐TCDD) was clarified for the first time at atomic and electronic levels, using our novel tight‐binding quantum chemical molecular dynamics method with first‐principles parameterization. The calculation speed of our new method is over 5000 times faster than that of the conventional first‐principles molecular dynamics method. We confirmed that the structure, energy, and electronic states of the above molecules calculated by our new method are quantitatively consistent with those by first‐principles calculations. After the confirmation of our methodology, we investigated the decomposition reaction dynamics of the above molecules and the calculated dynamic behaviors indicate that the oxidation of the 2,3,4,4′,5‐PeCB, 3,3′,4,4′,5‐PeCB, and 2,3,7,8‐TCDD proceeds through an epoxide intermediate, which is in good agreement with the previous experimental reports and consistent with our static density functional theory calculations. These results proved that our new tight‐binding quantum chemical molecular dynamics method with first‐principles parameterization is an effective tool to clarify the chemical reaction dynamics at reaction temperatures. © 2004 Wiley Periodicals, Inc. Int J Quantum Chem, 2005     

Preparation and reactivity of metal-containing monomers

The thermal decomposition of iron (III) acrylate, [Fe₃O(CH₂=CHCOO)₆ · 3H₂O]OH (FeAcr), a monomer with a complex cluster cation, has been studied at 200–370 °C. Thermal transformations of FeAcr occur in two temperature regions. The rates of gas evolution in the low temperature region (200–300 °C) and the high temperature region (300–370 °C) are described by first-order equations withk=4.2 · 10²¹exp[−59000/(RT)] s⁻¹ andk=1.3 · 10⁶exp[−30500/(RT)] s⁻¹, respectively. A study of the qualitative and quantitative composition of the products of FeAcr thermolysis was carried out. The thermal transformation of FeAcr is a complex process of dehydration, degradation, and polymerization in the solid phase followed by decarboxylation of the metal-carboxyl groups of the polymer. for part 33 see Ref. 1. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 1743–1750, October, 1993.     

Pressurized wet digestion in open vessels

The High Pressure Asher (HPA-S) was adapted with a Teflon liner for pressurized wet digestion in open vessels. The autoclave was partly filled with water containing 5% (vol/vol) hydrogen peroxide. The digestion vessels dipped partly into the water or were arranged on top of the water by means of a special rack made of titanium or PTFE-coated stainless steel. The HPA-S was closed and pressurized with nitrogen up to 100 bars. The maximum digestion temperature was 250 °C for PFA vessels and 270 °C for quartz vessels. Digestion vessels made of quartz or PFA-Teflon with volumes between 1.5 mL (auto sampler cups) and 50 mL were tested. The maximum sample amount for quartz vessels was 0.5–1.5 g and for PFA vessels 0.2–0.5 g, depending on the material. Higher sample intake may lead to fast reactions with losses of digestion solution. The samples were digested with 5 mL HNO₃ or with 2 mL HNO₃+6 mL H₂O+2 mL H₂O₂. The total digestion time was 90–120 min and 30 min for cooling down to room temperature. Auto sampler cups made of PFA were used as digestion vessels for GFAAS. Sample material (50 mg) was digested with 0.2 mL HNO₃+0.5 mL H₂O+0.2 mL H₂O₂. The analytical data of nine certified reference materials are also within the confidential intervals for volatile elements like mercury, selenium and arsenic. No cross contamination between the digestion vessels could be observed. Due to the high gas pressure, the diffusion rate of volatile species is low and losses of elements by volatilisation could be observed only with diluted nitric acid and vessels with large cross section. In addition, cocoa, walnuts, nicotinic acid, pumpkin seeds, lubrication oil, straw, polyethylene and coal were digested and the TOC values measured. The residual carbon content came to 0.2–10% depending on the sample matrix and amount.     

Numerical comparison of several variable-metric algorithms

The paper compares the numerical performances of the LDL decomposition of the BFGS variable-metric algorithm, the Dennis-Mei dogleg algorithm on the BFGS update, and Davidon's projections with the BFGS update with the straight BFGS update on a number of standard test problems. Numerical results indicate that the standard BFGS algorithm is superior to all of the more complex strategies.This research was supported by the National Science Foundation under Research Grant No. MCS77-07327.     

Reaction ofN-(3,3,3-trifluoro-2-trifluoromethylprop-1-enyl)dimethylamine with MgSO4·7H2O. Synthesis of 4,4-difluoro-5-trifluoromethyl-2-(2,2,2-trifluoro-1-trifluoromethylethyl)-4H-1,3-dioxine andcis/trans-3-dimethylamino-2-trifluoromethacryloyl fluoride

4,4-Difluoro-5-trifluoromethyl-2-(2,2,2-trifluoro-1-trifluoromethylethyl)-4H-1,3-dioxine andcis/trans-3-dimethylamino-2-trifluoromethacryloyl fluoride were obtained by reaction ofN-(3,3,3-trifluoro-2-trifluoromethylprop-1-enyl)dimethylamine with MgSO₄·7H₂O. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 1069–1071, May, 1997.     

Polyurethane anionomers synthesised with aromatic, aliphatic or cycloaliphatic diisocyanates, polyoxyethylene glycol and 2,2-bis-(hydroxymethyl)propionic acid. Part II. Supermolecular structure. Thermal properties

Small angle X-ray scattering and differential scanning calorimetry methods were employed to characterise the internal order of structural phases present in polyurethane coatings obtained as a result of water evaporation from anionomer dispersions. Those anionomers were produced in the reaction of aromatic, cycloaliphatic and aliphatic diisocyanates with polyoxyethylene glycol, 2,2-bis-(hydroxymethyl)propionic acid and 1,6-hexamethylenediamine. The decisive effects were found from ionic and polar structures within the rigid urethane and urea segments on the ordered arrangement degree of the supermolecular structures in the obtained anionomers. That becomes apparent in differential scanning calorimetry thermograms and contributes to improved thermal stability of the produced polyurethane coatings.     

Thermal and other properties of complexes of Mn(II), Co(II) and Ni(II) with 2,2'-bipyridine and trichloroacetates

Complexes of the general formulae Mn(2-bpy)₂(CCl₃COO)₂, Co(2-bpy)₂(CCl₃COO)₂·H₂O and Ni(2-bpy)₂(CCl₃COO)₂·2H₂O (where: 2-bpy=2,2'-bipyridine) have been prepared and characterized by VIS and IR spectroscopy, conductivity and magnetic measurements. The thermal properties of complexes in the solid state were studied under non-isothermal conditions in air atmosphere. During heating the complexes decompose via different intermediate products to the oxides Mn₃O₄, CoO and NiO. A coupled TG-MS system was used to detection the principal volatile products of thermal decomposition and fragmentation processes of obtained compounds. The principal volatile products of thermal decomposition of complexes are: H₂O⁺, CO₂ ⁺, Cl₂ ⁺ and other. This revised version was published online in August 2006 with corrections to the Cover Date.     

The effect of calcination conditions on the superconducting properties of Y−Ba−Cu−O powders

Calcination conditions of the precursor powders, i.e. temperature, type of atmosphere and duration, were determined with a view to obtain superconducting powders with the most advantageous physico-chemical properties. Investigated were powders in the Y?Ba?Cu?O system prepared by the sol-gel method. Thermogravimetric examinations of the powders have revealed that the decomposition kinetics of BaCO₃ determines the formation rate of the superconducting YBa₂Cu₃O_7?x (‘123’) phase. It follows from the decomposition kinetics of BaCO₃ that the process is the most intensive in argon, whereas in static air and oxygen it is the slowest. The phase composition analysis (XRD) and low-temperature magnetic susceptibility measurements of the calcinated powders, confirm the above mentioned changes in the decomposition kinetics. The reaction of barium carbonate can be completed if the calcination process is conducted at the temperature of 850°C for 25 h, yielding easily sinterable powders for obtaining single-phase superconducting bulk samples with advantageous functional parameters.     

Attractive halogen–halogen interactions: F3CCl⋯FH and F3CCl⋯FCH3 dimers

The F₃CCl?FH and F₃CCl?FCH₃ dimers, which feature the halogen–halogen contacts, are investigated at MP2/6–311++G(d,p) and MP2/aug–cc–pVDZ levels of approximation. The binding energies of these complexes are found to be comparable to those of the weak hydrogen bonds. In both complexes the Cl?F are found to be significantly shorter than the sum of the corresponding van der Waals radii. The C–Cl?F contacts are also found to exhibit certain deviation from linearity. However, the energy differences between linear and bent structures are very small and primarily accounted for by electrostatic interactions between remote parts of the dimer. This indicates a high conformational flexibility of the halogen–halogen contacts and may help to explain the diversity of structural features in crystals formed by halogen-containing molecules. In both dimers the halogen–halogen interaction leads to certain shortening of the C–Cl electron accepting bond. This is accompanied by a small increase of the C–Cl stretching frequency. Hence, the two investigated dimers can possibly be classified as the blue-shifting halogen–halogen contacts.