A comparative study on the thermal decomposition of some transition metal carboxylates

Thermal decomposition of transition metal malonates, MCH₂C₂O₄?xH₂O and transition metal succinates, M(CH₂)₂C₂O₄?xH₂O (M=Mn, Fe, Co, Ni, Cu, Zn) has been studied employing TG, DTG, DTA, XRD, SEM, IR and Mössbauer spectroscopic techniques. After dehydration, the anhydrous metal malonates and succinates decompose directly to their respective metal oxides in the temperature ranges 310–400 and 400–525°C, respectively. The oxides obtained have been found to be nanosized. The thermal stability of succinates have been found to be higher than that of the respective malonates.     

Cu，Pd－ZSM－5上NO分解和CO氧化的催化作用

双交换Ｃｕ，ｐｄ－ＺＳＭ－５催化剂（Ｃｕ交换度为１０５％，Ｐｄ交换度分别为３．４％和３３％）对ＣＯ氧化反应有活性增强作用，对ＮＯ分解反应不存在增强效应．双交换催化剂在于交换程序不同，而表面物种不同，活性组分的分布状态不同，因而有不同的活性．先交换Ｃｕ，４００℃焙烧后再交换ｐｄ的Ｃｕ－Ｐｄ－ＺＳＭ－５催化剂，对上述两类反应的活性存双组分催化剂中均为最高．Ｈ_２－ＴＰＲ谱表明，共交换的Ｃｕ－Ｐｄ－ＺＳＭ－５中尚有部分ＣｕＣｌ＋占据了部分交换位置，而使ＣＯ氧化活性稍有下降．Ｎ_２－ＤＴＡ和Ｈ_２－ＴＰＲ谱结果表明，Ｐｄ交换到Ｃｕ－ＺＳＭ－５中后，抑制了吸附水和水合铜化合物的形成，由此提高了在２００—３００℃时氧的吸附量．后者的大小和ＣＯ氧化活性有顺变关系．Ｎ_２－ＤＴＡ谱中３４０—４４５℃的放热峰可能分别表征了和ＮＯ分解活性有关的铜氧桥或把氧桥的形成，该放热峰的峰温愈低，峰面积愈大，则ＮＯ分解活性愈高．     

四种溴代甲苯异构体的质谱区分

本工作用四种较新的质谱技术(碰撞诱导解离(CID),电荷剥离(CS),电荷分离(CSe),电子捕获诱导解离(ECID)谱研究了邻、间、对溴甲苯和溴化苄四种异构体。四种技术在一定程度上都可区分这些异构体。其中比较四种异构体ECID谱中ECID峰的相对强度可得到满意的区分效果。     

Obtaining Kinetic Parameters by Modulated Thermogravimetry

A new technique, called modulated thermogravimetry, is introduced as a tool for obtaining continuous kinetic information for decomposition and volatilization reactions. The approach makes use of an oscillatory temperature program to obtain kinetic parameters during a mass loss. MTGA™ may be used under quasi-isothermal conditions to observe a single mass loss or may be combined with linear heating rate or Hi-Res™ controlled rate thermogravimetry to scan from one mass loss region to another. Results obtained are in agreement with those obtained by other kinetic methods. This revised version was published online in July 2006 with corrections to the Cover Date.     

Excess molar heat capacities of ((<Emphasis Type="Italic">R</Emphasis>)-(+)-α-pinene+(<Emphasis Type="Italic">S</Emphasis>)-(-)- α-pinene) at temperatures between 293.15-308.15 K

Summary {\rtf1\ansi\ansicpg1250\deff0\deflang1038\deflangfe1038\deftab708{\fonttbl{\f0\froman\fprq2\fcharset238{\*\fname Times New Roman;}Times New Roman CE;}} \viewkind4\uc1\pard\f0\fs20 New explanations are given for two types of irregular thermogravimetric (TG) data. A TG relationship between mass and temperature is derived on the basis of migration behavior of bubbles generated in bulk of sample system, and superposed on that derived on the basis of kinetics of the 4\super th\nosupersub order event, which is superposed on the experimental TG data obtained from three reference papers. This suggests that these TG data are reflecting migration of bubbles. A dependence of TG behavior on heating rate, which is contrary to usual that, is shown and is explained in terms of event-rate determination by boiling. \par }     

Thermal Decomposition Characteristics of 1,7-Diazido-2,4,6-trinitrazaheptane and its Application in Propellants

The thermal decomposition characteristics of1,7-diazido-2,4,6-trinitrazaheptane (DATH) and multi-component systems containing DATH were studied by using DSC, TG and DTG techniques. Three –NO₂ groups in the DATH molecule break away first from the main chain when DATH is heated up to 200°C. Following this process, the azido groups and the residual molecule decompose rapidly to release a great deal of heat within a short time. In the multi-component systems, DATH undergoes a strong interaction with the binder of the double-base propellant and a weak interaction with RDX. The burning rates of the two propellants were determined by using a Crawford bomb. The results showed that the burning rate rises by about 19–66% when 23.5%DATH is substituted for RDX in a minimum smoke propellant. Meanwhile, the N₂ level in the combustion gases is enhanced, which is valuable for a reduction of the signal level of the solid propellant. This revised version was published online in July 2006 with corrections to the Cover Date.     

Preparation and thermal analysis of synthetic malachite CuCO3·Cu(OH)2

The synthesis of malachite CuCO₃·Cu(OH)₂ or Cu₂CO₃(OH)₂ was studied through titrations of copper(II) salt solutions with a solution of sodium carbonate at different temperatures. The precipitates were characterized by TG, IR and chemical analysis. The composition varies depending on thepH of the solution and the temperature. Purer malachite was synthesized by simple mixing of a solution of copper(II) nitrate or sulfate with a solution of sodium carbonate at 50°C.The kinetics of the thermal decomposition of synthetic malachite was described by eitherR ₃ orA _m(m=1.2–1.4) law, according to TG analysis, both isothermal and nonisothermal. The Arrhenius parameters determined using three different integral methods showed the kinetic compensation effect, which is correlated to the working temperature interval analyzed.The authors thank Mr. H. Takemoto for analyzing kinetics of the thermal decomposition of synthetic malachite.     

Al_(70)Cu_(30)合金液态RDF高斯分解与局域结构计算

运用密度泛函B3LYP方法对AlmCun(m,n≤4)团簇结构进行量子化学计算,得到团簇的稳定构型。对不同温度下X-射线衍射实验所得的径向分布函数(RDF)在0.2～0.4nm范围内做高斯分解,结合计算结果对高斯峰的意义做了解释,认为计算所得部分团簇构型可以代表Al70Cu30合金熔体的内部局域结构。     

三价铬与丙二酸形成的配合物的热解过程研究

利用热重分析及原位红外光谱等方法，定性、定量地研究了三价铬和丙二酸形成的配合物［Ｃｒ（Ｃ３Ｈ２Ｏ４）（Ｈ２Ｏ）］［Ｃｒ（Ｃ３Ｈ２Ｏ４）２（Ｈ２Ｏ）２］·４Ｈ２Ｏ的热解过程，提出了室温至４００℃下的详细热解途径．基于多种实验结果，分析了螯合物中六员环的化学键断裂方式，并由配合物的快原子轰击质谱（ＦＡＢ－ＭＳ）加以佐证．     

Calorimetric and Thermal Investigation of Metal Derivatives of 6-aminopicolinic Acid

The comparison of thermal and calorimetric properties of metal derivatives of 6-aminopicolinic acid (APH) is presented. The salts and complexes of APH with Cr(III), Cd(II), Cu(II), Ni(II), Pb(II), Co(II)and Ag(I) have been studied by TG-DTA and DSC methods up to 1200°C in a nitrogen atmosphere. Decomposition processes are proposed. The decarboxylation, deamination and carbonation of the organic fragments of molecules take place. The compounds decompose to metal or to metal oxides. The values of the transition enthalpy were determinated. This revised version was published online in August 2006 with corrections to the Cover Date.